How to Identify a Case for an iPad 10.2

How to Identify a Case for an iPad 10.2

Originally published Sept 30, 2019

This page covers cases that we support for keyguards to fit the 10.2" iPad 7th, 8th and 9th Generation.

If you have an iPad other than a 7th-8th-9th Gen. 10.2, you're on the wrong page.

For any other iPad, look here.

When you order a keyguard for an iPad 7th Gen. 10.2, specify the name and number of the case you find here.  You must use the red number to correctly identify a case!  Cases are listed alphabetically, but you can also search the page by the name of an iPad case to find one that is sold under more than one brand name.

If you have an iPad 10.2" case that we don't have depicted here, specify "Other" case when ordering a keyguard and send us a link to the case you have.  We'll charge you a small fee to buy the case, measure it, design a keyguard to fit it, and make and test fit the keyguard.  After that, we'll add it to our list so you can order keyguards to fit it in the future.

ltrop

3sixt-357.jpg

3SIXT Rugged Case for iPad 7th-8th Gen. 10.2 #357

  • Screen opening: 8-1/4" x 6-3/16", 209 mm x 158 mm
  • Outside dimensions: 10-5/16" x 7-5/16" x 3/4", 262 mm x 186 mm x 20 mm   
  • Silicone skin over hard plastic shell
  • Built-in off-centered folding stand makes it a little unstable
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
aceguarder-337.jpg

ACEGUARDER Antibacterial Kickstand iPad 7th-8th Gen 10.2/Air 10.5/Pro 10.5 #337

There are three versions of this case, identical for keyguard purposes, but with a different kickstand on the back. The Version on the left just has a small kickstand with attachable shoulder strap (not included) on it. The version shown on the bottom has a small rotating kickstand with some adjustability, and locations in the back corners where you can attach a shoulder strap (not included).  The version on the right has a wider non-rotating kickstand that is more stable and more adjustable, and it does not have the shoulder strap attachment.

  • Screen opening: 8-7/16" x 6-3/8", 215 mm x 161 mm
  • Outside dimensions: 10-11/16" x 7-11/16" x 11/16", 271 mm x 195 mm x 17 mm 
  • Elastic skin over polycarbonate shell
  • Adjustable stand
  • Comes in several colors
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
adaptive-tech-rugged-rubber.png

Adaptive Tech Solutions Rugged Rubber

The Rugged Rubber case is a variant of the classic EVA folding handle stand. Adaptive Tech Solution's version adds a shoulder strap.

To order a keyguard for the Rugged Rubber, choose the matching  Classic EVA case below.

adenk-427.jpg

Adenk/SUPLIK Case w/ Removable Screen Protector iPad 7th-8th Gen 10.2 #427

This case is sold under a variety of brand names.  It's easy to spot because of the distinctive openings on the upper corners where a shoulder strap (not included) could be attached.

  • Screen opening: 8-9/16" x 6-7/16", 218 mm x 163 mm
  • Outside dimensions (with handle): 10-3/4" x 11" x 15/16"", 273 mm x 278 mm x 25 mm
  • Removable front bezel with built-in screen protector
  • Impact-resistant EVA material
  • Comes in a variety of colors 
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change (weak)
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
adocham-317.jpg

Adocham/TopEsct Steering Wheel iPad 7th-8th Gen. 10.2, Air 3 10.5, Pro 10.5 #317

  • Screen opening: 8-13/16" x 6-5/16", 224 mm x 161 mm
  • Outside dimensions (including handles): 12-5/16" x 8-3/8" x 3/4", 312 mm x 213 mm x 20 mm   
  • Comes in several colors
  • Has a Apple pen holder
  • Made out of silicone
  • Built in stand
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
seymac-346.jpg

Ambison/SEYMAC Three Layer Rotating Handle Stand iPad 7th-8th Gen 10.2 #346

This case is sold under several different brand names. To order a keyguard for this case, specify the SEYMAC case #346 as your case.

iadapter-190.jpg

AMDI iAdapter 10 for iPad 7th-8th Gen 10.2/Air 3 10.5/Pro 10.5 #190

  • Screen opening: 8-1/2 " x 6-7/16", 216 mm x 163 mm
  • Outside dimensions: 11 x 8-1/2" x, 280 mm x 216 mm
  • Comes with handle, shoulder strap, and folding stand
  • Built-in amplified speakers
  • Available in black only. Optional colored skins may be added.
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
armor-x-381.jpg

ARMOR-X Rainproof for iPad 7th-8th Gen. 10.2 #381

This case is sold under a variety of brand names, especially in Australia, where it is often named with the brand of the website selling it.

  • Screen opening: 8-9/16" x 6-3/8", 217 mm x 162 mm
  • Outside dimensions: 10-3/8" x 7-5/16" x 11/16", 263 mm x 186 mm x 17 mm
  • built-in screen protector
  • Kickstand is in the center for equal balance
Best Attachment Snap-In or lock-in for permanent mounting, 
Possible Attachment Straps (last resort), Velcro for quick change
Not Suitable for Suction cups, suction tape, magnets
miesh-383.jpg

ARMOR-X/CTA/Miesherk Rotating Handle Stand iPad 7th-8th Gen. 10.2 #383

This case is sold under a variety of brand names. To order a keyguard for this case, choose the ARMOR-X case #383

  • Screen opening: 8-1/2" x 6-3/8", 217 mm x 163mm
  • Outside dimensions: 10-5/16" x 7-5/16" x 5/8", 262 mm x 186 mm x 17 mm
  • Kickstand is in the center for equal balance
Best Attachment Snap-In or lock-in for permanent mounting,
Possible Attachment Velcro for quick change (Not very strong), straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
moko-388.jpg

ARMOR-X/Moko Waterproof iPad 7th-8th Gen 10.2 #388

This case is sold under a variety of brand names. To order a keyguard for this case, choose the ARMOR-X case #388

  • Screen opening: 8-5/8" x 6-1/2", 218 mm x 165 mm
  • Outside dimensions: 10-7/16" x 7-7/16" x 9/16", 265 mm x 189 mm x 14 mm
Best Attachment Snap-in or lock-in for permanent mounting (no longer waterproof), Velcro for quick change           
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
armor-box-77.jpg

ArmorBox Kido

The ArmorBox Kido case is a variant of the classic EVA folding handle stand.

To order a keyguard for the ArmorBox Kido, choose the matching  Classic EVA case below.

ltrop-430.jpg

AVAWO/LTROP "Iron Man" Case iPad Air/Air 2/Pro 9.7/5th-6th Gen 10.2 #430

This case is sold under several different brand names.  To order a keyguard to fit this case under any of those brands, choose the  LTROP case #430 from our "To Fit Case" list.

avawo-kids-case.jpg

Avawo Kids Case

The Avawo Kids Case is a variant of the classic EVA folding handle stand.

To order a keyguard for the Avawo Kids Case, choose the matching  Classic EVA case below.

azzsy-332a.jpg

Azzsy Slim for iPad 7th-8th Gen. 10.2 #332A

  • Screen opening: 8-1/4" x 6-1/4", 210 mm x 159 mm
  • Outside dimensions: 10-5/16" x 7-5/16" x 3/4", 263 mm x 186 mm x 19 mm   
  • Silicone skin over hard plastic shell
  • Built-in off-centered folding stand makes it a little unstable
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
bambino-377.jpg

Bam Bino Space Suit for iPad 7th-8th-9th Gen 10.2/Air 3 10.5/Pro 10.5  #377

Not to be confused with a similar-looking Bam Bino case.  That one has straight sides.  The Space Suit has sides that curve inward.

