How to Identify a Case for an iPad Air 3 10.5/Pro 10.5

This page covers cases that we support for keyguards to fit the 10.5" iPad Air 3 or iPad Pro 10.5.

If you have an iPad other than an Air 3 10.5 or a Pro 10.5, you're on the wrong page.

For any other iPad, look here.

When you order a keyguard for an iPad Air 3 10.5 or an iPad Pro 10.5, specify the name and number of the case you find here.  You must use the red number to correctly identify a case!  Cases are listed alphabetically, but you can also search the page by the name of an iPad case to find one that is sold under more than one brand name.

If you have an iPad 10.5" case that we don't have depicted here, specify "Other" case when ordering a keyguard and send us a link to the case you have.  We'll charge you a small fee to buy the case, measure it, design a keyguard to fit it, and make and test fit the keyguard.  After that, we'll add it to our list so you can order keyguards to fit it in the future.

aceguarder-337.jpg

ACEGUARDER Antibacterial Kickstand iPad 7th/8th Gen 10.2/Air 10.5/Pro 10.5 #337

There are three versions of this case, identical for keyguard purposes, but with a different kickstand on the back. The Version on the left just has a small kickstand with attachable shoulder strap (not included) on it. The version shown on the bottom has a small rotating kickstand with some adjustability, and locations in the back corners where you can attach a shoulder strap (not included). The version on the right has a wider non-rotating kickstand that is more stable and more adjustable, and it does not have the shoulder strap attachment.

  • Screen opening: 8-7/16" x 6-3/8", 215 mm x 161 mm
  • Outside dimensions: 10-11/16" x 7-11/16" x 11/16", 271 mm x 195 mm x 17 mm 
  • Elastic skin over polycarbonate shell
  • Adjustable stand
  • Comes in several colors
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
adaptive-tech-rugged-rubber.png

Adaptive Tech Solutions Rugged Rubber

The Rugged Rubber case is a variant of the classic EVA folding handle stand. Adaptive Tech Solution's version adds a shoulder strap.

To order a keyguard for the Rugged Rubber, choose the matching  Classic EVA case below.

adocham-317.jpg

Adocham/TopEsct Steering Wheel iPad 7th/8th Gen. 10.2, Air 3 10.5, Pro 10.5 #317

Note:  The opening height is a hair less than the height of the iPad 10.5" screen, so a few pixels get cut off at the top and bottom of the iPad.  It's OK on the 10.2" iPad pictured here.

  • Screen opening: 8-13/16" x 6-5/16", 224 mm x 161 mm
  • Outside dimensions (including handles): 12-5/16" x 8-3/8" x 3/4", 312 mm x 213 mm x 20 mm   
  • Comes in several colors
  • Has a Apple pen holder
  • Made of stretchy silicone
  • Built in stand
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
iadapter-190.jpg

AMDI iAdapter 10 for iPad 7th/8th Gen 10.2/Air 3 10.5/Pro 10.5 #190

  • Screen opening: 8-1/2 " x 6-7/16", 216 mm x 163 mm
  • Outside dimensions: 11 x 8-1/2" x, 280 mm x 216 mm
  • Comes with handle, shoulder strap, and folding stand
  • Built-in amplified speakers
  • Available in black only. Optional colored skins may be added.
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
armorbox-kido-179.png

ArmorBox Kido

The ArmorBox Kido case is a variant of the classic EVA folding handle stand.

To order a keyguard for the ArmorBox Kido, choose the matching  Classic EVA case below.

avawo-kids-case.jpg

Avawo Kids Case

The Avawo Kids Case is a variant of the classic EVA folding handle stand.

To order a keyguard for the Avawo Kids Case, choose the matching  Classic EVA case below.

bambino-377.jpg

Bam Bino Space Suit for iPad 7th-8th-9th Gen 10.2/Air 3 10.5/Pro 10.5  #377

Not to be confused with the Bam Bino case with removable screen protector below. That case has square sides. The Space Suit's sides are rounded inward.

