How to Identify a Case for an iPad Pro 12.9

    This page covers cases that we support for keyguards to fit the 12.9" iPad Pro 12.9, iPad Pro 12.9 2nd Gen, and iPad Pro 12.9 3rd Gen.

    If you have an iPad other than a Pro 12.9, you're on the wrong page.

    For the original iPad 2, 3 or 4, look here.

    For the iPad Air/Air 2/5th-6th Generation look here.

    For the iPad Mini, look here.

    For the iPad 7th/8th Gen. 10.2, look here.

    For the iPad Air 3 10.5 or Pro 10.5, look here.

    For the iPad Air 4 10.9, look here.

    For the iPad Pro 11, look here.

    For any other iPad, look here.

    When you order a keyguard for an iPad Pro 12.9, specify the name and number of the case you find here.  You must use the red number to correctly identify a case!  Cases are listed alphabetically, but you can also search the page by the name of an iPad case to find one that is sold under more than one brand name.

    If you have an iPad Pro 12.9 case that we don't have depicted here, specify "Other" case when ordering a keyguard and send us a link to the case you have.  We'll charge you a small fee to buy the case, measure it, design a keyguard to fit it, and make and test fit the keyguard.  After that, we'll add it to our list so you can order keyguards to fit it in the future.

    adaptive-tech-rugged-rubber.png

    Adaptive Tech Solutions Rugged Rubber

    The Rugged Rubber case is a variant of the classic EVA folding handle stand. Adaptive Tech Solution's version adds a shoulder strap.

    To order a keyguard for the Rugged Rubber, choose the matching  Classic EVA case below.

    alcas-376.jpg

    AICase Heavy Duty for iPad Pro 12.9 1st/2nd Gen #376

    • Screen opening: 10-5/8" x 8", 270 mm x 202 mm
    • Outside dimensions: 12-5/8" x 9-3/16" x 11/16", 321 mm x 234 mm x 17 mm   
    • Silicone skin over hard plastic shell
    • Built-in off-centered folding stand makes it a little unstable
    Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
    Possible Attachment Straps (last resort)
    Not Suitable for Suction cups, suction tape, magnets
    armorbox-kido-179.png

    ArmorBox Kido

    The ArmorBox Kido case is a variant of the classic EVA folding handle stand.

    To order a keyguard for the ArmorBox Kido, choose the matching  Classic EVA case below.

    avawo-kids-case.jpg

    Avawo Kids Case

    The Avawo Kids Case is a variant of the classic EVA folding handle stand.

    To order a keyguard for the Avawo Kids Case, choose the matching  Classic EVA case below.

    ballistic-tough-jacket-56.png

    Ballistic Tough Jacket iPad Pro 12.9 #56

    • Screen opening: 11-5/8" x 8-7/16", 296 mm x 215 mm
    • Outside dimensions, not including detachable stand or corner bumpers: 12-1/4" x 8-15/16" x 9/16", 311 mm x 227 mm x 15 mm
    • Tough plastic shell with soft elastic insert to hold iPad and protect corners
    • Detachable stand clips around hard shell
    • Discontinued, but came in several colors
    Best Attachment Snap-in or lock-in for permanent mounting
    Possible Attachment Suction cups, suction tape,Straps (last resort)
    Not Suitable for Velcro, magnets 
    bam-306.jpg

    Bam Bino/Ledniceker iPad Pro 12.9 3rd Gen #306

    • Screen opening: 10-1/2" x 7-15/16", 267 mm x 202 mm
    • Outside dimensions (with handle): 12-7/16" x 11" x 7/8", 315 mm x 280 mm x 23 mm
    • Removable front bezel with built-in screen protector
    • Comes in a variety of colors 
    • EVA material
    Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
    Possible Attachment Straps (last resort)
    Not Suitable for Suction cups, suction tape, magnets
    big-grips-lift-52.jpg

    Big Grips Lift iPad Pro 12.9 1st Gen/2nd Gen #52

    • Screen opening: 11-9/16" x 8-1/4", 294 mm x 210 mm
    • Outside dimensions (with handle): 14-1/16" x 11-15/16" x 1-5/8", 356 mm x 303 mm x 40 mm
    • Comes in several colors
    • Does not fit 3rd generation 12.9
    Best Attachment Snap-in or lock-in for permanent mounting
    Possible Attachment Straps (last resort)
    Not Suitable for Suction cups, suction tape, Velcro, magnets
    bolete-kids-shock-proof.png

    Bolete Kids Shock Proof

    The Bolete Kids Shock Proof is a variant of the classic EVA folding handle stand.

    To order a keyguard for the Bolete Kids Shock Proof, choose the matching  Classic EVA case below.

    buddibox-eva-series.png

    BuddiBox EVA Series

    The BuddiBox EVA Series is a variant of the classic EVA folding handle stand.