  • Screen opening: 8-9/16" x 6-7/16", 218 mm x 163 mm
  • Outside dimensions (with handle and folded feet): 11-1/16" x 9-5/16" x 1-3/16", 281 mm x 236 mm x 30 mm
  • EVA foam case
  • Distinctive arched handle
  • Two folding plastic stands behind the lower corners
  • Built-in carrying handle
  • Comes in a couple colors
Best Attachment Snap-in or lock-in for permanent mounting 
Possible Attachment Suction cups, suction tape, straps (last resort) Velcro (Not very strong)
Not Suitable for Magnets
batyue-395.jpg

BATYUE Rotating Handle iPad 7th-8th-9th Gen 10.2 #395

  • Screen opening: 8-3/16" x 6-3/16", 209 mm x 158 mm
  • Outside dimensions (not including rotating handle): 10-5/16" x 7-11/16" x 7/8", 262 mm x 195 mm x 21 mm
  • Three layer design
  • Elastic skin over hard plastic frame
  • Removable front screen bezel clips on securely
  • Rotating adjustable handle
  • Elastic holder for Apple Pencil on back handle
  • Sturdy construction and a good value
  • Comes in several funky colors
  • Best Attachment Snap-in or lock-in for permanent mounting 
    Possible Attachment Velcro, magnets, straps (last resort)
    Not Suitable for Suction cups, suction tape
big-grips-lift-74.jpg

Big Grips Lift iPad 7th-8th Gen. 10.2, Air 3 10.5, Pro 10.5 #74

  • Screen opening: 9-7/16" x 6-7/16", 239 mm x 164 mm
  • Outside dimensions (including handle): 11-11/16" x 9-15/16" x 1-9/16", 297 mm x 254 mm x 39 mm   
  • Comes in several colors
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
tirin-338.jpg

BMOUO/Ledniceker w/ Removable Screen Protector iPad 7th-8th Gen 10.2 #338

This case is sold under several different brand names. To order a keyguard for this case, choose the matching Ledniceker case #338 above.

  • Screen opening: 8-9/16" x 6-3/8", 218 mm x 163 mm
  • Outside dimensions (with handle): 10-11/16" x 9-3/8" x 1", 272 mm x 237 mm x 25 mm
  • Removable front bezel with built-in screen protector
  • Comes in a variety of colors 
  • EVA material
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change (weak)
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
ltrop-37b.jpg

BMOUO/LTROP Football Case w/ Removable Screen Protector iPad 7th-8th Gen 10.2 #37B

This case is sold under a variety of brand names.  It's easy to spot because of the distinctive openings on the upper corners where a shoulder strap (not included) could be attached, and the large football embossed on the back.   Not to be confused with the similar case #338 above.  Note that Amazon has a picture of this case, but when you buy it, it's really the #338.

You'll find this case on our "To Fit Case" list as the LTROP Football Case #37B.

  • Screen opening: 8-9/16" x 6-3/8", 218 mm x 163 mm
  • Outside dimensions (with handle): 10-11/16" x 9-1/2" x 1-3/16"", 272 mm x 241 mm x 31 mm
  • Removable front bezel with built-in screen protector
  • Football embossed on the back
  • Impact-resistant EVA material
  • Comes in a variety of colors 
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change (weak)
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
bmouo-145b.jpg

BMOUO/Ledniceker/LTROP Rotating Handle Stand iPad 7th-8th-9th Gen 10.2 #145B

This case is sold under several different brand names.  You'll find it on our Fit to Case list as the Ledniceker/BMOUO/LTROP Rotating Handle Stand #145B.

  • Screen opening: 8-5/16" x 6-1/4", 211 mm x 158 mm
  • Outside dimensions (without rotating stand): 10-3/4" x 7-3/4" x 1", 274 mm x 197 mm x 25 mm
  • Silicone skin over two-piece plastic shell
  • Shoulder strap
  • Limited room makes for weak keyguards
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
bmouo-179b.jpg

BMOUO Rotating Square Handle Stand w/ Removable Screen Protector iPad 7th-8th-9th Gen 10.2 #179B

This case is sold under several different brand names.  You'll find it on our Fit to Case list as the BMOUO Rotating Square Handle Stand #179B.

  • Screen opening: 8-3/8" x 6-1/4", 212 mm x 160 mm
  • Outside dimensions (without rotating stand): 10-13/16" x 7-5/8" x 7/8", 274 mm x 197 mm x 22 mm
  • Tough EVA foam case
  • Removable screen protector in plastic frame
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
bolete-kids-shock-proof.png

Bolete Kids Shock Proof

The Bolete Kids Shock Proof is a variant of the classic EVA folding handle stand.

To order a keyguard for the Bolete Kids Shock Proof, choose the matching  Classic EVA case below.

braecn-347.jpg

BRAECN Rotating Handle Stand iPad 7th-8th-9th Gen 10.2 #347

This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap.  

When ordering a keyguard to fit the BRAECN case or any of the other branded versions of this case, choose the BRAECN case #347 on the "To Fit Case" list.

  • Screen opening: 8-1/4" x 6-3/16", 209 mm x 158 mm
  • Outside dimensions (without rotating stand): 10-1/8" x 7-1/2" x 7/8", 258 mm x 191 mm x 21 mm
  • Nice silicone skin over the flimsiest two-piece breakable plastic shell imaginable
  • Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
  • Off-center folding stand makes it easy to tip over
  • Conveniently comes apart if you drop it for easy access to the iPad
  • Kids can take it apart with one hand. No kidding.
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
edge3-374.jpg

Brenthaven Edge 360 iPad 7th-8th Gen #374

  • Screen opening: 9-3/8" x 6-5/16", 238 mm x 161 mm
  • Outside dimensions: 10-3/4" x 7-3/4" x 13/16", 274 mm x 197 mm x 21 mm
  • Really thin shell 
  • Flimsy plastic screen bezel stays on better than cheap competitors
  • Folding stand
  • Comes in three colors
Best Attachment

Snap-in 

Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
brenthaven-folio-106b.jpg

Brenthaven Edge Folio III iPad 7th-8th-9th Gen 10.2 #106B

NOT the Folio II case!

  • Screen opening: 9-9/16" x 6-9/16", 243 mm x 167 mm
  • Outside dimensions (case closed, not including feet): 10-1/2" x 7-1/2" x 11/16", 267 mm x 191 mm x 17 mm
  • Folio cover doubles as a stand
  • Hard plastic shell with fabric textured top panel
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Suction tape, straps (last resort)
Not Suitable for Suction cups
buddibox-eva-series.png

BuddiBox EVA Series

The BuddiBox EVA Series is a variant of the classic EVA folding handle stand.

To order a keyguard for the BuddiBox EVA Series, choose the matching  Classic EVA case below.

bump-armor-114b.jpg

Bump Armor Foam-Carry iPad 7th-8th-9th Gen 10.2 #114B

Bump Armor's variation on the classic folding handle case. The is not the same as the Classic EVA case shown below.

