How to Identify a Case for an iPad Air/Air 2/Pro 9.7/5th-6th Generation

This page covers cases that we support for keyguards to fit the iPad Air, Air 2, and 5th-6th Generation.

If you have an iPad other than an iPad Air, Air 2, Pro 9.7, 5th or 6th Generation, you're on the wrong page.

If you have an iPad other than an iPad Air, Air 2, 5th or 6th Generation, you're on the wrong page.

For the iPad Mini, look here.

For the original iPad 2/3/4,  look here.

For the iPad 7th/8th Gen. 10.2, look here.

For the iPad Air 3 10.5/Pro 10.5, look here.

For the iPad Air 4 10.9, look here.

For the iPad Pro 11, look here.

For the iPad Pro 12.9, look here.

For any other iPad, look here.

When you order a keyguard for an iPad Air, Air 2, 5th or 6th Generation, specify the name and number of the case you find here. You must use the red number to correctly identify a case! Cases are listed alphabetically, but you can also search the page by the name of an iPad case to find one that is sold under more than one brand name.

If you have an iPad Air, Air 2, 5th or 6th Generation case that we don't have depicted here, specify "Other" case when ordering a keyguard and send us a link to the case you have. We'll charge you a small fee to buy the case, measure it, design a keyguard to fit it, and make and test fit the keyguard. After that, we'll add it to our list so you can order keyguards to fit it in the future.

ablenet-non-adjustable.png

AbleNet Non-Adjustable Cradle

While not really an iPad case, the AbleNet Non-Adjustable Cradle for the iPad is a variant of the RAM EZ-Roll'r, and we do make keyguards for it.

To order a keyguard for the Non-Adjustable Cradle, choose the matching  RAM EZ-Roll'r case below.

ablenet-127.png

AbleNet/Trident Kraken iPad Air 9.7 #127

  • Screen opening: 8" x 6-3/16", 203 mm x 155 mm
  • Outside dimensions: 9-15/16" x 7-9/16" x 9/16", 252 mm x 193 mm x 15 mm 
  • Hard plastic case
  • Built in rotating handle stand
  • Comes with straps
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
ace-323.jpg

ACEGUARDER Antibacterial iPad Air 2/5th-6th Gen 9.7 #323

  • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
  • Outside dimensions: 10-1/4" x 7-1/2" x 3/4", 261 mm x 190 mm x 19 mm
  • Variety of colors and designs
  • Stand built in, very sturdy for an iPad case 
  • The cover makes it easy to remove and install iPad.
  • Silicone cover over Hard plastic shell. 
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
adaptive-tech-rugged-rubber.png

Adaptive Tech Solutions Rugged Rubber

The Rugged Rubber case is a variant of the classic EVA folding handle stand. Adaptive Tech Solution's version adds a shoulder strap.

To order a keyguard for the Rugged Rubber, choose the matching  Classic EVA case below.

albc-162.png

ALBC Rugged Full Body iPad Air 9.7 #162

  • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
  • Outside dimensions: 10-1/8" x 7-3/8" x 7/8", 258 mm x 187 mm x 23 mm
  • Silicone cover over hard plastic shell.
  • Built in stand
  • Easy to install and remove iPad.
  • No longer on Amazon
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
amdi-iadapter-134.png

AMDI iAdapter 3, 4 and 5/5A for iPad 2/3/4/Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #134

  • Screen opening: 7-13/16" x 5-7/8", 198 mm x 149 mm
  • Outside dimensions (version 5): 11-9/16" x 8-7/16", 294 mm x 215 mm 
  • Comes with handle, shoulder strap, and folding stand
  • Built-in amplified speakers
  • Version 5 available in black only. Some older versions came in beige.  Optional colored skins may be added to newer versions.
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
amdi-iadapter-115.png

AMDI iAdapter 6/6A for iPad 2/3/4/Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #115

  • Screen opening: 7-7/8" x 6", 200 mm x 152 mm
  • Outside dimensions: 11" x 8-1/2", 279 mm x 216 mm
  • Comes with handle, shoulder strap, and folding stand
  • Built-in amplified speakers
  • Available in black only. Optional colored skins may be added.
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
armorbox-kido-179.png

ArmorBox Kido

The ArmorBox Kido case is a variant of the classic EVA folding handle stand.

To order a keyguard for the ArmorBox Kido, choose the matching  Classic EVA case below.

avawo-kids-case.png

Avawo Kids Case

The Avawo Kids Case is a variant of the classic EVA folding handle stand.

To order a keyguard for the Avawo Kids Case, choose the matching  Classic EVA case below.

avawo-327.jpg

Avawo Steering Wheel Case iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #327

This case is a generic silicone case with straps 

  • Screen opening: 8-7/16" x 6-3/16", 214 mm x 157mm
  • Outside dimensions (with handles): 12-3/16" x 8-5/16" x 3/4", 309 mm x 211 mm x 19 mm
  • Soft silicone material
  • Built in kickstand
  • Three handles for multiple ways to hold.
  • Available in blue or pink
  • Comes with straps
Best Attachment Snap-in or lock-in for permanent mounting 
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
ballistic-tough-jacket-128.png

Ballistic Tough Jacket iPad Air/Air 2 #128

  • Screen opening: 9-3/16" x 7", 233 mm x 178 mm
  • Outside dimensions, not including detachable stand or corner bumpers: 9-11/16" x 6-7/8" x 9/16", 246 mm x 175 mm x 15 mm
  • Tough plastic shell with soft elastic insert to hold iPad and protect corners
  • Detachable stand clips around hard shell
  • Discontinued, but came in several colors
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
bam-bino-325.jpg

Bam Bino Hero iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #325

This case comes with a tempered glass screen protector.  It is NOT the case with the removable screen protector.  It is similar to a case sold under the SUPLIK and Ledniceker brands, but of a little lower quality.

  • Screen opening: 9-1/16" x 6-5/16", 231 mm x 161 mm
  • Outside dimensions (with handle and folded feet): 10-1/4" x 9-7/8" x 1-1/4", 260 mm x 244 mm x 31 mm
  • EVA foam case
  • Distinctive arched handle
  • Two folding plastic stands behind the lower corners
  • Built-in carrying handle
  • Comes in several colors
Best Attachment Snap-in or lock-in for permanent mounting 
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
bam-bino-22.jpg

Bam Bino Box Kids Case iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #22

This is certainly a unique case with its kid-friendly elastic shell and adult-ish folding folio cover.

  • Screen opening: 9-1/8" x 6-7/16", 231 mm x 161 mm
  • Outside dimensions (folio cover closed): 10-5/16" x 7-11/16" x 1", 262 mm x 195 mm x 25 mm
  • Tough elastic "box" shell
  • "Faux leather" folding folio cover
  • Funky "faux leather" handle
  • Available in blue or pink
Best Attachment Snap-in or lock-in for permanent mounting 
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
big-grips-frame-114.jpg

Big Grips Frame iPad Air/Air 2/Pro 9.7/5th Gen/6th Gen 9.7 #114

  • Screen opening: 9" x 6-3/16", 229 mm x 157 mm
  • Outside dimensions: 11-3/8" x 8-3/4" x 1-1/2", 286 mm x 222 mm x 38 mm
  • Comes in a couple different colors
  • Lightweight and easy to clean
  • The case is soft and squishy.
Best Attachment Snap-in 
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
big-grips-lift-133.png

Big Grips Lift iPad Air/Air 2/Pro 9.7/5th Gen/6th Gen 9.7 #133

  • Screen opening: 9-1/16" x 6-1/4", 230 mm x 159 mm
  • Outside dimensions (with handle): 11-1/4" x 9-11/16" x 1-9/16", 286 mm x 245 mm x 39 mm
  • Built-in handle
  • Comes in a couple different colors
  • Lightweight and easy to clean
  • The case is soft and squishy.
Best Attachment Snap-in
Possible Attachment Suction cups, suction tape, lock-in, straps (last resort)
Not Suitable for Velcro, magnets
big-grips-slim-123.jpg

Big Grips Slim iPad Air/Air 2/Pro 9.7/5th Gen/6th Gen 9.7 #123

  • Screen openings: 9-1/8" x 6-5/16", 231 mm x 161 mm
  • Outside dimensions: 10-5/16" x 7-9/16" x 13/16", 261 mm x 192 mm x 20 mm
  • Comes in several colors
Best Attachment Snap-in 
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
bmouo-112b.jpg

BMOUO Rotating Handle Stand iPad Air 2/Pro 9.7/9.7 5th-6th Gen 9.7 #112B

  • Screen opening: 7-7/8" x5-15/16", 200 mm x 151 mm
  • Outside dimensions: 10-1/2" x 6-11/16" x 11/16 ", 266 mm x 196 mm x 25 mm
  • The home key is exposed to the screen opening by a trapezoidal cutout
  • Detachable shoulder strap
  • Available in different colors
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
bolete-kids-shock-proof.png

Bolete Kids Shock Proof

The Bolete Kids Shock Proof is a variant of the classic EVA folding handle stand.