  • Screen opening: 8-9/16" x 6-7/16", 218 mm x 163 mm
  • Outside dimensions (with handle and folded feet): 11-1/16" x 9-5/16" x 1-3/16", 281 mm x 236 mm x 30 mm
  • EVA foam case
  • Distinctive arched handle
  • Two folding plastic stands behind the lower corners
  • Built-in carrying handle
  • Comes in a couple colors
Best Attachment Snap-in or lock-in for permanent mounting 
Possible Attachment Suction cups, suction tape, straps (last resort) Velcro (Not very strong)
Not Suitable for Magnets
tirin-338.jpg

Bam Bino/Ledniceker w/ Removable Screen Protector iPad 7th/8th Gen 10.2 #338

Not to be confused with the Bam Bino Space Suit case above.  This case has square sides.  The Space Suit's sides are rounded inward.

  • Screen opening: 8-9/16" x 6-3/8", 218 mm x 163 mm
  • Outside dimensions (with handle): 10-11/16" x 9-3/8" x 1", 272 mm x 237 mm x 25 mm
  • Removable front bezel with built-in screen protector
  • Comes in a variety of colors 
  • EVA material
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
big-grips-lift-74.jpg

Big Grips Lift iPad 7th-8th-9th Gen. 10.2, Air 3 10.5, Pro 10.5, Air 4/5 10.9,10th Gen. 10.9 and Pro 11 #74

This stiff foam case stretches to fit many different iPad sizes.

  • Screen opening: 9-7/16" x 6-7/16", 239 mm x 164 mm
  • Outside dimensions (including handle): 11-11/16" x 9-15/16" x 1-9/16", 297 mm x 254 mm x 39 mm   
  • Comes in several colors
Best Attachment Snap-In
Possible Attachment Suction cups or suction tape (on 10.2 and 10.5" iPads only), elastic straps (last resort)
Not Suitable for Suction cups or suction tape (on 10.9" and larger iPads), lock-in, Velcro, magnets
bolete-kids-shock-proof.png

Bolete Kids Shock Proof

The Bolete Kids Shock Proof is a variant of the classic EVA folding handle stand.

To order a keyguard for the Bolete Kids Shock Proof, choose the matching  Classic EVA case below.

braecn-heavy-duty-21.jpg

BRAECN Heavy Duty Three Layer Shock Proof w/ Swivel Stand, etc. iPad Air 10.5/Pro 10.5 #21

This case is sold on Amazon under many different names, and even different listings call it different things.  But it's easy to identify this case by the giant "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap.

  • Screen opening: 8-1/2" x 6-3/8", 206 mm x 161 mm
  • Outside dimensions (without rotating handle): 10-3/8" x 7-3/8" x 3/4", 264 mm x 187 mm x 20 mm
  • Nice silicone skin over the flimsiest two-piece breakable plastic shell imaginable
  • Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
  • Off-center folding stand makes it easy to tip over
  • Conveniently comes apart if you drop it for easy access to the iPad
  • Kids can take it apart with one hand. No kidding.
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
brenthaven-322b.png

Brenthaven Edge Folio II iPad Air 3 10.5/Pro 10.5 #322B

  • Screen opening: 9-11/16" x 6-11/16", 246 mm x 170 mm 
  • Outside dimensions (with button): 10-7/16" x 7-5/8" x 1/2", 265 mm x 194 mm x 13 mm
  • Transparent plastic body for barcode inventory
  • Locks iPad in with pushbutton release
  • Corner of folio cover folds back to expose camera
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
buddibox-eva-series.png

BuddiBox EVA Series

The BuddiBox EVA Series is a variant of the classic EVA folding handle stand.

To order a keyguard for the BuddiBox EVA Series, choose the matching  Classic EVA case below.

casebus-470.jpg

Casebus Classic Cute Case iPad Air 3 10.5 #470

Casebus's variation on the classic folding handle case. The is not the same as the Classic EVA case shown below.