  • Screen opening: 9-1/2" x 6-7/16", 240 mm x 163 mm
  • Outside dimensions (with handle): 10-1/2" x 10-15/16" x 1-1/8", 266 mm x 277 mm x 29 mm
  • Folding handle becomes stand
  • Apple pencil holder
  • Comes in several colors   
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
casebus-435.jpg

Casebus Classic Cute Case iPad 7th-8th-9th Gen 10.2 #435

Casebus's variation on the classic folding handle case. The is not the same as the Classic EVA case shown below.

  • Screen opening: 9-7/16" x 6-7/16", 239 mm x 163 mm
  • Outside dimensions (with handle): 10-3/4" x 11-1/16" x 15/16", 273 mm x 282 mm x 24 mm
  • Folding handle becomes stand
  • Apple pencil holder in back of handle (reversible)
  • Holes in handle for optional shoulder strap
  • Comes in several colors   
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
cellular-352.png

Cellular360 Shockproof Rotating Handle Stand iPad 7th-8th Gen 10.2 #352

  • Screen opening: 8-9/16" x 6-7/16", 217 mm x 164 mm
  • Outside dimensions (without rotating stand): 10-5/16" x 7-5/16" x 11/16", 261 mm x 186 mm x 17 mm
  • Stiff elastic skin over rigid frame
  • Rotating handle stand
  • Optional shoulder strap
  • Available in many colors
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets 
seymac-346.jpg

CLARKCAS/SEYMAC Three Layer Rotating Handle Stand iPad 7th-8th Gen 10.2 #346

This case is sold under several different brand names. To order a keyguard for this case, specify the SEYMAC case #346 as your case.

armorbox-kido-77.jpg

Classic EVA iPad 7th-8th-9th Gen 10.2/Air 3 10.5/Pro 10.5 #77A

This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

This model fits both the 7th Generation iPad 10.2" and the Air 3 10.5/Pro 10.5", but there are two variations of it.  Check the measurements to see if you have #77A or #77B.

  • Screen opening: 9-1/2" x 6-9/16", 242 mm x 167 mm
  • Outside dimensions (with handle): 10-13/16" x 10-11/16" x 7/8", 275 mm x 272 mm x 22 mm
  • Folding handle becomes stand
  • Comes in several colors   
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, elastic straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
armorbox-kido-77.jpg

Classic EVA iPad 7th-8th-9th Gen 10.2/Air 3 10.5/Pro 10.5 #77B

This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

This model fits both the 7th Generation iPad 10.2" and the Air 3 10.5/Pro 10.5", but there are two variations of it.  Check the measurements to see if you have #77A or #77B.

  • Screen opening: 9-3/8" x 6-1/2", 238 mm x 165 mm
  • Outside dimensions (with handle): 10-7/8" x 11" x 15/16", 276 mm x 280 mm x 24 mm
  • Folding handle becomes stand
  • Comes in several colors   
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, elastic straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
cooper-dynamo.jpg

Cooper Dynamo

The Cooper Dynamo is a variant of the classic EVA folding handle stand.

To order a keyguard for the Cooper Dynamo, choose the matching Classic EVA case above.t

miesh-383.jpg

CTA/ARMOR-X Rotating Handle Stand iPad 7th-8th Gen. 10.2 #383

This case is sold under a variety of brand names.  To order a keyguard for this case, choose the  ARMOR-X case #383 above.

  • Screen opening: 8-1/2" x 6-3/8", 217 mm x 163mm
  • Outside dimensions: 10-5/16" x 7-5/16" x 5/8", 262 mm x 186 mm x 17 mm
  • Kickstand is in the center for equal balance
Best Attachment Snap-In or lock-in for permanent mounting, 
Possible Attachment Straps (last resort), Velcro for quick change (Not very strong)
Not Suitable for Suction cups, suction tape, magnets
noth-107b.jpg

CWNOTHBY Rotating Handle Stand for iPad 7th-8th Gen 10.2 #107B

  • Screen opening: 8-1/4" x 6-3/16", 209 mm x 158 mm
  • Outside dimensions: 10-5/16" x 7-5/16" x 13/16", 262 mm x 186 mm x 21 mm
  • Rotating handle stand
  • Pencil holder on back
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
dteck-343.jpg

Dteck Kids Case Tri-Layer iPad 7th/8h Gen 10.2 #343

  • Screen opening: 8-1/4" x 6-1/4", 209 mm x 158 mm
  • Outside dimensions (without rotating stand): 10-3/16" x 7-5/16" x 13/16", 259 mm x 185 mm x 21 mm
  • Flimsy silicone skin over rigid plastic frame
  • Rotating handle stand
  • Shoulder strap
  • Available in many colors
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
etopxizu-tablet-case.png

eTopxizu Tablet Case

The eTopxizu Tablet Case is a variant of the classic EVA folding handle stand.

To order a keyguard for the eTopxizu Tablet Case, choose the matching Classic EVA case above.

edge-316.jpg

EDGE Bounce iPad 7th-8th Gen 10.2 #316

  • Screen opening: 9-3/8" x 6-3/8", 238 mm x 161 mm
  • Outside dimensions (with handle stand): 11-1/8" x 10-15/16" x 1", 283 mm x 277 mm x 25 mm
  • Folding handle becomes stand 
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
fintie-371b.jpg

Fintie Folio Case iPad 7th-8th Gen 10.2 #371B

  • Screen opening: 8-9/16" x 6-7/16", 218 mm x 163 mm
  • Outside dimensions: 9-7/8" x 6-7/8" x 9/16", 251 mm x 175 mm x 14 mm
  • Folding cover becomes stand 
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
fintie-kiddie.jpg

Fintie Kiddie (not Kiddie Light)

The Fintie Kidde, also called the Fintie Casebot Kiddie, is a variant of the classic EVA folding handle stand.  Do not confuse it with the Fintie Kiddie Light, or the Fintie Casebot Kiddie Light.

To order a keyguard for the Fintie Kiddie, choose the matching Classic EVA case above.

mighty-375.jpg

Fintie Mighty Shield iPad 7th-8th-9th Gen 10.2 #375

  • Screen opening: 9-7/16" x 6-1/2", 240 mm x 164 mm
  • Outer dimensions: 10-5/8" x 7-3/4" x 15/16", 269 mm x 197 mm x 24 mm
  • Flexible EVA foam
  • Rotating ring stand
Best Attachment

Snap-in 

Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets 
fintiet-368.jpg

Fintie Tuatara iPad Air 2 #368

  • Screen opening: 8-5/16" x 6-3/16", 210 mm x 158 mm
  • Outside dimensions: 10-1/4" x 7-1/4" x 9/16", 261 mm x 184 mm x 14 mm
  • Has a built in rotating handle stand.
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
gonow-301.png

GoNow iPad 7th/8h Gen 10.2/Air 3 10.5/Pro 10.5 #301

Rigid case screws together so iPad cannot be removed by the user.  Acoustic chambers amplify the sound of the speakers.