To order a keyguard for the Bolete Kids Shock Proof, choose the matching  Classic EVA case below.

braecn-heavy-duty-184.jpg

BRAECN Rotating Handle Stand iPad 5th-6th Gen 9.7. #184

This case is sold on Amazon under many different names, and even different listings call it different things.  But it's easy to identify this case by the giant "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap.

  • Screen opening: 7-7/8" x 5-5/16", 200 mm x 151 mm
  • Outtside dimension (Without rotating stand): 9-3/4" x 7-1/16" x 13/16", 248 mm x 178 mm x 21 mm
  • Nice silicone skin over the flimsiest two-piece breakable plastic shell imaginable
  • Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
  • Off-center folding stand makes it easy to tip over
  • Conveniently comes apart if you drop it for easy access to the iPad
  • Kids can take it apart with one hand. No kidding.
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
brenthaven-351.jpg

Brenthaven Edge 360 iPad 5th-6th Gen 9.7. #351

  • Screen opening: 8-7/8" x 6-1/16", 225 mm x 154 mm
  • Outside dimensions: 10" x 7-1/4" x 9/16", 253 mm x 184 mm x 14 mm
  • Really thin shell 
  • Flimsy plastic screen bezel stays on better than cheap competitors
  • Comes with a stand
  • Comes in three colors
Best Attachment Snap-in 
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
buddibox-eva-series.png

BuddiBox EVA Series

The BuddiBox EVA Series is a variant of the classic EVA folding handle stand.

To order a keyguard for the BuddiBox EVA Series, choose the matching  Classic EVA case below.

caszone-26.png

CASZONE Heavy Duto 360° Rotatable iPad 5th-6th Gen 9.7. #26

  • Screen opening: 8-15/16" x 7-3/16", 252 mm x 182 mm
  • Outside dimensions: 9-15/16" x 7" x 13/16", 252 mm x 178 mm x 20 mm
  • Often imitated by even cheaper knockoffs
  • Really thin shell is tougher than you'd think
  • Nice, thick silicone skin
  • Flimsy plastic screen bezel stays on better than cheap competitors
  • Comes with rotating handle stand and shoulder strap
  • Comes in several colors
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
cellular360-84.png

Cellular360 ShockProof iPad 5th-6th Gen 9.7. #84

Sometimes called Drop Proof, and sometimes called 360° Rotatable Kickstand and Handle

  • Screen opening: 7-7/8" x 5-7/8", 200 mm x 149 mm
  • Outside dimensions (not including rotating handle): 9-15/16" x 7-13/16" x 11/16", 252 mm x 182 mm x 18 mm
  • Clever two-piece polycarbonate shell
  • Nice silicone skin
  • Comes with rotating handle stand
  • Optional shoulder strap
  • Good quality for the money
  • Comes in several colors
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
chatwrap-131.png

ChatWrap/Prio iPad Air 2/Pro 9.7/5th-6th Gen 9.7 #131

  • Screen opening: 9" x 6-1/4", 229 mm x 158 mm
  • Durable rubber boot inside hard polycarbonate shell
  • Padded handle
  • Built-in amplified speaker
  • Comes in several colors
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
armorbox-kido-45-157-159.jpg

Classic EVA iPad Air #159

This case is sold under a huge variety of brand names.  There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

Over the years, the design has been offered in at least 5 variations.  You need to determine which variation you have, or the keyguard will not fit.  The list below shows how to determine if you have this model.

  • Screen opening: 8-3/8" x 5-7/8", 213 mm x 149 mm
  • Outside dimensions (with handle):  10-1/8" x 10-3/16" x 3/4", 257 mm x 258 mm x 19 mm
  • Slotted back for inserting iPad
  • Round extension covering the home key, notch around camera
  • Folding handle becomes stand
  • Comes in several colors

Measure to be sure it's not mistaken for #157 or #45.

Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
armorbox-kido-45-157-159.jpg

Classic EVA iPad Air #157

This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

Over the years, the design has been offered in at least 5 variations. You need to determine which variation you have, or the keyguard will not fit. The list below shows how to determine if you have this model.

  • Screen opening: 8-3/4" x 6", 222 mm x 152 mm
  • Outside dimensions (with handle): 10-3/8" x 10-7/16" x 13/16", 264 mm x 267 mm x 21 mm
  • Slotted back for inserting iPad
  • Round extension covering the home key, notch around camera
  • Folding handle becomes stand
  • Comes in several colors

Measure to be sure it's not mistaken for #159 or #45.

Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
armorbox-kido-45-157-159.jpg

Classic EVA iPad Air/Air 2 #45

This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

Over the years, the design has been offered in at least 5 variations. You need to determine which variation you have, or the keyguard will not fit. The list below shows how to determine if you have this model.

  • Screen opening: 8-13/16" x 6-1/8", 224 mm x 155 mm
  • Outside dimensions (with handle): 10-1/2" x 10-5/8" x 13/6", 266 mm x 267 mm x 21 mm
  • Slotted back for inserting iPad
  • Round extension covering the home key, notch around camera
  • Folding handle becomes stand
  • Comes in several colors

Measure to be sure it's not mistaken for #157 or #159.

Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
armorbox-kido-99-119.jpg

Classic EVA iPad Air 2/5th-6th Gen 9.7/Pro 9.7 #119

This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

Over the years, the design has been offered in at least 5 variations. You need to determine which variation you have, or the keyguard will not fit. The list below shows how to determine if you have this model.

  • Screen opening: 9" x 6-1/4", 229 mm x 159 mm
  • Outside dimension (with handle): 10-3/16" x 10-9/16" x 7/8", 259 mm x 268 mm x 21 mm
  • iPad is inserted from the front - no slot in back
  • Angled notch on one end of opening for access to home key, camera end is straight
  • Folding handle becomes stand
  • Comes in several colors

Measure to be sure it's not mistaken for #99.

Best Attachment

Snap-in or lock-in for permanent mounting

Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
armorbox-kido-99-119.jpg

Classic EVA iPad Air 2/5th-6th Gen 9.7/Pro 9.7 #99

This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

Over the years, the design has been offered in at least 5 variations. You need to determine which variation you have, or the keyguard will not fit. The list below shows how to determine if you have this model.

  • Screen opening: 9-1/8" x 6-1/4", 231 mm x 159 mm
  • Outside dimension (with handle): 10-5/16" x 10-9/16" x 7/8", 262 mm x 269 mm x 22 mm
  • iPad is inserted from the front - no slot in back
  • Angled notch on one end of opening for access to home key, camera end is straight
  • Folding handle becomes stand
  • Comes in several colors

Measure to be sure it's not mistaken for #119.

Best Attachment

Snap-in or lock-in for permanent mounting

Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
compusult-eva2-148.png

Compusult EVA2 iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #148

  • Screen opening: 9-1/4" x 6-3/8", 234 mm x 162 mm
  • Outside openings (with handle): 10-1/2" x 11-7/16" x 15/16", 267 mm x 291 mm x 24 mm
  • Folding handle becomes stand
  • Detachable shoulder strap
  • Available in black, blue, and pink
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
cooper-bounce-strap-130.png

Cooper Bounce Strap iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #130

  • Screen openings: 8-1/4" x 6-1/4", 210 mm x 158 mm
  • Outside dimension (without corner bumpers): 9-3/4" x 7-3/16" x 3/16", 248 mm x 182 mm x 21 mm
  • Made from stretchy silicone
  • Four holes in corners to fit optional shoulder strap
  • Super-flimsy folding stand on back
  • Available in black, blue, pink, and camouflage
Best Attachment

Snap-in or lock-in for permanent mounting

Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
cooper-dynamo.png

Cooper Dynamo

The Cooper Dynamo is a variant of the classic EVA folding handle stand.

To order a keyguard for the Cooper Dynamo, choose the matching Classic EVA case above.

cyber-142.png

Cyberacoustics lC-1930 iPad Air/5th-6th Gen 9.7 #142A

  • Screen opening: 9-3/16" x 6-1/2", 234 mm x 165 mm
  • Outside dimensions: 9-3/4" x 7" x 5/8",  248 mm x 178 mm x 16 mm
  • Rotating handle stand on back
  • Flexible EVA foam
  • Stretch to fit over iPad
  • Interior pocket flap
Best Attachment
Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, magnets, snap-in
etopxizu-tablet-case.png

eTopxizu Tablet Case

The eTopxizu Tablet Case is a variant of the classic EVA folding handle stand.