  • Screen opening: 9-1/2" x 6-7/16", 240 mm x 164 mm
  • Outside dimensions (with handle): 10-13/16" x 11-1/16" x 15/16", 274 mm x 283 mm x 24 mm
  • Folding handle becomes stand
  • Apple pencil holder in back of handle (reversible)
  • Holes in handle for optional shoulder strap
  • Comes in several colors   
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
catalyst-342.jpg

Catalyst Waterproof iPad Air 3 10.5 #342

This is NOT the version for the iPad Pro 10.5! This is NOT the version with the oval-shaped camera opening on the back!  This is NOT the version with the notch on the top of the screen bezel to make room for the front camera!

  • Screen opening: 9-5/8" x 6-5/8", 244 mm x 168 mm
  • Outside dimensions (without handle): 10-9/16" x 6-5/8" x 9/16", 268 mm x 168 mm x 14 mm
  • Removable stand
  • Round camera opening on the back
  • Comes in black or red
Best Attachment Snap-In (breaks the waterproof seal)
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
armorbox-kido-77.jpg

Classic EVA iPad 7th-8th Gen 10.2/Air 3 10.5/Pro 10.5 #77A

This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

This model fits both the 7th Generation iPad 10.2" and the Air 3 10.5/Pro 10.5", but there are two variations of it.  Check the measurements to see if you have #77A or #77B.

  • Screen opening: 9-1/2" x 6-9/16", 242 mm x 167 mm
  • Outside dimensions (with handle): 10-13/16" x 10-11/16" x 7/8", 275 mm x 272 mm x 22 mm
  • Folding handle becomes stand
  • Comes in several colors   
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
armorbox-kido-77.jpg

Classic EVA iPad 7th-8th Gen 10.2/Air 3 10.5/Pro 10.5 #77B

This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

This model fits both the 7th Generation iPad 10.2" and the Air 3 10.5/Pro 10.5", but there are two variations of it.  Check the measurements to see if you have #77A or #77B.

  • Screen opening: 9-3/8" x 6-1/2", 238 mm x 165 mm
  • Outside dimensions (with handle): 10-7/8" x 11" x 15/16", 276 mm x 280 mm x 24 mm
  • Folding handle becomes stand
  • Comes in several colors   
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
cooper-146.jpg

Cooper Bounce Strap iPad 7th/8th Gen 10.2/Air 3 10.5/Pro 10.5 #146

  • Screen opening: 8-5/8" x 6-3/8", 219 mm x 162 mm
  • Outside opening (including corner bumpers): 11" x 8-1/16" x 13/16", 279 mm x 205 mm x 21 mm
  • Folding handle stand on back
  • Detachable shoulder strap
  • Holes in all 4 corners for attaching strap in any orientation
  • Comes in three colors
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
cooper-dynamo.jpg

Cooper Dynamo

The Cooper Dynamo is a variant of the classic EVA folding handle stand.

To order a keyguard for the Cooper Dynamo, choose the matching Classic EVA case above.

etopxizu-tablet-case.png

eTopxizu Tablet Case

The eTopxizu Tablet Case is a variant of the classic EVA folding handle stand.

To order a keyguard for the eTopxizu Tablet Case, choose the matching Classic EVA case above.

fintie-kiddie.jpg

Fintie Kiddie (not Kiddie Light)

The Fintie Kidde, also called the Fintie Casebot Kiddie, is a variant of the classic EVA folding handle stand.  Do not confuse it with the Fintie Kiddie Light, or the Fintie Casebot Kiddie Light.

To order a keyguard for the Fintie Kiddie, choose the matching Classic EVA case above.

gonow-301.png

GoNow iPad 7th/8th Gen 10.2/Air 3 10.5/Pro 10.5 #301

Rigid case screws together so iPad cannot be removed by the user. Acoustic chambers amplify the sound of the speakers.

