This keyguard fits the Logitech K380 Multi-Device Bluetooth Keyboard. This item does not come with a keyboard. This is to order the keyguard only.
This keyguard comes with no attachment method. While gravity will hold the keyguard in place, most users prefer to stick it to the keyboard with tape or a mounting putty like Blu-Tack. There is room for a small amount of suction cup tape.
Version - The keyguard fits either the US English version or the UK English version of the keyboard. If your keyboard supports a different language, one of these two versions may fit it. However, it is up to you to decide if it will fit. Look at the pictures closely. If even one key is shaped differently, the keyguard will not fit. The first two images above shows the US English version, where the Enter key is separate from the backslash above it, and the two shift keys are the same width. The third images shows the UK English version where the enter key is like an upside-down "L" and the left shift key is narrower than the right shift key, with the backslash just to the right of the left shift key. Non-Engllish versions could use either of those formats. Pick the US or UK layout that matches your keyboard.
Size - The default size of the keyguard is the same as the keyboard. You may optionally choose to add an oversized flange which adds an additional rim around the perimeter, extending beyond the keyboard and containing optional holes which you can use to devise your own mounting method. These holes are 0.19" in diameter and fit a #10 machine screw. Our screw kits fit these holes.
Material - The default material is laser-cut 3/16" clear acrylic. If you need a thinner keyguard, you can choose 1/8" acrylic styrene, but it makes for very shallow key openings. 1/4" acrylic is good for when you want deeper holes. For the ultimate in strength, choose polycarbonate, which has a lifetime guarantee against breakage and beveled edges which are softer to the touch than laser-cut keyguards.