To order a keyguard for the eTopxizu Tablet Case, choose the matching Classic EVA case above.

folio-102b.png

Fintie Folio Cover iPad Air 9.7 #102B

  • Screen opening: 8" x 6-1/16", 203 mm x 155 mm
  • Outside dimensions: 9-9/16" x 6-11/16" x 5/8 ", 243 mm x 170 mm x 15 mm
  • This version has a trapezoidal camera opening, and the screen opening is a straight line at the camera end
  • The home key is exposed to the screen opening by a rounded V-shaped cutout
  • Detachable folding stand clips to both sides of the case
  • Available in different colors
  • Multiple colors and designs
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
fintie-kiddie.jpg

Fintie Kiddie (not Kiddie Light)

The Fintie Kidde, also called the Fintie Casebot Kiddie, is a variant of the classic EVA folding handle stand.  Do not confuse it with the Fintie Kiddie Light, or the Fintie Casebot Kiddie Light.

To order a keyguard for the Fintie Kiddie, choose the matching Classic EVA case above.

fintie-kiddie-167.jpg

Fintie Kiddie Light iPad Air/Air 2/Pro 9.7 #167

The Fintie Kidde Light is also called the Casebot Kiddie Light. Do not confuse it with the Fintie Kiddie, or the Fintie Casebot Kiddie.

  • Screen opening: 9-1/8" x 6-7/16", 232 mm x 163 mm
  • outside dimensions (without corner bumpers): 9-7/8" x 7-1/4" x ", 251 mm x 185 mm x 22 mm
  • Flexible EVA foam
  • Stretch to fit over iPad
Best Attachment

Snap-in 

Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets 
fintie-mighty-shield-97.jpg

Fintie Kiddie Mighty Shield iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #97

  • Screen opening: 9" x 6-1/4", 229 mm x 159 mm
  • Outside dimensions (measured across the center): 10-3/8" x 7-5/8" x 1-1/8", 265 mm x 193 mm x 28 mm
  • Rotating handle stand on back
  • Flexible EVA foam
  • Stretch to fit over iPad
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets



fintie-82b.jpg

Fintie Tuatara iPad Air 2 #82B

  • Screen opening: 8" x 6-1/16", 203 mm x 154 mm
  • Outside dimensions: 9-13/16" x 7-1/16" x 1/2", 249 mm x 179 mm x 14 mm
  • Has a built in rotating handle stand.
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
gonow-150.png

GoNow iPad Air/Air 2/Pro 9.7/5th Gen/6th Gen 9.7 #150

  • Screen opening: 7-13/16" x 5-7/8", 199 mm x 149 mm
  • Outside dimensions (with handle): 12-11/16" x 9", 323 mm x 228 mm
  • Air/Air 2/Pro 9.7 version has two speaker openings
  • 5th/6th Generation version has four speaker openings
  • Integrated handle
  • Optional case, cover stand, shoulder strap, and screen protector
Best Attachment Snap-In or lock-In for semi-permanent installation, magnetic for easy remove/install
Possible Attachment Velcro (good), straps (last resort)
Not Suitable for Suction cups, suction tape
griffin-survivor-all-terrain-135.png

Griffin Survivor All-Terrain iPad Air #135

  • Screen opening: 7-15/16" x 5-15/16", 201 mm x 150 mm
  • Outside dimensions: 9-15/16" x 7-3/16" x 3/4", 253 mm x 182 mm x 20 mm
  • This version has an oval camera opening, and the screen opening is a straight line across both ends with no additional bulges or cutouts
  • The home key is covered with a small round elastic button 
  • Detachable folding stand
  • Available in different colors
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
griffin-survivor-all-terrain-138.png

Griffin Survivor All-Terrain iPad Air 2 #138

  • Screen opening: 8" x 6", 203 mm x 153 mm
  • Outside dimensions: 10" x 7-3/8" x 3/4", 254 mm x 188 mm x 19 mm
  • This version has an oval camera opening with a little plastic bulge around it that makes it different from most other All-Terrains
  • The home key is exposed to the screen opening by a rounded V-shaped cutout
  • Detachable folding stand clips to only one side of the case
  • Available in different colors
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
griffin-survivor-all-terrain-96.jpg

Griffin Survivor All-Terrain iPad Air 2/Pro 9.7/9.7 5th-6th Gen 9.7 #96

  • Screen opening: 8" x 6-1/16", 203 mm x 154 mm
  • Outside dimensions (with stand): 10-1/16" x 7-3/4" x 5/8 ", 255 mm x 196 mm x 19 mm
  • This version has a trapezoidal camera opening, and the screen opening is a straight line at the camera end
  • The home key is exposed to the screen opening by a rounded V-shaped cutout
  • Detachable folding stand clips to both sides of the case
  • Available in different colors
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
griffin-survivor-extreme-102.png

Griffin Survivor Extreme iPad 9.7 5th/6th Gen 9.7 #102A

  • Screen opening:  7-15/16" x 6-1/16", 202 mm x 154 mm
  • Outside dimensions (with stand): 10-1/8" x 7-3/4" x 5/8", 257 mm x 196 mm x 16 mm
  • This version has a trapezoidal camera opening with a little plastic bulge around it, but the screen opening at the camera end is a straight line
  • The home key is exposed to the screen opening by a rounded V-shaped cutout
  • Detachable folding stand clips to both sides of the case
  • Available in different colors
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
griffin-survivor-slim-83.jpg

Griffin Survivor Slim iPad Air/Air 2 #83A

  • Screen opening: 8" x 5-15/16", 203 mm x 151 mm
  • Outside dimensions: 9-15/16" x 7-1/8" x 11/16", 252 mm x 181 mm x 17 mm
  • Oval camera opening
  • Home key is exposed to the screen opening by a rounded V-shaped cutout
  • Sturdy attached folding stand
  • Available in different colors 
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape

griffin-survivor-slim-81.png Griffin Survivor Slim iPad Air 2/Pro 9.7 #81

  • Screen opening: 8" x 6", 203 mm x 153 mm
  • Outside dimensions: 10-1/16" x 7-1/8" x 9/16", 256 mm x 181 mm x 15 mm
  • Round camera opening
  • Home key is exposed to the screen opening by a rounded V-shaped cutout
  • Sturdy attached folding stand with stylus holder
  • Available in different colors 
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
gripcase-67.png

Gripcase (not Shield) iPad Air #67A

  • Screen opening: 8-7/8" x 6-13/16", 225 mm x 157 mm
  • Outside dimension (with handles): 12-1/4" x 9-5/8" x 15/16", 313 mm x 245 mm x 24 mm
  • Bumpers on all four sides serve as handles
  • Optional detachable stand and shoulder strap
  • No strap holes in corners
  • Available in several colors
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
gripcase-90.jpg

Gripcase iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #90

  • Screen opening: 9" x 6-5/16", 230 mm x 160 mm
  • Outside dimensions (with handles): 12-15/16" x 9-13/16" x 15/16", 328 mm x 249 mm x 25 mm
  • Bumpers on all four sides serve as handles
  • Strap holes in corners to fit optional shoulder strap
  • Available in several colors
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
gripcase-shield-65.png

Gripcase Shield iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #65A

  • Screen openings: 9-1/8" x 6-7/16", 231 mm x 164 mm
  • Outside dimensions: 11-15/16" x 9-1/4" x 13/16", 302 mm x 235 mm x 21 mm 
  • Strap holes in corners to fit optional shoulder strap 
  • Made of tough EVA foam
  • Available in black, blue and red
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
gumdrop-193.png

Gumdrop Bounce Skin iPad Air 9.7 #193

  • Screen opening: 8" x 6-1/16", 204 mm x 155 mm
  • Outside dimensions: 9-11/16" x 7-1/16" x 5/8", 247 mm x 180 mm x 16 mm
  • Frame has a trapezoidal cutout at the camera end and a rounded cutout at the home key end
  • Available in a variety of colors
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
gumdrop-droptech-87.png

Gumdrop DropTech iPad Air #87

  • Screen opening: 7-7/8" x 5-7/8", 200mm x 149 mm
  • Outside dimensions: 9-7/8" x 7-1/16" x 5/8", 250 mm x 180 mm x 16 mm
  • Oval camera opening
  • Home key is covered with small elastic button as part of elastic skin
  • Silicone skin over ABS shell 
  • Available in a variety of colors 
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
gumdrop-droptech-110.jpg