  • Screen opening: 8-7/16" x 6-5/16", 213 mm x 160 mm
  • Outside dimensions (with handle): 12-11/16" x 9", 323 mm x 228 mm
  • Integrated handle
  • Four speaker openings
  • Two folding feet
  • Optional case, cover stand, shoulder strap, and screen protector
Best Attachment Snap-In or lock-In for semi-permanent installation, magnetic for easy remove/install
Possible Attachment Velcro (good), straps (last resort)
Not Suitable for Suction cups, suction tape
survivor-354.jpg

Griffin Survivor All-Terrain iPad 7th-8th Gen 10.2 #354

  • Screen opening: 8-3/8" x 6-5/16", 213 mm x 160 mm
  • Outside dimensions (with stand): 10-9/16" x 8-1/8" x 3/4", 278 mm x 206 mm x 18 mm
  • Flexible skin over rigid frame
  • Weird folding stand clips on to both sides of the case
  • Stylus/pen holder
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
gumdrop-318.jpg

Gumdrop Foam Tech iPad 7th-8th Gen 10.2 #318

  • Screen opening: 9-7/16" x 6-7/16", 239 mm x 163 mm
  • Outside dimensions (with handle): 10-15/16" x 11" x 15/16", 279 mm x 279 mm x 24 mm
  • Foam case with folding handle stand 
  • Available in a variety of colors
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
gumdroph-382.jpg

Gumdrop Hideaway iPad 7th-8th-9th Gen 10.2 #382

  • Screen opening: 9-3/8" x 6-3/8", 237 mm x 162 mm
  • Outside dimensions: 10-3/8" x 7-3/8" x 3/4", 264 mm x 188 mm x 19 mm
  • Silicone skin over ABS shell 
  • Attached folding handle stand
  • Available in a variety of colors
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
hde-315.jpg

HDE Dual Layer w/ Screen Protector iPad 7th-8th-9th Gen 1.2. #315

Sometimes called Dual Layer Shockproof Case or Kids Shockproof Bumper or Hard Cover Handle Stand.

  • Screen opening: 8-3/8" x 6-1/4", 212 mm x 159 mm
  • Outside dimensions (with handle): 11" x 10-3/4" x 7/8", 279 mm x 273 mm x 23 mm
  • EVA foam case with polycarbonate frame  
  • Camera and ambient light sensor openings may vary by iPad model
  • Some versions have handle drilled for possible shoulder-strap attachment, some versions do not
  • Comes in a variety of colors, including two-tone
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change (weak)
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
hde-shock-proof.jpg

HDE Shock Proof

The HDE Shock Proof, also called the HDE Kids Case, is a variant of the classic EVA folding handle stand. Do not confuse it with the HDE Shockproof Case with a built-in screen protector.

To order a keyguard for the HDE Shock Proof, choose the matching Classic EVA case above.

seymac-346.jpg

Herize/SEYMAC Three Layer Rotating Handle Stand iPad 7th-8th Gen 10.2 #346

This case is sold under several different brand names. To order a keyguard for this case, specify the  SEYMAC case #346 as your case.

hx-175.jpg

HXCASEAC Rotating Handle Stand iPad 7th-8th Gen 10.2 #175

Don't confuse this case with the other similar cases from HXCASEAC.  This one is called the Fashion Defense Case on the packaging, though it's not marketed under that name on Amazon or anywhere else.  There's another HXCASEAC case that seems nearly identical, but it's not.  That one has the strap attachments centered on the back of the case.  This one has the hexagonal strap anchors in three corners.

Also don't confuse it with cases from SEYMAC and others that are strikingly similar.  Check the dimensions below to be sure you have this one.

  • Screen opening: 8-1/4" x 6-1/4", 210 mm x 158 mm
  • Outside dimensions: 10-9/16" x 7-11/16" x 7/8", 269 mm x 195 mm x 22 mm
  • Removable front bezel with built-in screen protector
  • Rotating handle/stand on back
  • Thin shoulder strap
  • Stylus/pen holder
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape 
i-blason-424.jpgg

i-Blason Ares iPad 7th-8th Gen 10.2 #424

  • Screen opening: 9-1/4" x 6-3/8", 236 mm x 161 mm
  • Outside dimensions (without pencil holder): 10-3/8" x 7-3/8" x 11/16", 264 mm x 188 mm x 18 mm
  • Stiff TPU elastic skin over thin polycarbonate shell
  • Built-in screen protector
  • Attached folding stand
  • Available in several colors
  • Affordable
Best Attachment Snap-In or lock-in for permanent mounting, Velcro (weak) for quick change
Possible Attachment Elastic straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
axtion-bold-69.jpg

Joy Factory aXtion Bold iPad 7th-8th Gen 10.2. #364

This is a very expensive case whose only unique feature is a security cable that attaches with double-sided tape. If you want people to not bother stealing your iPad because it looks like it's secured to the table, this might be the case for you.

  • Screen opening: 8-5/16" x 6-1/4", 211 mm x 159 mm
  • Outside dimensions (measured near the corners):  10-11/16" x 7-5/8" x 7/8", 271 mm x 194 mm x 22 mm  
  • 360° rotating handle with small, flimsy stand
  • Built-in screen protector
  • High-quality silicone skin is difficult to seat over thin, flimsy frame
  • Security cable taped to back of iPad is apparent theft deterrent
  • Slotted corners for attaching shoulder strap (not included)
Best Attachment Snap-In or Lock-in for permanent mounting
Possible Attachment Elastic straps (last resort)
Not Suitable for Velcro, magnets, suction cups, suction tape
axtion-pro-mpa.jpg

Joy Factory aXtion Pro MPA for iPad 7th-8th-9th Gen. 10.2 #402 

Not to be confused with the aXtion Bold or the aXtion Extreme.  This one is marketed as the Pro MPA, but the box is labeled "Pro MP", and the installation guide calls it the "pro MP/MPA".  

  • Screen opening: 8-7/16" x 6-3/8", 214 mm x 163 mm
  • Outside dimensions (without rotating handle): 11-1/2" x 8-1/4" x 1", 293 mm x 210 mm x 25 mm   
  • 2-piece clamshell screws together
  • Rotating handle/folding stand
  • Claims to be waterproof
  • Antimicrobial "benefits"
  • Very heavy
  • Comes in white or black
Best Attachment Snap-In or lock-in for permanent mounting (no longer waterproof), Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
kayscase-kidbox.png

Kay's Case KidBox

The Kay's Case KidBox is a variant of the classic EVA folding handle stand.

To order a keyguard for the Kay's Case KidBox, choose the matching Classic EVA case above.

tirin-338.jpg

Ledniceker/TIRIN/BUOMO/SUPLIK case w/ Removable Screen Protector iPad 7th-8th Gen 10.2 #338

This case is sold under a variety of brand names. It's easy to spot because of arched handle with two notches on it and no shoulder strap holes. Not to be confused with the similar case #37B below.

  • Screen opening: 8-9/16" x 6-3/8", 218 mm x 163 mm
  • Outside dimensions (with handle): 10-11/16" x 9-3/8" x 1", 272 mm x 237 mm x 25 mm
  • Removable front bezel with built-in screen protector
  • 2 folding stands on back corners
  • Comes in a variety of colors 
  • EVA material
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change (weak)
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
tirin-205b.jpg

Ledniceker/LTROP/TIRIN/SUPLIK Robot Case iPad 7th-8th-9th Gen 10.2 #366

There are similar-looking cases that should not be confused for the Ledniceker Kids Case, sometimes called the Shock Proof Smart Handle Stand.  This case has a banana-shaped opening under the top handle and cat's eye-shaped openings under the right and left handles.  Some versions have cutouts in the top and bottom left corners for the ambient light sensors on certain models of the iPad 10.2.