  • Screen opening: 8-7/16" x 6-5/16", 213 mm x 160 mm
  • Outside dimensions (with handle): 12-11/16" x 9", 323 mm x 228 mm
  • Integrated handle
  • Four speaker openings
  • Optional case, cover stand, shoulder strap, and screen protector
Best Attachment Snap-In or lock-In for semi-permanent installation, magnetic for easy remove/install
Possible Attachment Velcro (good), straps (last resort)
Not Suitable for Suction cups, suction tape    
griffin-survivor-all-terrain-73.png

Griffin Survivor All-Terrain iPad Pro 10.5 #73

  • Screen opening: 8-7/16" x 6-5/16", 215 mm x 160 mm
  • Outside dimensions (with stand): 10-1/2" x 8-1/8" x 11/16", 266 mm x 206 mm x 18 mm
  • Detachable folding stand clips to both sides of the case
  • Available in different colors
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
gumdrop-droptech-clear-70.jpg

Gumdrop DropTech Clear iPad Pro 10.5 #70

  • Screen opening: 9-1/16" x 6-3/8", 230 mm x 161 mm
  • Outside dimensions: 10-5/16" x 7-5/16" x 9/16", 262 mm x 186 mm x 15 mm
  • Frame has a trapezoidal cutout at the camera end and a rounded cutout at the home key end
  • Silicone skin over ABS shell
  • Available in a variety of colors
Best Attachment

Snap-In or lock-in for permanent mounting

Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
gumdrop-hideaway-71.jpg

Gumdrop Hideaway iPad Air 3 10.5/Pro 10.5 #71

  • Screen opening: 9-1/8" x 6-1/2", 233 mm x 165 mm
  • Outside dimensions: 10-1/4" x 7-5/16" x 11/16", 261 mm x 185 mm x 18 mm
  • Silicone skin over ABS shell 
  • Attached folding handle stand
  • Available in a variety of colors
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
hde-shock-proof.png

HDE Shock Proof

The HDE Shock Proof, also called the HDE Kids Case, is a variant of the classic EVA folding handle stand. Do not confuse it with the HDE Shockproof Case with a built-in screen protector.

To order a keyguard for the HDE Shock Proof, choose the matching Classic EVA case above.

kayscase-kidbox.png

Kay's Case KidBox

The Kay's Case KidBox is a variant of the classic EVA folding handle stand.

To order a keyguard for the Kay's Case KidBox, choose the matching Classic EVA case above.

lifeproof-nuud-62a.png

LifeProof NÜÜD iPad Pro 10.5 #62A

  • Screen opening: 9-1/8" x 6-9/16", 232 mm x 167 mm
  • Outside dimensions: 10-9/16" x 7-9/16" x 9-16", 268 mm x 191 mm x 15 mm
  • Distinctive flattened-arch bulge around home key 
  • Silicone skin over polycarbonate shell 
  • Available in black or white 
  • Claims to be waterproof 
  • Very expensive 
Best Attachment Snap-In or lock-in for permanent mounting (breaks the waterproof seal), Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
mobile-demand-25.jpg

MobileDemand xCase iPad Air 3 10.5/Pro 10.5 #25

  • Screen opening:  9-1/2" x 6-1/2", 242 mm x 165 mm
  • Outside dimensions (with corner bumpers): 10-5/8" x 7-5/8" x 1", 269 mm x 194 mm x 25 mm
  • Durable rubber boot inside hard plastic case with rubber corner bumpers
  • Detachable briefcase handle
  • Back hand strap
  • Optional screen protector
Best Attachment Snap-In or lock-in for permanent mounting 
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
monoprice-kidz-cover.jpg

Monoprice Kidz Cover

The Monoprice Kidz Cover is a variant of the classic EVA folding handle stand.

To order a keyguard for the Monoprice Kidz Cover, choose the matching  Classic EVA case above.

newstyle-shockproof.jpg

NEWSTYLE Shockproof Light Weight

NEWSTYLE Shockproof Light Weight is a variant of the classic EVA folding handle stand.