Gumdrop DropTech iPad Air 2/Pro 9.7 #110

  • Screen opening: 8-1/2" x 5-7/8", 216 mm x 150 mm
  • Outside dimensions: 9-13/16" x 7-1/16" x 9/16", 249 mm x 180 mm x 15 mm
  • Frame has a trapezoidal cutout at the camera end and a rounded cutout at the home key end
  • Silicone skin over ABS shell
  • Available in a variety of colors
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable f Velcro, magnets
gumdrop-droptech-clear-116.jpg

Gumdrop DropTech Clear iPad 5th/6th Gen 9.7 #116

  • Screen opening: 8-5/8" x 6-1/4", 219 mm x 159 mm
  • Outside dimensions: 9-13/16" x 7-1/8" x 5/8", 249 mm x 180 mm x 17 mm
  • Frame has a trapezoidal cutout at the camera end and a rounded cutout at the home key end
  • Silicone skin over ABS shell
  • Available in a variety of colors
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
gumdrop-foamtech-151.png

Gumdrop FoamTech iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #151

  • Screen opening: 8-15/16" x 6-3/16", 227 mm x 158 mm
  • Outside dimensions (with handle): 10-1/2" x 10-5/8" x 15/16", 266 mm x 270 mm x 24 mm
  • Outside dimensions (ignoring handle): 10-1/2" x 8-3/4" x 15/16", 266 mm x 223 mm x 23 mm
  • Foam case with folding handle stand
  • Available in a variety of colors
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
gumdrop-hideaway-92.jpg

Gumdrop Hideaway iPad Air #92

  • Screen opening: 7-7/8" x 5-7/8", 200 mm x 150 mm
  • Outside dimensions: 9-13/16" x 7-1/16" x 3/4", 249 mm x 180 mm x 19 mm
  • Silicone skin over ABS shell 
  • Attached folding handle stand
  • Available in a variety of colors
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
gumdrop-hideaway-94.png

Gumdrop Hideaway iPad Air 2/Pro 9.7 #94

  • Screen opening: 8-1/2" x 5-7/8", 271 mm x 150 mm
  • Outside dimensions: 9-13/16" x 7-1/8" x 5/8", 250 mm x 181 mm x 17 mm
  • Silicone skin over ABS shell 
  • Attached folding handle stand
  • Available in a variety of colors
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
gumdrop-hideaway-111.png

Gumdrop Hideaway iPad 5th/6th Gen 9.7 #111

  • Screen opening: 8-5/8" x 6-1/8", 218 mm x 156 mm
  • Outside dimensions: 9-7/8" x 7-1/8" x 3/4", 251 mm x 181 mm x 19 mm
  • Silicone skin over ABS shell 
  • Attached folding handle stand
  • Available in a variety of colors
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
gumdrop-lock-down-89.png

Gumdrop Lock-Down iPad 5th/6th Gen 9.7 #89

  • Screen opening: 8-7/8" x 6-1/16"
  • Outside dimensions (with handle closed): 10-7/16" x 7-15/16" x 11/16", 265 mm x 202 mm x 18 mm
  • Silicone skin over ABS shell 
  • Attached folding handle stand
  • Available in a variety of colors
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Suction tape, suction cups (on grids up to 20 cells), straps (last resort)
Not Suitable for Velcro, magnets
hde-screen-protector-105.png

HDE Dual Layer w/ Removable Screen Protector iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7. #105

Sometimes called Dual Layer Shockproof Case or Kids Shockproof Bumper or Hard Cover Handle Stand.

  • Screen opening: 7-15/16" x 5-15/16", 202 mm x 151 mm
  • Outside dimensions (with handle): 10-3/4" x 10-11/16" x 13/16", 273 mm x 272 mm x 20 mm
  • EVA foam case with polycarbonate frame  
  • Camera and ambient light sensor openings may vary by iPad model
  • Some versions have handle drilled for possible shoulder-strap attachment, some versions do not
  • Comes in a variety of colors, including two-tone
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Suction tape, straps (last resort)
Not Suitable for Magnets, suction cups
hde-shock-proof.png

HDE Shock Proof

The HDE Shock Proof, also called the HDE Kids Case, is a variant of the classic EVA folding handle stand. Do not confuse it with the HDE Shockproof Case with a built-in screen protector.

To order a keyguard for the HDE Shock Proof, choose the matching Classic EVA case above.

hde-folio-cover-106.png

HDE Vintage Folio Cover iPad 5th-6th Gen 9.7 #106

Sometimes called Folding Leather Folio Case.

  • Screen opening: 7-15/16" x 6", 202 mm x 152 mm
  • Outside dimensions (case closed): 9-11/16" x 7-1/8" x 13/16", 247 mm x 181 mm x 21 mm
  • Leather pocket surrounds iPad
  • Outer folio/foding stand is often a different color, including some brightly colored patterns
Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Suction tape, straps (last resort)
Not Suitable for Suction cups
protex-147.jpg

Higher Ground PROTEx Air, 5th-6th Gen 9.7 #147

  • Screen opening: 9-3/16" x 6-7/16", 234 mm x 163 mm
  • Outside dimensions: 9-15/16" x 7-3/16" x 5/8", 254 mm x 183 mm x 15 mm
  • Eight-sided rectangular camera opening with elastic button over home key
  • Polycarbonate shell
Best Attachment
Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, magnets, snap-in    
ho-371.jpg

HoCase iPad 5th-6th Gen 9.7 #371A

  • Screen opening:  7-13/16" x 5-7/8", 198 mm x 149 mm
  • Outside dimensions: 9-7/8" x 7-1/8" x 3/4", 250mm x 180 mm x 19 mm
  • Built-in kickstand
  • Hybrid shock absorbing silicone exterior and inner hard plastic bumper withstand accidental drops and falls.
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
axtion-bold-69.jpg

Joy Factory aXtion Bold iPad 5th-6th Gen 9.7 #69

This is a very expensive case whose only unique feature is a security cable that attaches with double-sided tape. If you want people to not bother stealing your iPad because it looks like it's secured to the table, this might be the case for you. Otherwise, there are many less expensive cases that provide the same or more protection to the iPad.

  • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
  • Outside dimensions (measured near the corners):  10-1/16" x 7-1/4" x 15/16", 255 mm x 184 mm x 23 mm  
  • 360° rotating handle with small, flimsy stand
  • Built-in screen protector
  • High-quality silicone skin is difficult to seat over thin, flimsy frame
  • Security cable taped to back of iPad is apparent theft deterrent
  • Slotted corners for attaching shoulder strap (not included)
Best Attachment Snap-In or Lock-in for permanent mounting
Possible Attachment straps (last resort)
Not Suitable for Velcro, magnets, suction cups, suction tape
kayscase-kidbox.png

Kay's Case KidBox

The Kay's Case KidBox is a variant of the classic EVA folding handle stand.

To order a keyguard for the Kay's Case KidBox, choose the matching 

Classic EVA case above.

blackbelt-67b.jpg

Kensington Black Belt 1st Deg iPad Air 2 9.7 #67B

  • Screen opening: 8-3/8" x 6-1/4", 212 mm x 160 mm
  • Outside dimensions: 9-13/16" x 6-15/16" x 1/2", 249 mm x 177 mm x 12 mm
Best Attachment Nothing attaches a keyguard very securely to this case
Possible Attachment Snap-in, straps (last resort)
Not Suitable for Magnets, Velcro, suction cups, suction tape
kensington-331.png

Kensington Black Belt 2nd Deg iPad 5th-6th Gen 9.7 #331

  • Screen opening: 9-3/8" x 6-9/16", 238 mm x 167 mm
  • Outside dimensions: 9-15/16" x 6-5/8" x 3/4", 252 mm x 167 mm x 19 mm
  • EVA foam case with screen protector in hard plastic frame
  • Built in silicon handle strap
  • Screen protector included
Best Attachment Velcro for quick change, suction cups, suction tape
Possible Attachment Straps (last resort)
Not Suitable for Magnets, snap-in or lock-in 
belt-82a.jpg

Kensington Black Belt 2nd Deg Rugged iPad Air 2 9.7 #82a

  • Screen opening: 8-3/8" x 6-1/4", 213 mm x 159 mm
  • Outside dimensions: 9-15/16" x 7-1/8" x 3/4", 252 mm x 181 mm x 19 mm
  • EVA foam case with screen protector in hard plastic frame
  • Built in silicon handle strap
  • Screen protector included
Best Attachment Snap-In 
Possible Attachment Suction Tape, straps (last resort)
Not Suitable for Velcro, magnets, suction cups
kensington-171b.jpg