  • Screen opening: 9-7/16" x 6-1/2", 240 mm x 165 mm
  • Outside dimensions (including handles and kick stand):  13-13/16" x 9-13/16" x 13/16", 350 mm x 249 mm x 21 mm
  • Headphone-wearing robot on back
  • Robot's legs fold out to become a stand
  • Comes with thin shoulder strap
Best Attachment Snap-in for permanent mounting 
Possible Attachment Suction cups, suction tape, elastic straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
bmouo-145b.jpg

Ledniceker/BMOUO/LTROP Rotating Handle Stand iPad 7th-8th-9th Gen 10.2 #145B

This case is sold under several different brand names.  You'll find it on our Fit to Case list as the Ledniceker Rotating Handle Stand #145B.

  • Screen opening: 8-5/16" x 6-1/4", 211 mm x 158 mm
  • Outside dimensions (without rotating stand): 10-3/4" x 7-3/4" x 1", 274 mm x 197 mm x 25 mm
  • Silicone skin over two-piece plastic shell
  • Shoulder strap
  • Limited room makes for weak keyguards
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
ltrop-37b.jpg

LTROP/BMOUO Football Case w/ Removable Screen Protector iPad 7th-8th Gen 10.2 #37B

This case is sold under a variety of brand names.  It's easy to spot because of the distinctive openings on the upper corners where a shoulder strap (not included) could be attached, and the large football embossed on the back.   Not to be confused with the similar case #338 above.

  • Screen opening: 8-9/16" x 6-3/8", 218 mm x 163 mm
  • Outside dimensions (with handle): 10-11/16" x 9-1/2" x 1-3/16"", 272 mm x 241 mm x 31 mm
  • Removable front bezel with built-in screen protector
  • Football embossed on the back
  • 2 folding stands on back corners
  • Impact-resistant EVA material
  • Comes in a variety of colors 
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change (weak)
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
ltrop-430.jpg

LTROP "Iron Man" Case iPad 7th-8th-9th Gen 10.2 #430

This case is sold under several different brand names, including AVAWO, MENZO, SUPLIK, SUPNICE and TIRIN.  To order a keyguard to fit this case under any of those brands, choose the LTROP case #430 from our "To Fit Case" list.

There are similar-looking cases that should not be confused for the "Iron Man" case.  This is not the  Robot Case listed below.  This case has a similar banana-shaped opening under the top handle and straighter openings under the right and left handles.  It has a figure on the back that looks more like Iron Man than a robot.

  • Screen opening: 9-7/16" x 6-1/2", 240 mm x 165 mm
  • Outside dimensions (including handles and kick stand):  13-1/2" x 9-1/2" x 1-1/8", 344 mm x 242 mm x 29 mm
  • "Iron Man" shaped figure on the back
  • Legs fold out to become a stand
  • Shoulder strap
Best Attachment Snap-in for permanent mounting 
Possible Attachment Suction cups, suction tape, elastic straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
ltrop-65b.jpg

LTROP Kickstand 7th-8th Gen 10.2 #65B

Not to be confused with the LTROP Rotating Handle Stand below.

  • Screen opening: 8-9/16" x 6-1/2", 218 mm x 164 mm
  • Outside dimensions: 10-3/8" x 7-3/8" x 11/16", 263 mm x 187 mm x 18 mm
  • Built-in screen protector
  • Regular folding back stand
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Straps (last resort) , Velcro 
Not Suitable for Suction cups, suction tape, magnets
ltrop-145b.jpg

LTROP/BMOUO Rotating Handle Stand iPad 7th-8th-9th Gen 10.2 #145B

Not to be confused with the LTROP Kickstand above.  This case is sold under several different brand names.  You'll find it on our Fit to Case list as the  Ledniceker/BMOUO/LTROP Rotating Handle Stand #145B.

  • Screen opening: 8-5/16" x 6-1/4", 211 mm x 158 mm
  • Outside dimensions (without rotating stand): 10-3/4" x 7-3/4" x 1", 274 mm x 197 mm x 25 mm
  • Silicone skin over two-piece plastic shell
  • Shoulder strap
  • Limited room makes for weak keyguards
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
tirin-205b.jpg

LTROP/Ledniceker Robot Case iPad 7th-8th Gen 10.2 #366

There are similar-looking cases that should not be confused for the LTROP Kids Case, sometimes called the Shock Proof Smart Handle Stand.  This case has a banana-shaped opening under the top handle and cat's eye-shaped openings under the right and left handles.  Some versions have cutouts in the top and bottom left corners for the ambient light sensors on certain models of the iPad 10.2.

Don't specify this brand name when ordering a keyguard. Specify it as the Ledniceker case #366.

  • Screen opening: 9-7/16" x 6-1/2", 240 mm x 165 mm
  • Outside dimensions (including handles and kick stand):  13-13/16" x 9-13/16" x 13/16", 350 mm x 249 mm x 21 mm
  • Headphone-wearing robot on back
  • Robot's legs fold out to become a stand
  • Comes with thin shoulder strap
Best Attachment Snap-in or lock-in for permanent mounting 
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
max-362.jpg

MAXCases Shield Extreme-X for iPad 7th-8th Gen 10.2 #362

  • Screen opening: 8-1/4" x 6-3/16", 209 mm x 158 mm
  • Outside dimensions: 10-1/2" x 7-1/2" x 11/16", 266 mm x 190 mm x 17 mm
  • Built-in screen protector
  • Attached folding stand
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
ltrop-430.jpg

MENZO/LTROP "Iron Man" Case iPad Air/Air 2/Pro 9.7/5th-6th Gen 10.2 #430

This case is sold under several different brand names.  To order a keyguard to fit this case under any of those brands, choose the  LTROP case #430 from our "To Fit Case" list.

miesh-383.jpg

Miesherk/ARMOR-X Rotating Handle Stand iPad 7th-8th Gen. 10.2 #383

This case is sold under a variety of brand names.  To order a keyguard for this case, choose the ARMOR-X case #383 above.  Not to be confused with the similar case #393 below.

  • Screen opening: 8-1/2" x 6-3/8", 217 mm x 163mm
  • Outside dimensions (without rotating handle): 10-5/16" x 7-5/16" x 5/8", 262 mm x 186 mm x 17 mm
  • Rotating handle/stand
  • Optional shoulder strap
  • Screen bezel has flat shelf with steep angle at ends
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Velcro for quick change (Not very strong), straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
miesherk-393.jpg

Miesherk Rotating Handle Stand iPad 9th Gen. 10.2 #393

Not to be confused with the similar  case #383 above.  This one is specifically made for the iPad 9th Generation.

  • Screen opening: 8-1/2" x 6-3/8", 217 mm x 163mm
  • Outside dimensions (without rotating handle): 10-5/16" x 7-5/16" x 5/8", 263 mm x 186 mm x 17 mm
  • Rotating handle/stand
  • Comes with shoulder strap
  • Screen bezel has a slight slant at the two ends
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment

Velcro for quick change, straps (last resort)

Not Suitable for Suction cups, suction tape, magnets
mobiledemand-25.jpg

MobileDemand xCase iPad 7th/8th/9th Gen 10.2 #25

This case has a hard exterior shell with a soft silicone liner to encase the iPad.