    To order a keyguard for the BuddiBox EVA Series, choose the matching  Classic EVA case below.

    braecn-303.jpg

    BRAECN Heavy Duty w/ Swivel Stand iPad 12.9 3rd/4th Gen #303

    This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant "X" on the back, the rotating Velcro hand strap, and the delicate shoulder strap.

    • Screen opening:10-7/16" x 7-7/8", 265 mm x 200 mm
    • Outside dimensions (without rotating stand): 12-1/8" x 9-15/16" x 13/16", 307 mm x 252 mm x 21 mm
    • Nice silicone skin over the flimsiest two-piece breakable plastic shell imaginable
    • Thin fabric shoulder strap with extremely thin metal or plastic clips, depending on the brand
    • Off-center folding stand makes it easy to tip over
    • Conveniently comes apart if you drop it for easy access to the iPad
    • Kids can take it apart with one hand. No kidding.
    Best Attachment Snap-In or lock-in for permanent mounting, Velcro or magnets for quick change
    Possible Attachment Straps (last resort)
    Not Suitable for Suction cups, suction tape
    cellular-360-308.jpg

    Cellular 360 iPad Pro 12.9 1st Generation #308

    • Screen opening: 10-1/2" x 7-7/8", 266 mm x 200 mm
    • Outside dimensions (not including rotating handle): 12-9/16" x 9-3/16" x 5/8", 316 mm x 234 x 16 mm
    • Comes in several colors
    • Rotating handle with folding stand
    • Optional stylus and shoulder strap
    Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
    Possible Attachment Straps (last resort)
    Not Suitable for Suction cups, suction tape, magnets
    armorbox-kido-59.jpg

    Classic EVA iPad Pro 12.9 1st/2nd Generation #59

    This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

    • Screen opening: 11-5/8" x 8-3/8", 295 mm x 212 mm
    • Outside dimensions (with handle): 12-1/16" x 13" x 15/16", 327 mm x 330 mm x 23 mm
    • Comes in several colors
    • Folding handle becomes stand
    Best Attachment Snap-In
    Possible Attachment Suction cups, suction tape, straps (last resort)
    Not Suitable for Lock-in, Velcro, magnets
    cooper-dynamo-27.jpg

    Classic EVA iPad Pro 12.9 3rd/4th/5th Generation #27

    This case is sold under a huge variety of brand names. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

    • Screen opening: 10-5/8" x 8", 270 mm x 204 mm
    • Outside dimensions (with handle): 11-7/8" x 12-15/16" x 7/8", 301 mm x 328 mm x 22 mm
    • Comes in several colors
    • Folding handle becomes stand
    Best Attachment Snap-In
    Possible Attachment Suction cups, suction tape, straps (last resort)
    Not Suitable for Lock-in, Velcro, magnets
    cooper-dynamo.jpg

    Cooper Dynamo

    The Cooper Dynamo is a variant of the classic EVA folding handle stand.

    To order a keyguard for the Cooper Dynamo, choose the matching Classic EVA case above.

    etopxizu-tablet-case.png

    eTopxizu Tablet Case

    The eTopxizu Tablet Case is a variant of the classic EVA folding handle stand.

    To order a keyguard for the eTopxizu Tablet Case, choose the matching Classic EVA case above.

    fintie-kiddie.jpg

    Fintie Kiddie (not Kiddie Light)

    The Fintie Kidde, also called the Fintie Casebot Kiddie, is a variant of the classic EVA folding handle stand.  Do not confuse it with the Fintie Kiddie Light, or the Fintie Casebot Kiddie Light.

    To order a keyguard for the Fintie Kiddie, choose the matching Classic EVA case above.

    griffin-survivor-all-terrain-39.png

    Griffin Survivor All-Terrain iPad Pro 12.9 1st-2nd Gen #39

    • Screen opening: 10-1/2" x 7-7/8", 267 mm x 200 mm
    • Outside dimensions: 12-3/4" x 9-7/16" x 3/4", 324 mm x 239 mm x 19 mm
    • Oval camera opening with two openings for ambient light sensors
    • Detachable folding stand clips to only one side of the case
    • Comes in black
    Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
    Possible Attachment Straps (last resort)
    Not Suitable for Suction cups, suction tape
    griffin-survivor-slim-48.png

    Griffin Survivor Slim iPad Pro 12.9 1st/2nd Gen #48

    • Screen opening: 10-7/16" x 7-13/16", 265 mm x 198 mm
    • Outside dimensions: 12-7/8" x 9-7/16" x 11/16", 327 mm x 240 mm x  18mm
    • Oval camera opening
    • Home key is exposed to the screen opening by a rounded V-shaped cutout
    • Sturdy attached folding stand
    • Available in different colors
    Best Attachment Snap-in or lock-in for permanent mounting, Velcro or magnets for quick change
    Possible Attachment Straps (last resort)
    Not Suitable for Suction cups, suction tape
    gumdrop-droptech-51.jpg