Kensington SafeGrip Rugged iPad Air 9.7 #171B

  • Screen opening: 9-1/8" x 6-3/8", 232 mm x 162 mm
  • Outside dimensions (including handle): 10-3/16" x 9-7/8" x 7/8", 259 mm x 250 mm x 22 mm
  • EVA foam case
  • Distinctive arched handle
  • Two folding plastic stands behind the lower corners
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
ken-107.png

Kensington SafeGrip Rugged iPad Air 9.7 #107A

  • Screen opening: 9-1/8" x 6-3/8", 232 mm x 162 mm
  • Outside dimensions (including handle): 10-3/16" x 9-7/8" x 7/8", 259 mm x 250 mm x 22 mm
  • EVA foam case
  • Distinctive arched handle
  • Two folding plastic stands behind the lower corners
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
ledniceker-screen-protector-23.jpg

Ledniceker Kids Case w/ Removable Screen Protector iPad 5th-6th Gen 9.7 #23

There are similar-looking cases branded with different names, but this is the one with the removable screen protector.  This is NOT the one that comes with a tempered-glass screen protector that is permanently attached.

  • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
  • Outside dimensions (including handle and corner stands): 10-3/8" x 9-5/8" x 1-3/8", 263 mm x 245 mm x 35 mm
  • EVA foam case with screen protector in hard plastic frame
  • Distinctive arched handle
  • Two folding plastic stands behind the lower corners
  • Comes in a variety of colors
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
ledniceker-kids-24.jpg

Ledniceker Kids Case iPad Air/Air 2/Pro 9.7/5th-6th Gen #24

There are similar-looking cases branded with different names, but this is the one that has no removable screen protector and no shoulder strap.  Some versions of this case come with a tempered glass screen protector instead of the removable one.

  • Screen opening: 9" x 6-1/4", 230 mm x 160 mm
  • Outside dimensions (including handle and corner stands): 10-1/4" x 9-5/8" x 1-1/4", 261 mm x 245 mm x 33 mm
  • EVA foam case
  • Distinctive arched handle
  • Two folding plastic stands behind the lower corners
  • Comes in a variety of colors
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
tirin-205b.jpg

Ledniceker/LTROP Robot Case iPad 5th/6th Gen 9.7 #76B

There are similar-looking cases that should not be confused for the TIRIN Kids Case, sometimes called the Shock Proof Smart Handle Stand.  This case has a banana-shaped opening under the top handle and cat's eye-shaped openings under the right and left handles.  Some versions have cutouts in the top and bottom left corners for the ambient light sensors on certain models of the iPad 9.7.

  • Screen opening: 9" x 6-1/4", 228 mm x 159 mm
  • Outside dimensions (including handles and kick stand):  13-3/16" x 9-5/8" x 1-1/8", 335 mm x 244 mm x 29 mm
  • Headphone-wearing robot on back
  • Robot's legs fold out to become a stand
  • Comes with thin shoulder strap
Best Attachment Snap-in or lock-in for permanent mounting 
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
lifeproof-fre-183.jpg

LifeProof FRĒ iPad Air #183

  • Screen opening: 9-1/16" x 6-1/8", 231 mm x 156 mm
  • Outside dimensions: 10-1/4" x 7-3/8" x 5/8", 261 mm x 187 mm x 16 mm 
  • Slight rounded notch in screen opening around home key (difficult to see in this picture.  Right-click, then choose "Open image in new tab" to see it.)
  • Silicone skin over polycarbonate shell
  • Available in black or white
  • Claims to be waterproof 
  • Very expensive
Best Attachment Snap-in or lock-in for permanent mounting (breaks the waterproof seal), Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
lifeproof-nuud-109.jpg

LifeProof NÜÜD iPad Air #109A

  • Screen opening: 8-13/16" x 6-1/4", 225 mm x 159 mm
  • Outside dimensions: 10-5/16" x 7-3/8" x 9/16", 261 mm x 187 mm x 15 mm
  • Distinctive arched bulge around home key
  • Silicone skin over polycarbonate shell 
  • Available in black or white 
  • Claims to be waterproof 
  • Very expensive 
Best Attachment Snap-In or lock-in for permanent mounting (breaks the waterproof seal), Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
lifeproof-nuud-95.jpg

LifeProof NÜÜD iPad Air 2 #95

  • Screen opening: 8-7/8" x 6-3/8", 226 mm x 162 mm
  • Outside dimensions: 10-1/16" x 7-1/4" x 9/16", 255 mm x 184 mm x 15 mm
  • Distinctive arched bulge around home key.  The top of the arch is slightly flattened, unlike the Air case #95 whose arch is fully rounded.
  • Silicone skin over polycarbonate shell 
  • Available in black or white 
  • Claims to be waterproof 
  • Very expensive 
Best Attachment Snap-in or lock-in for permanent mounting (breaks the waterproof seal), Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
lifeproof-nuud-88.png

LifeProof NÜÜD iPad Pro 9.7 (not 9.7 5th/6th Gen) #88A

  • Screen opening: 8-3/4" x 6-1/8", 223 mm x 156 mm
  • Outside dimensions: 9-1/2" x 6-3/4" x 9/16", 242 mm x 172 mm x 14 mm
  • Distinctive flattened-arch bulge around home key
  • Silicone skin over polycarbonate shell 
  • Available in black or white 
  • Claims to be waterproof 
  • Very expensive 
Best Attachment Snap-in or lock-in for permanent mounting (breaks the waterproof seal), Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
luck-164.jpg

Little Luck Folio iPad Air 9.7 #164

  • Screen opening: 8-1/16" x 6-3/8", 205 mm x 161 mm
  • Outside dimensions: 10-3/4" x 7-3/8" x 1/2", 273 mm x 187 mm x 12 mm
  • Distinctive arched bulge around home key
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
logitech-132.png

Logitech Rugged Combo 2 iPad 5th-6th Gen 9.7 #132

  • Screen opening: 9-1/4" x 6-3/8", 234 mm x 161 mm
  • Outside dimensions: 10-3/4" x 7-3/8" x 9/16", 273 mm x 187 mm x 14 mm
  • Distinctive arched bulge around home key
  • Silicone skin over polycarbonate shell 
  • Available in black or white 
  • Claims to be waterproof 
  • Very expensive 
Best Attachment Snap-In
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
maxc-185b.jpg

MAXCases EXTREME Shield for iPad 5th-6th Gen 9.7 #185B

  • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
  • Outside dimensions: 9-15/16" x 7-3/16" x 3/4", 253 mm x 182 mm x 20 mm
  • Built-in screen protector
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
max-372.png

MAXCases Shield for iPad 5th-6th Gen 9.7 #372

  • Screen opening: 7-3/4" x 5-13/16/16", 198 mm x 148 mm
  • Outside dimensions: 10-1/16" x 7-11/16" x 3/4", 275 mm x 194 mm x 18 mm
  • Built-in screen protector
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
mobile-142b.jpg

Mobile Demand X Case iPad 5th-6th Gen 9.7 #142B

  • Screen opening: 9-1/16" x 6-1/4", 230 mm x 159 mm
  • Outside dimensions: 9-11/16" x 6-15/16" x 1-1/16", 247 mm x 176 mm x 27 mm
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Suction Cups, suction tape, straps (last resort)
Not Suitable for Magnets, Velcro
monoprice-kidz-cover.jpg

Monoprice Kidz Cover

The Monoprice Kidz Cover is a variant of the classic EVA folding handle stand.

To order a keyguard for the Monoprice Kidz Cover, choose the matching  Classic EVA case above.

mumba-112.jpg

Mumba Kido 2 iPad 5th-6th Gen 9.7 #112A

  • Screen opening: 9-1/4" x 6-1/2", 235 mm x 165 mm
  • Outside dimensions: 10-1/4" x 7-3/4" x 5/8", 260 mm x 197 mm x 15 mm
  • Distinctive arched bulge around home key
  • Silicone skin over polycarbonate shell 
  • Available in black or white 
  • Claims to be waterproof 
  • Very expensive 
Best Attachment Suction cups
Possible Attachment Snap-in, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
newstyle-shockproof.png

NEWSTYLE Shockproof Light Weight

NEWSTYLE Shockproof Light Weight is a variant of the classic EVA folding handle stand.