  • Screen opening: 9-7/16" x 6-7/16", 241 mm x 164 mm
  • Outside dimensions (including corner bumpers): 10-9/16" x 7-5/8" x 1", 258 mm x 181 mm x 25 mm
  • Carrying handle 
  • Elastic hand strap on back
  • Multiple options for mounting to a stand or mechanical arm
Best Attachment Snap-in or lock-in for permanent mounting 
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
moko-388.jpg

Moko/ARMOR-X Waterproof iPad 7th-8th Gen 10.2 #388

This case is sold under a variety of brand names. To order a keyguard for this case, choose the ARMOR-X case #388 above.

  • Screen opening: 8-5/8" x 6-1/2", 218 mm x 165 mm
  • Outside dimensions: 10-7/16" x 7-7/16" x 9/16", 265 mm x 189 mm x 14 mm
Best Attachment Snap-in or lock-in for permanent mounting (no longer waterproof), Velcro for quick change           
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Magnets
monoprice-kidz-cover.jpg

Monoprice Kidz Cover

The Monoprice Kidz Cover is a variant of the classic EVA folding handle stand.

To order a keyguard for the Monoprice Kidz Cover, choose the matching  Classic EVA case above.

newstyle-shockproof.png

NEWSTYLE Shockproof Light Weight

NEWSTYLE Shockproof Light Weight is a variant of the classic EVA folding handle stand.

To order a keyguard for the NEWSTYLE Shockproof Light Weight, choose the matching  Classic EVA case above.

nocase10.2-0.jpg

No Case For iPad 7th-8th Gen 10.2 #0

When you order a keyguard for an iPad that is not in a case, choose "No Case" from the list of cases

Best Attachment Velcro for quick change, suction cups, suction tape
Possible Attachment Straps (last resort)
Not Suitable for Magnets, snap-In or lock-in 
nutkase-133b.jpg

NutKase NK 360° iPad 7th-8th-9th Gen 10.2 #133B

  • Screen opening: 8-1/4" x 6-3/16", 209 mm x 158 mm
  • Outside dimensions (without rotating stand): 10-1/4" x 7-1/4" x 5/8", 260 mm x 185 mm x 16 mm
  • Silicone skin over two-piece plastic shell
  • Rotating handle/stand
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape     
braecn-347.jpg

NutKase NK Orbita/BRAECN Rotating Handle Stand iPad 7th-8th Gen 10.2 #347

This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap.

Don't specify this brand name when ordering a keyguard.  Specify it as the  BRAECN case #347.

otterbox-326.png

Otterbox Defender iPad 7th-8th Gen 10.2 #326

  • Screen opening:  9-3/8" x 6-3/8", 238 mm x 162 mm
  • Outside dimensions (without stand): 10-5/16" x 7-5/16" x 11/16", 262 mm x 185 mm x 17 mm
  • Funky clip-on back piece removes to become a huge folding stand
  • Elastic skin over 2-part polycarbonate frame
  • Screen protector built in
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change - Note that the Velcro attaches to the screen protector, not the case.  The Velcro will partially block some openings on the keyguard.
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
trusty-392.jpg

Otterbox EasyGrab/Trusty iPad 7th-8th-9th Gen 10.2 #392

A fine case, but gives us limited options for mounting a keyguard

  • Screen opening:  9-3/8" x 6-3/8", 238 mm x 162 mm
  • Outside dimensions (without stand): 10-3/8" x 7-5/16" x 7/8", 262 mm x 186 mm x 22 mm
  • Weird, elastic stand/hanger
  • Stiff elastic skin over hard plastic frame
Best Attachment Snap-in or lock-in for permanent mounting
Possible Attachment Velcro for quick change (very weak), suction cups (causes partial blockage of some cells), suction tape (if app allows room), elastic straps (last resort)
Not Suitable for Magnets     
otterbox-421.jpg

Otterbox Unlimited iPad 7th-8th-9th Gen 10.2 #421

This is a great case, but unfortunately, it doesn't leave us very good options for mounting a keyguard.

  • Screen opening:  9-3/4" x 6-11/16", 246 mm x 170 mm
  • Outside dimensions (without stand): 10-7/16" x 7-7/16" x 11/16", 266 mm x 190 mm x 17 mm
  • Stiff elastic skin bonded to hard plastic frame
  • Rotating handle/stand
Best Attachment Suction cups or suction tape (partial blockage of some cells)
Possible Attachment Straps (last resort)
Not Suitable for Snap-in, lock-in, Velcro, magnets     
pep-191b.jpg

PEPKOO Ring Handle Stand iPad 7th-8th Generation #191B

  • Screen opening: 8-3/16" x 6-3/16", 208 mm x 156 mm
  • Outside dimensions: 10-7/8" x 8-1/8" x 1-1/16", 276 mm x 207 mm x 27 mm 
  • Removable screen bezel makes for convenient mounting of keyguard
  • Goofy round stand is actually not as tippy as it looks
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Velcro for quick change, straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
poetic-355

Poetic Revolution iPad 7th-8th Gen 10.2 #345

  • Screen opening: 8-3/8" x 6-1/4", 213 mm x 159 mm
  • Outside dimensions: 10-5/16" x 7-1/4" x 5/8", 262 mm x 184 mm x 16 mm
  • Built-in screen protector
  • Regular folding back stand
  • Strong TPU covering a hard polycarbonate case
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
versawrap.jpg

PRC-Saltillo VersaWrap iPad 7th-8th Gen 10.2, iPad Air 4/Air 5 10.9, iPad Pro 11, #431

  • Screen opening: 9-3/8" x 6-1/16", 237 mm x 170 mm
  • Outside dimensions (with handle): 10-7/16" x 9-3/16" x 1", 265 mm x 233 mm x 25 mm
  • Impact-resistant EVA material
  • Folding stand
  • Shoulder strap
  • Optional speaker
  • Pocket for adding an Apple AirTag
  • Comes in a variety of colors 
Best Attachment Snap-in, suction cups, suction tape
Possible Attachment Straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
braecn-347.jpg

ProCase/BRAECN Rotating Handle Stand iPad 7th-8th Gen 10.2 #347

This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap.

Don't specify this brand name when ordering a keyguard.  Specify it as the  BRAECN case #347.

pure-sense-buddy.png

Pure Sense Buddy

Pure Sense Buddy is a variant of the classic EVA folding handle stand. It's different in that it includes a thin shoulder strap and an anti-microbial surface.

To order a keyguard for the Pure Sense Buddy, choose the matching  Classic EVA case above.

ultimate-ii.jpg

RJ Cooper Ultimate II

The Ultimate II is a variant of the classic EVA folding handle stand. RJ Cooper's version adds a shoulder strap and a more sturdy stand.

To order a keyguard for the Ultimate II, choose the matching  Classic EVA case above.

roiskin-442.jpg

ROISKIN Rotating Handle Stand iPad 7th-8th-9th Gen 10.2" #442

  • Screen opening: 8-3/16" x 6-3/16", 209 mm x 157 mm
  • Outside dimensions (without rotating handle): 10-7/16" x 7-7/16" x 7/8", 266 mm x 190 mm x 22 mm
  • Removable front bezel
  • Rotating octagonal handle/stand on back
  • Shoulder strap
  • Apple pen holder
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Elastic straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
roocase-kidarmor.jpg

Roocase KidArmor

The Roocase KidArmor is a variant of the classic EVA folding handle stand. 