To order a keyguard for the NEWSTYLE Shockproof Light Weight, choose the matching  Classic EVA case above.

nocase10.5-0.jpg

No Case For iPad Air 10.5/Pro 10.5 #0

When you order a keyguard for an iPad that is not in a case, choose "No Case" from the list of cases

Best Attachment Velcro for quick change, suction cups, suction tape
Possible Attachment Straps (last resort)
Not Suitable for Magnets, snap-In or lock-in 
otterbox-defender-68.png

Otterbox Defender iPad Air 10.5/Pro 10.5 #68

  • Screen opening:  8-9/16" x 6-1/2", 217 mm x 165 mm
  • Outside dimensions (without stand): 10-5/16" x 7-1/4" x 5/8", 263 mm x 185 mm x 15 mm
  • Funky clip-on back piece removes to become a huge folding stand
  • Elastic skin over 2-part polycarbonate frame
  • Trapezoidal camera opening 
  • Home key is exposed to the screen opening by a rounded V-shaped cutout
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets     
poetic-355.jpg

Poetic Revolution iPad Air 3 10.5/Pro 10.5 #355

  • Screen opening: 8-11/16" x 6-7/16", 221 mm x 163 mm
  • Outside dimensions: 10-1/4" x 7-3/16" x 9/16", 261 mm x 182 mm x 15 mm
  • Built-in screen protector
  • Regular folding back stand
  • Strong TPU covering a hard polycarbonate case
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets     
procase-43b.jpg

ProCase Rotating Ring Stand iPad 7th-8th-9th Gen 10.2, iPad Air 3 10.5/Pro 10.5 #43B

Don't confuse this case with the similar rotating handle stand. This one has the hard plastic round ring stand with the finger grip in an offset opening (see the picture).  The other similar cases have symmetrical round rings, rounded square rings, or Velcro hand straps.

  • Screen opening: 9-3/8" x 6-3/8", 238 mm x 162 mm
  • Outside dimensions (without ring stand): 10-5/8" x 7-5/8" x 1-1/4", 269 mm x 194 mm x 31 mm
  • Stiff EVA foam
  • Rotating plastic ring stand
  • Comes in several colors
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Suction cups or suction tape (limited room, best for grids with large openings), Velcro (attaches directly to screen protector), elastic straps (last resort)
Not Suitable for Magnets
prolock-387.jpg

Rug-Ed ProLOCK iPad 7th-8th Gen 10.2/Air 3 10.5/Pro 10.5  #387

  • Screen opening: 9-7/16" x  6-9/16", 240 mm x 166 mm
  • Outside dimensions (with handle): 11-3/8" x 7-3/4" x 11/16", 289 mm x 197 mm x 18 mm
Best Attachment Snap-in or lock-in for permanent mounting     
Possible Attachment Suction cups (limited room), suction tape, elastic straps (last resort)
Not Suitable for Magnets, Velcro
pure-sense-buddy.png

Pure Sense Buddy

Pure Sense Buddy is a variant of the classic EVA folding handle stand. It's different in that it includes a thin shoulder strap and an anti-microbial surface.

To order a keyguard for the Pure Sense Buddy, choose the matching  Classic EVA case above.

ultimate-ii.jpg

RJ Cooper Ultimate II

The Ultimate II is a variant of the classic EVA folding handle stand. RJ Cooper's version adds a shoulder strap and a more sturdy stand.

To order a keyguard for the Ultimate II, choose the matching  Classic EVA case above.

roocase-kidarmor.jpg

Roocase KidArmor

The Roocase KidArmor is a variant of the classic EVA folding handle stand. 

To order a keyguard for the Roocase KidArmor, choose the matching  Classic EVA case above.

seymac-341.jpg

SEYMAC Three Layer Rotating Handle Stand iPad Air 3 10.5/Pro 10.5 #341A

  • Screen opening: 8-1/2" x 6-3/8", 216 mm x 162 mm
  • Outside dimensions (without rotating handle): 10-1/2" x 7-11/16" x 13/16", 266 mm x 195 mm x 21 mm
  • Removable front bezel with built-in screen protector
  • Rotating handle/stand on back
  • Thin shoulder strap
  • Stylus/pen holder
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Elastic straps (last resort)
Not Suitable for Suction cups, suction tape
stm-57.jpg