To order a keyguard for the NEWSTYLE Shockproof Light Weight, choose the matching  Classic EVA case above.

nocase9.7-0.jpg

No Case for iPad 5th-6th Gen 9.7 #0

When you order a keyguard for an iPad that is not in a case, choose "No Case" from the list of cases

Best Attachment Velcro for quick change, suction cups, suction tape
Possible Attachment Straps (last resort)
Not Suitable for Magnets, snap-in or lock-in 
noxm-182.jpg

Noxm Rotating Handle iPad 5th-6th Gen 9.7 #182

  • Screen opening: 7-7/8" x 5-15/16", 200 mm x 150 mm
  • Outside dimensions: 9-7/8" x 7-1/8" x 3/4", 251 mm x 181 mm x 20 mm
  • Distinctive arched bulge around home key
  • Silicone skin over polycarbonate shell 
  • Available in black or white 
  • Claims to be waterproof  
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
nut-188b.jpg

NutKase Rugged iPad 5th-6th Gen 9.7. #188B

  • Screen opening: 8-7/8" x 6-1/16", 225 mm x 154 mm
  • Outside dimensions: 10-1/4" x 6-1/16" x 5/8", 261 mm x 154 mm x 15 mm
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Suction tape, straps (last resort)
Not Suitable for Magnets, suction cups
otterbox-defender-139.png

Otterbox Defender iPad Air/Air 2/Pro 9.7 #139

Don't confuse this with case #321 below. The screen openings are nearly identical in size and the only way to tell them apart is by the shape of the home button and camera openings.

  • Screen opening:  7-15/16" x 6", 202 mm x 153 mm
  • Outside dimensions: 9-13/16" x 7-1/16" x 5/8", 250 mm x 180 mm x 16 mm
  • Funky clip-on back piece removes to become a huge folding stand
  • Elastic skin over 2-part polycarbonate frame
  • Camera opening is trapezoidal, taller and narrower than case #321 below
  • Home key is covered by an extension of the elastic outer skin
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets     
otterbox-321.jpg

Otterbox Defender iPad 5th-6th Gen 9.7 #321

Don't confuse this with case #139 above. The screen openings are nearly identical in size and the only way to tell them apart is by the shape of the home button and camera openings.

  • Screen opening:  7-15/16" x 6", 202 mm x 152 mm
  • Outside dimensions (without stand): 9-13/16" x 7-1/16" x 5/8", 250 mm x 180 mm x 17 mm
  • Funky clip-on back piece removes to become a huge folding stand
  • Elastic skin over 2-part polycarbonate frame
  • Camera opening is trapezoidal, shorter and wider than case #139 above
  • Home key is exposed to the screen opening by a rounded V-shaped cutout
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
otterbox-universe-161.png

Otterbox Universe iPad Air 2/Pro 9.7 #161

  • Screen opening:  9-1/4" x 6-1/2", 236 mm x 166 mm
  • Outside dimensions: 9-3/4" x 6-15/16" x 9/16", 247 mm x 177 mm x 14 mm
  • Polycarbonate shell with hard flexible rim to hold iPad. Rim is open at the home key end.
Best Attachment
Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, magnets, snap-in
otterbox-348.jpg

Otterbox Unlimited iPad 5th-6th Gen 9.7 #348

  • Screen opening:  8-7/8" x 6-1/8", 226 mm x 155 mm
  • Outside dimensions: 9-13/16" x 7" x 9/16", 249 mm x 179 mm x 14 mm
  • Polycarbonate shell with hard flexible rim to hold iPad. Rim is open at the home key end.
Best Attachment Snap-In or Lock-in for permanent mounting
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
pep-373.jpg

Pepko Also Fetenn iPad 5th-6th Gen 9.7 #373

  • Screen opening: 7-13/16" x 5-9/16", 198 mm x 149 mm
  • Outside dimensions: 9-15/16" x 7-3/16" x 11/16", 253 mm x 183 mm x 18 mm
  • Nice silicone skin over really cheap two-piece shell
  • Comes apart at the drop of the hat. A 3-year-old could do it!
  • Will safely hold an iPad until you drop it
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
pixiu-117.jpg

PIXIU Rugged Defender iPad 5th-6th Gen 9.7 #117

  • Screen opening:  7-13/16" x 5-7/8", 198 mm x 150 mm
  • Outside dimensions: 9-15/16" x 7-1/8" x 13/16", 252 mm x 181 mm x 20 mm
  • Polycarbonate shell with hard flexible rim to hold iPad. Rim is open at the home key end.
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets    
procase-153b.jpg

ProCase Kids Case iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #153B

  • Screen opening: 9" x 6-1/4", 229 mm x 159 mm
  • Outside dimensions (including handle and kick stand): 10-13/16" x 9-3/16" x 15/16", 275 mm x 233 mm x 24 mm
Best Attachment Snap-in for permanent mounting 
Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
procase-353.jpg

ProCase Ultra Slim iPad 5th-6th Gen 9.7 #353

  • Screen opening:  9-7/16" x 6-5/8", 240 mm x 169 mm
  • Outside dimensions: 9-1/2" x 6-3/4" x 1/2", 241 mm x 172 mm x 13 mm
  • Polycarbonate shell with hard flexible rim to hold iPad. Rim is open at the home key end.
  • Comes in a variety of colors
Best Attachment
Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, magnets, snap-in
pure-sense-buddy.png

Pure Sense Buddy

Pure Sense Buddy is a variant of the classic EVA folding handle stand. It's different in that it includes a thin shoulder strap and an anti-microbial surface.

To order a keyguard for the Pure Sense Buddy, choose the matching  Classic EVA case above.

ram-ez-rollr.png

RAM EZ-Roll'r iPad Air/Air 2/Pro 9.7/5th-6th Gen 9.7 #122

While not really an iPad case, we do make keyguards for iPads mounted in the EZ Roll'r.  The EZ-Roll'r clips to the two corners on one end of the iPad and to the center of the opposite end.  The EZ-Roll'r attaches to the standard RAM Mount hardware like suction cups, ball-and-socket joints, and flexible arms.

Best Attachment
Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, magnets, snap-in
rantice-332b-copy.jpg

Rantice Hybrid Kickstand iPad 5th-6th Gen 9.7 #332B

  • Screen opening:  7-7/8" x 5-15/16", 200 mm x 151 mm
  • Outside dimensions: 9-15/16" x 7-1/16" x 3/4", 253 mm x 180 mm x 19 mm
  • Polycarbonate shell with hard flexible rim to hold iPad. Rim is open at the home key end.
  • Comes in a variety of colors
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
ultimate-ii.jpg

RJ Cooper Ultimate II

The Ultimate II is a variant of the classic EVA folding handle stand. RJ Cooper's version adds a shoulder strap and a more sturdy stand.

To order a keyguard for the Ultimate II, choose the matching  Classic EVA case above.

roocase-kidarmor.jpg

Roocase KidArmor

The Roocase KidArmor is a variant of the classic EVA folding handle stand. 

To order a keyguard for the Roocase KidArmor, choose the matching  Classic EVA case above.

rugged-103a.png

RUG-ED ProLock iPad Air/5th-6th Gen 9.7 #103A

  • Screen opening: 9" x  6-3/16", 228 mm x 157 mm
  • Outside dimensions (with handle): 11-3/16" x 7-3/4" x 11/16", 284 mm x 197 mm x 18 mm
Best Attachment Snap-in or lock-in for permanent mounting, 
Possible Attachment Suction cups, suction tape, Velcro, straps (last resort)
Not Suitable for Magnets
rugged-163.jpg

Rugged Protection Preventor 5 iPad 5th-6th Gen 9.7 #163

  • Screen opening:  7-7/8" x 6", 201 mm x 152 mm
  • Outside dimensions: 9-13/16" x 7" x 11/16", 249 mm x 178 mm x 17 mm
  • Polycarbonate shell with hard flexible rim to hold iPad. Rim is open at the home key end.
  • Comes in a variety of colors
Best Attachment Snap-in or lock-in for permanent mounting, 
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, Velcro, magnets
seymac-124.jpg

SEYMAC 3-Layer Smart Cover iPad 5th-6th Gen 9.7 #124

  • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
  • Outside dimensions (without smart cover): 9-7/8" x 7-3/8" x 11/16", 251 mm x 187 mm x 17 mm
  • Flexible tough polyurethane skin over tough polyurethane hard shell
  • Polyurethane leather folding magnetic "smart cover"
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
seymac-stock-143b.png

SEYMAC Stock iPad 5th-6th Gen 9.7 #143B

SEYMAC makes several different cases with similar appearance and similar names. This is not the one with the rotating handle stand on the back, nor is it the one with the magnetic "smart cover". This is the one with folding stand on the back and the flimsy plastic bezel that barely clips on to the front.