To order a keyguard for the Roocase KidArmor, choose the matching  Classic EVA case above.

prolock-387.jpg

Rug-Ed ProLOCK iPad 7th-8th Gen 10.2/Air 3 10.5/Pro 10.5  #387

  • Screen opening: 9-7/16" x  6-9/16", 240 mm x 166 mm
  • Outside dimensions (with handle): 11-3/8" x 7-3/4" x 11/16", 289 mm x 197 mm x 18 mm
Best Attachment Snap-in or lock-in for permanent mounting
Possible Attachment Suction cups (limited room), suction tape, straps (last resort)
Not Suitable for Magnets, Velcro
preventor-391.jpg

Rugged Protection PREVENTOR iPad 7th-8th-9th Gen 10.2 #391

  • Screen opening:  8-1/2" x 6-7/16", 216 mm x 163 mm
  • Outside dimensions: 10-1/4" x 7-1/4" x 11/16", 260 mm x 184 mm x 18 mm
  • 2-piece polycarbonate shell with silicone skin.
  • Built-in screen protector.
  • Folding stand
Best Attachment Snap-in or lock-in for permanent mounting, 
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, Velcro, magnets
seymac-346.jpg

SEYMAC Three Layer Rotating Handle Stand iPad 7th-8th Gen 10.2 #346

This case is sold under several different brand names, including Ambison, CLARKCAS, Herize, and TimeCity, among others.  One thing to note is that the small screen opening can require compromises on the keyguard design.  Items close to the edge of the screen may be hard to reach.

  • Screen opening: 8-5/16" x 6-3/16", 211 mm x 158 mm
  • Outside dimensions (without rotating handle): 10-5/8" x 7-11/16" x 7/8", 269 mm x 195 mm x 22 mm
  • Removable front bezel with built-in screen protector
  • Rotating handle/stand on back
  • Thin shoulder strap
  • Stylus/pen holder
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
shellbox-72b.jpg

ShellBox Waterproof iPad 7th-8th-9th Gen 10.2 #72B

  • Screen opening: 8-5/16" x 6-1/4", 215 mm x 157 mm
  • Outside dimensions (without pencil holder): 10-7/16" x 7-1/2" x 3/4", 267 mm x 190 mm x 18 mm
  • Includes built-in screen protector
  • Comes with ultra-flimsy stick-on folding stand
  • Comes with thin shoulder strap attached by a heavy thread
  • Claims to be waterproof and water resistant??
  • Rear panel attaches two ways so you can easily block the rear camera when you want to take black pictures.
Best Attachment Snap-in or lock-in for permanent mounting (no longer waterproof), 
Possible Attachment Suction cups, suction tape, Velcro, straps (last resort)
Not Suitable for Magnets
speck-422.jpg

Speck Case-E iPad 7th-8th-9th Gen 10.2 #422

There are two versions of this case.  The Case-E has the big mittens that double as a stand or handle.  The Case-E-run has a folding handle that becomes a stand.

  • Screen opening: 9" x 6-1/8", 239 mm x 166 mm
  • Outside dimensions (without handle): 10-11/16" x 7-11/16" x 1-1/8", 271 mm x 196 mm x 26 mm
  • Comes in several colors   
Best Attachment Snap-in, lock-in
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets

duo-363.jpg

STM Dux Plus Duo iPad 7th-8th Gen 10.2 #363

  • Screen opening: 9-3/4" x 6-3/4", 248 mm x 171 mm
  • Outside dimensions (closed with pen holder): 10-5/16" x 7-7/16" x 9/16", 263 mm x 188 mm x 14 mm
  • Hard polyurethane shell with felt-lined cover
  • Folding folio cover doubles as a stand 
  • Pen holder 
Best Attachment
Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, magnets, snap-In
suplik-427.jpg

SUPLIK/Adenk Case w/ Removable Screen Protector iPad 7th-8th-9th Gen 10.2 #427

This case is sold under a variety of brand names.  It's easy to spot because of the distinctive openings on the upper corners where a shoulder strap (not included) could be attached.

  • Screen opening: 8-9/16" x 6-7/16", 218 mm x 163 mm
  • Outside dimensions (with handle): 10-3/4" x 11" x 15/16"", 273 mm x 278 mm x 25 mm
  • Removable front bezel with built-in screen protector
  • Impact-resistant EVA material
  • Comes in a variety of colors 
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change (weak)
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
tirin-205b.jpg

SUPLIK/Ledniceker Robot Case iPad 7th-8th Gen 10.2 #366

There are similar-looking SUPLIK cases that should not be confused for this one.  This case has a banana-shaped opening under the top handle and cat's eye-shaped openings under the right and left handles.  Some versions have cutouts in the top and bottom left corners for the ambient light sensors on certain models of the iPad 10.2.

Don't specify this brand name when ordering a keyguard. Specify it as the Ledniceker case #366.

  • Screen opening: 9-7/16" x 6-1/2", 240 mm x 165 mm
  • Outside dimensions (including handles and kick stand):  13-13/16" x 9-13/16" x 13/16", 350 mm x 249 mm x 21 mm
  • Headphone-wearing robot on back
  • Robot's legs fold out to become a stand
  • Comes with thin shoulder strap
Best Attachment Snap-in or lock-in for permanent mounting 
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
ltrop-430.jpg

SUPLIK/SUPNICE/LTROP "Iron Man" Case iPad Air/Air 2/Pro 9.7/5th-6th Gen 10.2 #430

This case is sold under several different brand names.  To order a keyguard to fit this case under any of those brands, choose the  LTROP case #430 from our "To Fit Case" list.

tirin-338.jpg

SUPLIK/Ledniceker w/ Removable Screen Protector iPad 7th-8th Gen 10.2 #338

This case is sold under several different brand names. To order a keyguard for this case, choose the matching Ledniceker case #338 above.

  • Screen opening: 8-9/16" x 6-3/8", 218 mm x 163 mm
  • Outside dimensions (with handle): 10-11/16" x 9-3/8" x 1", 272 mm x 237 mm x 25 mm
  • Removable front bezel with built-in screen protector
  • Comes in a variety of colors 
  • EVA material
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change (weak)
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
targus-385.jpg

Targus SafePort iPad 7th-8th Gen 10.2 #385

  • Screen opening: 9-9/16" x 6-11/16", 243 mm x 170 mm
  • Outside dimensions: 10-5/8" x 7-5/8" x 5/8", 270 mm x 193 mm x 15 mm
  • Pen holder
  • Folding handle/stand on the back
Best Attachment Suction cups
Possible Attachment Velcro, suction tape, straps (last resort)
Not Suitable for Lock-in, magnets, snap-In
timecity-346.jpg

Timecity/Timeout/SEYMAC Three Layer Rotating Handle Stand iPad 7th-8th Gen 10.2 #346

This case is sold under several different brand names. To order a keyguard for this case, specify the SEYMAC case #346 as your case.

ltrop-430.jpg

TIRIN/LTROP "Iron Man" Case iPad Air/Air 2/Pro 9.7/5th-6th Gen 10.2 #430

This case is sold under several different brand names.  To order a keyguard to fit this case under any of those brands, choose the  LTROP case #430 from our "To Fit Case" list.

tirin-338.jpg

TIRIN/Ledniceker w/ Removable Screen Protector iPad 7th-8th Gen 10.2 #338

This case is sold under several different brand names. To order a keyguard for this case, choose the matching Ledniceker case #338 above.