STM Dux Plus iPad Air 3 10.5/Pro 10.5 #57

  • Screen opening: 9-3/4" x 6-11/16", 247 mm x 171 mm
  • Outside dimensions: 10-3/16" x 7-5/8" x 9/16", 259 mm x 193 mm x 14 mm
  • Fake leather magnetic "smart" folio cover
  • Folio cover doubles as folding stand
  • Holder for stylus or Apple Pencil
Best Attachment
Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, magnets, snap-In
tading-75.jpg

Tading Butterfly Case iPad 7th-8th-9th Gen 10.2" / Air 3 10.5" #75

  • Screen opening: 9-3/8" x 6-5/16", 238 mm x 161 mm
  • Outside dimensions (including wings):  14-1/16" x 10-3/8" x 1-3/8", 355 mm x 259 mm x 38 mm
  • Butterfly wings serve as folding stand
Best Attachment Snap-in for permanent mounting 
Possible Attachment Suction cups, suction tape, elastic straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
tai-market-61.jpg

Tai Market Hybrid Hard Smart Stans Case iPad Pro 10.5 #61

  • Screen opening: 8-11/16" x 6-1/2", 221 mm x 165 mm
  • Outside dimensions: 10-5/16" x 7-5/16" x 5/8", 262 mm x 186 mm x 16 mm
  • Silicone skin over polycarbonate shell
  • Comes with stylus and screen protector
  • Attached folding stand
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets     
adocham-317.jpg

TopEsct Steering Wheel iPad 7th/8th Gen. 10.2, Air 3 10.5, Pro 10.5 #317

  • Screen opening: 8-13/16" x 6-5/16", 224 mm x 161 mm
  • Outside dimensions (including handles): 12-5/16" x 8-3/8" x 3/4", 312 mm x 213 mm x 20 mm   
  • Comes in several colors
  • Has a Apple pen holder
  • Made out of silicone
  • Built in stand
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
travellor-kido.jpg

Travellor Kido

The Travellor Kido is a variant of the classic EVA folding handle stand. 

To order a keyguard for the Travellor Kido, choose the matching  Classic EVA case above.

unicorn-beetle-126.png

Unicorn Beetle Pro iPad Pro 10.5 #126

  • Screen opening: 8-5/8" x 6-7/16", 219 mm x 163 mm
  • Outside dimensions: 10-1/4" x 7-1/4" x 5/8", 261 mm x 184 mm x 15 mm
  • Rounded rectangle camera opening with two rhomboid openings for the ambient light sensors
  • Home key is exposed to the screen opening by a rounded trapezoidal notch
  • Polyurethane skin over polycarbonate shell
  • Built-in screen protector
  • Attached folding stand
  • Easiest rigid case to insert and remove iPad
  • Available in several colors
  • Affordable - the best value among rigid cases
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets     
zenrich3-rotatable.jpg

ZenCase 360° Rotatable Handle Stand

The ZenCase is a variant of the BRAECN Swivel Stand. It costs more and is of equal quality.

To order a keyguard for the ZenCase rotatable case, choose the 

matching  BRAECN Swivel Stand case above.

zenrich3-rotatable.jpg

ZenRich 360° Rotatable Handle Stand

The ZenRich is a variant of the BRAECN Swivel Stand. It costs more and is of equal quality.

To order a keyguard for the ZenRich rotatable case, choose the matching  BRAECN Swivel Stand case above.

zonef-125b.jpg

ZoneFoker Folio Case iPad Air 3 10.5 #125B

This folio case is wrapped in a very thin layer of "composition leather".

  • Screen opening: 8-1/2" x 6-1/2", 216 mm x 165 mm
  • Outside dimensions: 9-13/16" x 7" x 7/16", 249 mm x 178 mm x 11 mm
  • Elastic loop on edge for holding a stylus
  • Cover doubles as a stand with two different viewing angles.
Best Attachment Snap-In
Possible Attachment Straps (last resort)
Not Suitable for Velcro, magnets, suction cups, suction tape