  • Screen opening: 7-7/8" x 6", 200 mm x 152 mm
  • Outside dimensions: 10-1/8" x 7-3/8" x 3/4", 257 mm x 188 mm x 19 mm
  • Nice silicone skin over really cheap two-piece shell
  • Extremely thin shoulder strap
  • Back is semi-transparent with a folding non-adjustable stand in the middle - stand does not rotate
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
seymac-356.jpg

SEYMAC Rotating Handle Stand iPad 5th-6th Gen 9.7 #356

SEYMAC makes several different cases with similar appearance and similar names. This is not the one with only a stand on the back, nor is it the one with the magnetic "smart cover". This is the one with the rotating handle stand.

  • Screen opening: 7-7/8" x 5-15/16", 200 mm x 152 mm
  • Outside dimensions: 10-1/8" x 7-5/16" x 13/16", 258 mm x 187 mm x 21 mm
  • Nice silicone skin over thin two-piece shell
  • Thin shoulder strap
  • Rotating handle-stand
  • Easiest rigid case to insert and remove iPad
  • Affordable - the best value among rigid cases
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
shellbox-363.jpg

ShellBox iPad 5th-6th Gen 9.7 #149B

  • Screen opening: 9-1/16" x 6-5/16", 231 mm x 161 mm
  • Outside dimensions: 9-15/16" x 7-3/16" x 5/8", 253 mm x 182 mm x 16 mm
  • Includes built-in screen protector
  • Comes with ultra-flimsy stick-on folding stand
  • Comes with thin shoulder strap attached by a heavy thread
  • Claims to be waterproof and water resistant??
  • Rear panel attaches two ways so you can easily block the rear camera when you want to take black pictures.
Best Attachment Snap-in or lock-in for permanent mounting, 
Possible Attachment Suction cups, suction tape, Velcro, straps (last resort)
Not Suitable for magnets
speck-37.png

Speck iGuy iPad Air 9.7 #37

  • Screen opening: 9-1/8" x 6-3/8", 232 mm x 162 mm
  • Outside dimensions (with handles and stand): 14-7/16" x 8-11/16" x 15/16", 363 mm x 220 mm x 24 mm
  • Eight-sided rectangular camera opening with elastic button over home key
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
  • Easiest rigid case to insert and remove iPad
  • Affordable - the best value among rigid cases
Best Attachment

Snap-in or lock-in for permanent mounting

Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
stm-187.jpg

STM DUX iPad 5th-6th Gen 9.7 #187

  • Screen opening: 9-1/4" x 6-7/16", 236 mm x 164 mm
  • Outside dimensions: 9-11/16" x 7" x 9/16", 245 mm x 177 mm x 15 mm
  • Eight-sided rectangular camera opening with elastic button over home key
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
  • Easiest rigid case to insert and remove iPad
  • Affordable - the best value among rigid cases
Best Attachment None are really great with this case
Possible Attachment Snap-in, suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
ledniceker-screen-protector-23.jpg

SUPLIK Case for Kids with Built-In Screen Protector

This case is sold under a variety of names. It is the same as the Ledniceker Kids Case with the built-in removable screen protector.

To order a keyguard for the SUPLIK case with the removable screen protector, choose the matching Ledniceker Kids Case with Built-In Screen Protector above.

ledniceker-kids-24.jpg

SUPLIK Shockproof Handle Bumper Stand

This case is sold under a variety of names. It is the same as the Ledniceker Kids Case. This is NOT the one with the built-in removable screen protector.

To order a keyguard for the SUPLIK Bumper Stand, choose the matching Ledniceker Kids Case above.

sxtech-118.png

SxTech/SEYMAC Rotating Handle Stand iPad 5th-6th Gen 9.7 #356

This case is sold under a variety of brand names.  You will not find it on our "Fit to Case" list.  To order a keyguard to fit this case, specify the  SEYMAC case #356, instead.

  • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
  • Outside dimensions: 10-1/8" x 7-5/16" x 13/16", 258 mm x 186 mm x 21 mm
  • Eight-sided rectangular camera opening with elastic button over home key
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
  • Easiest rigid case to insert and remove iPad
  • Affordable - the best value among rigid cases
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
tab-177.jpg

TabPow Rugged Triple Layer 9.7 #177

  • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
  • Outside dimensions: 9-15/16" x 7-1/8" x 5/8", 251 mm x 181 mm x 16 mm
  • Eight-sided rectangular camera opening with elastic button over home key
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
  • Easiest rigid case to insert and remove iPad
  • Affordable - the best value among rigid cases
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets



tech-113.jpg

Tech21 EVO Play iPad Air/Air 2 9.7 #113

  • Screen opening: 9-1/8" x 6-3/8", 232 mm x 161 mm
  • Outside dimensions (with handle): 10-5/16" x 7-1/2" x 1", 262 mm x 190 mm x 25 mm
  • Built-in handle
  • The case is soft and squishy.
Best Attachment

Snap-in

Possible Attachment Suction cups, suction tape, lock-in, straps (last resort)
Not Suitable for Velcro, magnets
temdan-344.jpg

Temdan Waterproof iPad 5th-6th Gen 9.7 #344

  • Screen opening: 9-3/16" x 6-7/16", 234 mm x 163 mm
  • Outside dimensions: 9-15/16" x 7-1/8" x 9/16", 252 mm x 181 mm x 15 mm
  • Eight-sided rectangular camera opening with elastic button over home key
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
  • Easiest rigid case to insert and remove iPad
  • Affordable - the best value among rigid cases
Best Attachment Snap-in or lock-in for permanent mounting (breaks the waterproof seal)      
Possible Attachment Suction cups, suction tape, Velcro, straps (last resort)
Not Suitable for magnets
sxtech-118.png

TimeCity/SEYMAC Rotating Handle Stand iPad 5th-6th Gen 9.7 #356

This case is sold under a variety of brand names.  You will not find it on our "Fit to Case" list.  To order a keyguard to fit this case, specify the  SEYMAC case #356, instead.

  • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
  • Outside dimensions: 10-1/8" x 7-5/16" x 13/16", 258 mm x 186 mm x 21 mm
  • Eight-sided rectangular camera opening with elastic button over home key
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
  • Easiest rigid case to insert and remove iPad
  • Affordable - the best value among rigid cases
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
tirin-328.jpg

TIRIN Kids Case iPad 5th-6th Gen 9.7 #328

  • Screen opening: 8-15/16" x 6-1/4", 227 mm x 160 mm
  • Outside dimensions (with handles): 12-15/16" x 9-9/16" x 15/16", 329 mm x 245 mm x 24 mm
  • Eight-sided rectangular camera opening with elastic button over home key
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
  • Easiest rigid case to insert and remove iPad
  • Affordable - the best value among rigid cases
Best Attachment

Snap-in or lock-in for permanent mounting

Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
tobii-46.png

Tobii-Dynovox Speech Case w Keyguard Holder iPad 5th-6th Gen 9.7 #46

  • Screen opening: 8" x 6-1/8", 203 mm x 156 mm
  • Outside dimensions: 10" x 7-3/16", 251 mm x 182 mm 
  • Eight-sided rectangular camera opening with elastic button over home key
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
  • Easiest rigid case to insert and remove iPad
  • Affordable - the best value among rigid cases
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
topesct-86.jpg

TopEsct Silicone Handle Stand iPad Air 9.7 #86

  • Screen opening: 8-3/8" x 6-1/8", 213 mm x 156 mm
  • Outside dimensions (with handles): 12" x 8-1/4" x 11/16", 304 mm x 210 mm x 18 mm
  • Eight-sided rectangular camera opening with elastic button over home key
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
  • Easiest rigid case to insert and remove iPad
  • Available in several colors
  • Affordable - the best value among rigid cases
Best Attachment

Snap-in or lock-in for permanent mounting

Possible Attachment Suction cups, suction tape, straps (last resort)
Not Suitable for Velcro, magnets
topsky-336.jpg

TOPSKY/BENTOBEN iPad Air/Air 2 9.7 #336

  • Screen opening: 7-7/8" x 5-15/16", 200 mm x 151 mm
  • Outside dimensions: 9-15/16" x 7-1/8" x 11/16", 252 mm x 181 mm x 18 mm
  • Eight-sided rectangular camera opening with elastic button over home key
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
  • Easiest rigid case to insert and remove iPad
  • Available in several colors
  • Affordable - the best value among rigid cases
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
travellor-kido.jpg

Travellor Kido

The Travellor Kido is a variant of the classic EVA folding handle stand. 