  • Screen opening: 8-9/16" x 6-3/8", 218 mm x 163 mm
  • Outside dimensions (with handle): 10-11/16" x 9-3/8" x 1", 272 mm x 237 mm x 25 mm
  • Removable front bezel with built-in screen protector
  • Comes in a variety of colors 
  • EVA material
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change (weak)
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
tirin-205b.jpg

TIRIN/Ledniceker Robot Case For Kids 7th-8th Gen 10.2 #366

There are similar-looking cases that should not be confused for the TIRIN Kids Case, sometimes called the Shock Proof Smart Handle Stand.  This case has a banana-shaped opening under the top handle and cat's eye-shaped openings under the right and left handles.  Some versions have cutouts in the top and bottom left corners for the ambient light sensors on certain models of the iPad 10.2.

Don't specify this brand name when ordering a keyguard. Specify it as the Ledniceker case #366.

  • Screen opening: 9-7/16" x 6-1/2", 240 mm x 165 mm
  • Outside dimensions (including handles and kick stand):  13-13/16" x 9-13/16" x 13/16", 350 mm x 249 mm x 21 mm
  • Headphone-wearing robot on back
  • Robot's legs fold out to become a stand
  • Comes with thin shoulder strap
Best Attachment Snap-in or lock-in for permanent mounting 
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
speech-341b.png

Tobii-Dynovox Speech Case w Keyguard Holder iPad 7th-8th Gen 10.2 #341B

  • Screen opening: 8-5/16" x 6-1/4", 212 mm x 159 mm
  • Outside dimensions: 10-3/4" x 7-3/4", 273 mm x 196 mm 
  • Eight-sided rectangular camera opening with elastic button over home key
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets




adocham-317.jpg

TopEsct Steering Wheel iPad 7th-8th Gen. 10.2, Air 3 10.5, Pro 10.5 #317

  • Screen opening: 8-13/16" x 6-5/16", 224 mm x 161 mm
  • Outside dimensions (including handles): 12-5/16" x 8-3/8" x 3/4", 312 mm x 213 mm x 20 mm   
  • Comes in several colors
  • Has a Apple pen holder
  • Made out of silicone
  • Built in stand
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
transy-122b.jpg

Transy Waterproof for iPad 7th-8th Gen 10.2 #122B

  • Screen opening: 8-5/16" x 6-1/4", 212 mm x 159 mm
  • Outside dimensions: 10-7/16" x 7-9/16" x 11/16", 265 mm x 192 mm x 18 mm
  • Built-in screen protector
  • Attachable folding stand and shoulder strap
  • Pencil holder on side of case
Best Attachment Snap-In or lock-in for permanent mounting (no longer waterproof), Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
travellorr-kido.jpg

Travellor Kido

The Travellor Kido is a variant of the classic EVA folding handle stand. 

To order a keyguard for the Travellor Kido, choose the matching  Classic EVA case above.

braecn-347.jpg

TSQ/BRAECN Rotating Handle Stand iPad 7th-8th Gen 10.2 #347

This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap.

Don't specify this brand name when ordering a keyguard.  Specify it as the  BRAECN case #347.

uag-333.jpg

UAG Metropolis iPad 7th-8th Gen 10.2 #333

  • Screen opening: 9-3/4" x 6-3/4", 248 mm x 171 mm
  • Outside dimensions (closed with pen holder): 10-5/16" x 7-7/16" x 9/16", 263 mm x 188 mm x 14 mm
  • Hard polyurethane shell with felt-lined cover
  • Folding folio cover doubles as a stand 
  • Pen holder 
Best Attachment
Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, magnets, snap-In
beetle-335.jpg

Unicorn Beetle Pro iPad 7th-8th Gen 10.2 #335

  • Screen opening: 8-11/16" x 6-7/16", 220 mm x 163 mm
  • Outside dimensions: 10-5/16" x 7-1/4" x 5/8", 262 mm x 184 mm x 17 mm
  • Rounded rectangle camera opening with two rhomboid openings for the ambient light sensors
  • Home key is exposed to the screen opening by a rounded trapezoidal notch
  • Polyurethane skin over polycarbonate shell
  • Built-in screen protector
  • Attached folding stand
  • Easiest rigid case to insert and remove iPad
  • Available in several colors
  • Affordable - the best value among rigid cases
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Elastic straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
uzbl-88b.jpg

UZBL Aftershock for iPad 7th-8th Gen 10.2 #88B

Not to be confused with the ShockWave v1 or v2 cases below which look similar. They are not interchangeable.  Check the measurments to be sure which one you have.

  • Screen opening: 8-11/16" x 6-1/4", 220 mm x 158 mm
  • Outside dimensions: 10-5/8" x 7-1/2" x 11/16", 270 mm x 191 mm x 17 mm
  • Built-in screen protector
  • Attached folding stand
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
uzbl-v1-66.jpg

UZBL ShockWave v1 iPad 7th-8th-9th Gen 10.2 #66

Not to be confused with the ShockWave v2 case below or the Aftershock case above which look similar.  They are not interchangeable.  Check the measurments to be sure which one you have.

  • Screen opening: 8-1/4" x 6-3/16", 210 mm x 158 mm
  • Outside dimensions: 10-9/16" x 7-3/4" x 7/8", 270 mm x 197 mm x 22 mm
  • Elastic skin over rigid frame
  • Removable screen protector frame clips to front
  • Attached folding stand
  • Apple Pencil holder
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
uzbl-shockwave-v2.jpg

UZBL ShockWave v2 iPad 7th-8th-9th Gen 10.2 #64B

Not to be confused with the ShockWave v1 case or the Aftershock case above which look similar.  They are not interchangeable.  Check the measurments to be sure which one you have.

  • Screen opening: 8-11/16" x 6-1/4", 220 mm x 158 mm
  • Outside dimensions: 10-3/8" x 7-3/8" x 11/16", 263 mm x 187 mm x 18 mm
  • Elastic skin stretches over two-piece rigid frame
  • Built-in screen protector
  • Attached folding stand
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
zagg-441.jpg

ZAGG Gear4 Orlando iPad 7th-8th-9th Gen 10.2" #441

  • Screen opening: 9-1/2" x 6-5/8", 242 mm x 168 mm
  • Outside dimensions (without arms): 10-7/8" x 7-7/8" x 1-3/16", 276 mm x 201 mm x 29 mm
  • Tough EVA foam
  • Inner border lining of D3O® for impact resistance
  • Two funky folding arms on back can be used as a carrying handle or a stand.  
  • Arms can be hooked over the back of a car seat for eye-level viewing in the next row.
  • Smirky smile with sunglasses embossed in the back
  • Comes in several colors   
Best Attachment Suction cups, suction tape
Possible Attachment Elastic straps (last resort)
Not Suitable for Snap-in, lock-in, Velcro, magnets
braecn-347.jpg

ZenCase/BRAECN Rotating Handle Stand iPad 7th-8th Gen 10.2 #347

This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap.

Don't specify this brand name when ordering a keyguard.  Specify it as the  BRAECN case #347.

braecn-347.jpg

ZenRich/BRAECN Rotating Handle Stand iPad 7th-8th Gen 10.2 #347

This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap.

Don't specify this brand name when ordering a keyguard.  Specify it as the  BRAECN case #347.