To order a keyguard for the Travellor Kido, choose the matching  Classic EVA case above.

trident-104.jpg

Trident Aegis iPad Air 9.7 #104

  • Screen opening: 8-3/8" x 6", 213 mm x 152 mm
  • Outside dimensions: 9-3/4" x 7" x 9/16", 248 mm x 178 mm x 15 mm
  • Eight-sided rectangular camera opening with elastic button over home key
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
  • Easiest rigid case to insert and remove iPad
  • Available in several colors
  • Affordable - the best value among rigid cases
Best Attachment Snap-in or lock-in for permanent mounting
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, Velcro, magnets
trident-195.jpg

Trident Kraken AMS Handle iPad Air 2/5th-6th Gen 9.7 #195

  • Screen opening: 7-15/16" x 6-1/16", 201 mm x 154 mm
  • Outside dimensions (with handle): 10" x 9-7/16" x 9/16", 255 mm x 239 mm x 15 mm
  • Eight-sided rectangular camera opening with elastic button over home key
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
  • Easiest rigid case to insert and remove iPad
  • Available in several colors
  • Affordable - the best value among rigid cases
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
ablenet-127.png

Trident Kracken iPad Air 9.7 #127

  • Screen opening: 8" x 6-3/16", 203 mm x 155 mm
  • Outside dimensions: 9-15/16" x 7-9/16" x 9/16", 252 mm x 193 mm x 15 mm 
  • Hard plastic case
  • Built in rotating handle stand
  • Comes with straps
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
braecn-heavy-duty-184.jpg

TSQ Heavy Duty/BRAECN Rotating Handle Stand iPad 5th-6th Gen 9.7. #184

This case is sold on Amazon under many different names, and even different listings call it different things.  But it's easy to identify this case by the giant "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap.

  • Screen opening: 7-7/8" x 5-5/16", 200 mm x 151 mm
  • Outtside dimension (Without rotating stand): 9-3/4" x 7-1/16" x 13/16", 248 mm x 178 mm x 21 mm
  • Nice silicone skin over the flimsiest two-piece breakable plastic shell imaginable
  • Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
  • Off-center folding stand makes it easy to tip over
  • Conveniently comes apart if you drop it for easy access to the iPad
  • Kids can take it apart with one hand. No kidding.
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape
uag-121.jpg

UAG Metropolis iPad Air 9.7 #121

  • Screen opening: 9-5/16" x 6-9/16", 237 mm x 167 mm
  • Outside dimensions: 9-13/16" x 7" x 5/8", 249 mm x 178 mm x 16 mm
  • Eight-sided rectangular camera opening with elastic button over home key
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
  • Easiest rigid case to insert and remove iPad
  • Available in several colors
  • Affordable - the best value among rigid cases
Best Attachment
Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, magnets, snap-in
unicorn-beetle-136.png

Unicorn Beetle iPad Air 9.7 #136

  • Screen opening: 8-1/16" x 6-1/16", 204 mm x 155 mm
  • Outside dimensions: 9-7/8" x 7-1/8" x 5/8", 251 mm x 181 mm x 15 mm
  • Eight-sided rectangular camera opening with elastic button over home key
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
  • Easiest rigid case to insert and remove iPad
  • Available in several colors
  • Affordable - the best value among rigid cases
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
unicorn-beetle-91.jpg

Unicorn Beetle iPad Air 2 9.7 #63B

  • Screen opening: 7-7/8" x 6", 200 mm x 152 mm
  • Outside dimensions: 9-7/8" x 7-1/8" x 9/16", 251 mm x 181 mm x 14 mm
  • Oval or rectangular camera opening with two small round or rhomboid openings for ambient light sensors
  • Home key is exposed to the screen opening by a rounded trapezoidal notch
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
  • Pro 9.7 version has attached folding stand
  • Easiest rigid case to insert and remove iPad
  • Available in several colors
  • Affordable - the best value among rigid cases
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
unicorn-91.png

Unicorn Beetle iPad Air 2/Pro 9.7 #91

  • Screen opening: 7-15/16" x 6", 201 mm x 153 mm
  • Outside dimensions: 9-3/4" x 7" x 5/8", 253 mm x 177 mm x 15 mm
  • Oval or rectangular camera opening with two small round or rhomboid openings for ambient light sensors
  • Home key is exposed to the screen opening by a rounded trapezoidal notch
  • Polyurethane skin over polycarbonate shell
  • Pro version includes built-in screen protector
  • Pro 9.7 version has attached folding stand
  • Easiest rigid case to insert and remove iPad
  • Available in several colors
  • Affordable - the best value among rigid cases
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
unicorn-beetle-108.png

Unicorn Beetle Pro iPad 5th/6th Gen 9.7 #108

  • Screen opening: 8-1/16" x 6-3/16", 205 mm x 158 mm
  • Outside dimensions: 9-7/8" x 7-1/16" x 5/8", 250 mm x 179 mm x 16 mm
  • Oval camera opening
  • Home key is exposed to the screen opening by a trapezoidal notch
  • Polyurethane skin over polycarbonate shell
  • Built-in screen protector
  • Attached folding stand
  • Easiest rigid case to insert and remove iPad
  • Available in several colors
  • Affordable - the best value among rigid cases
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
uzbl-89.jpg

UZBL AirWave 5th-6th Gen 9.7. #83B

This is a very expensive case whose only unique feature is a security cable that attaches with double-sided tape. If you want people to not bother stealing your iPad because it looks like it's secured to the table, this might be the case for you. Otherwise, there are many less expensive cases that provide the same or more protection to the iPad.

  • Screen opening: 8" x 6", 203 mm x 153 mm
  • Outside dimensions:  10-1/8" x 7-1/4" x 5/8", 257 mm x 184 mm x 16 mm  
Best Attachment Snap-In 
Possible Attachment Straps (last resort)
Not Suitable for Velcro, magnets, suction cups, suction tape
uzbl-361.jpg

UZBL Cushy Case iPad 5th/6th Gen 9.7 #361

  • Screen opening: 7-7/8" x 5-15/16", 199 mm x 151 mm
  • Outside dimensions: 10-1/4" x 7-9/16" x 1-5/16", 260 mm x 192 mm x 33 mm
  • Oval camera opening
  • Home key is exposed to the screen opening by a trapezoidal notch
  • EVA case foam 
  • Built-in screen protector
  • Attached folding stand
  • Easiest rigid case to insert and remove iPad
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
uzbl-103b.png

UZBL Rugged Slim Folio iPad 5th/6th Gen 9.7 #103B

  • Screen opening: 9-1/16" x 6-7/16", 231 mm x 163 mm
  • Outside dimensions: 9-7/8" x 7" x 5/8", 250 mm x 178 mm x 16 mm
  • Oval camera opening
  • Home key is exposed to the screen opening by a trapezoidal notch
  • Polyurethane skin over polycarbonate shell
  • Built-in screen protector
  • Attached folding stand
  • Easiest rigid case to insert and remove iPad
  • Available in several colors
  • Affordable - the best value among rigid cases
Best Attachment
Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
Not Suitable for Lock-in, magnets, snap-in
uzbl-85.jpg

UZBL ShockWave iPad Air 2 9.7 #85

  • Screen opening: 7-15/16" x 6", 202 mm x 152 mm
  • Outside dimensions: 10-3/16" x 7-11/16" x 11/16", 259 mm x 196 mm x 18 mm
  • Oval camera opening
  • Home key is exposed to the screen opening by a trapezoidal notch
  • EVA case foam 
  • Built-in screen protector
  • Attached folding stand
  • Easiest rigid case to insert and remove iPad
  • comes in a Variety of colors
Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
braecn-heavy-duty-184.jpg

ZenCase/ZenRich/BRAECN Rotating Handle Stand iPad 5th-6th Gen 9.7. #184

This case is sold on Amazon under many different names, and even different listings call it different things.  But it's easy to identify this case by the giant "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap.

  • Screen opening: 7-7/8" x 5-5/16", 200 mm x 151 mm
  • Outtside dimension (Without rotating stand): 9-3/4" x 7-1/16" x 13/16", 248 mm x 178 mm x 21 mm
  • Nice silicone skin over the flimsiest two-piece breakable plastic shell imaginable
  • Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
  • Off-center folding stand makes it easy to tip over
  • Conveniently comes apart if you drop it for easy access to the iPad
  • Kids can take it apart with one hand. No kidding.
Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
Possible Attachment Straps (last resort)
Not Suitable for Suction cups, suction tape