    Gumdrop DropTech iPad Pro 12.9 1st/2nd Gen #51

    • Screen opening: 11-15/16" x 8-9/16", 303 mm x 218 mm
    • Outside dimensions: 12-5/16" x 9-1/16" x 5/8", 313 mm x 231 mm x 15 mm
    • Silicone skin bonded to ABS frame
    • Stylus holder on top/right, with cutout for smart keyboard on bottom/left
    • Available in a variety of colors
    Best Attachment
    Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
    Not Suitable for Lock-in, magnets, snap-in
    gumdrop-hideaway-36.jpg

    Gumdrop Hideaway iPad Pro 12.9 1st/2nd Gen #36

    • Screen opening: 11-1/4" x 7-7/8", 285 mm x 200 mm
    • Outside dimensions: 12-7/16" x 9-11/16" x 7/8", 317 mm x 246 mm x 21 mm
    • Silicone skin over ABS shell 
    • Attached folding handle stand
    • Available in a variety of colors
    Best Attachment Snap-In or lock-in for permanent mounting
    Possible Attachment Suction cups, suction tape, straps (last resort)
    Not Suitable f Velcro, magnets
    hde-shock-proof.png

    HDE Shock Proof

    The HDE Shock Proof, also called the HDE Kids Case, is a variant of the classic EVA folding handle stand. Do not confuse it with the HDE Shockproof Case with a built-in screen protector.

    To order a keyguard for the HDE Shock Proof, choose the matching Classic EVA case above.

    iblason-324.jpg

    i-Blason Halo iPad Pro 12.9 3rd Gen #324

    • Screen opening (not including pencil holder): 10-1/2" x 8-1/2", 267 mm x 215 mm
    • Outside dimensions: 11-5/16" x 9" x 9/16", 287 mm x 229 mm x 14 mm  
    • Flexible but stiff transparent shell with folio cover
    • Folio cover doubles as folding stand
    • Holder for stylus or Apple Pencil
    Best Attachment
    Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
    Not Suitable for Lock-in, magnets, snap-In
    axtion-bold-29.jpg

    Joy Factory aXtion Bold iPad Pro 12.9 1st-2nd Gen #29

    This is a very expensive case that provides adequate protection against damage to the iPad.

    • Screen opening: 10-1/2" x 7-15/16", 267 mm x 201 mm
    • Outside dimensions (measured near the corners):  12-15/16" x 9-1/2" x 15/16", 328 mm x 242 mm x 23 mm  
    • 360° rotating handle with small, flimsy stand
    • Built-in screen protector
    • High-quality silicone skin is difficult to seat over thin, flimsy frame
    • Slotted corners for attaching shoulder strap (not included)
    Best Attachment Snap-In or Lock-in for permanent mounting
    Possible Attachment Straps (last resort)
    Not Suitable for Velcro, magnets, suction cups, suction tape
    axtion-bold-305.jpg

    Joy Factory aXtion Bold iPad Pro 12.9 3rd Gen #305

    This is a very expensive case whose only unique feature is a security cable that attaches with double-sided tape. If you want people to not bother stealing your iPad because it looks like it's secured to the table, this might be the case for you. Otherwise, there are many less expensive cases that provide the same or more protection to the iPad.

    • Screen opening: 10-7/16" x 7-13/16", 265 mm x 199 mm
    • Outside dimensions (measured near the corners):  11-13/16" x 9-3/16" x 7/8", 300 mm x 233 mm x 22 mm  
    • 360° rotating handle with small, flimsy stand
    • Built-in screen protector
    • High-quality silicone skin is difficult to seat over thin, flimsy frame
    • Security cable taped to back of iPad is apparent theft deterrent
    • Slotted corners for attaching shoulder strap (not included)
    Best Attachment Snap-In or Lock-in for permanent mounting
    Possible Attachment Straps (last resort)
    Not Suitable for Velcro, magnets, suction cups, suction tape
    kayscase-kidbox.png

    Kay's Case KidBox

    The Kay's Case KidBox is a variant of the classic EVA folding handle stand.

    To order a keyguard for the Kay's Case KidBox, choose the matching Classic EVA case above.

    lifeproof-nuud-49.png

    LifeProof NÜÜD iPad Pro 12.9 #49

    • Screen opening: 11-3/8" x 8-5/16", 289 mm x 211 mm
    • Outside dimensions: 12-3/4" x 9-7/16" x 9/16", 325 mm x 240 mm x 15 mm 
    • Distinctive flattened-arch bulge around home key
    • Silicone skin over polycarbonate shell 
    • Available in black or white 
    • Claims to be waterproof 
    • Very expensive 
    Best Attachment Snap-In or Lock-in for permanent mounting (breaks the waterproof seal)
    Possible Attachment Straps (last resort)
    Not Suitable for Velcro, magnets, suction cups, suction tape (for some apps)
    maxcase-29b.jpg

    MAX Cases Extreme Shield iPad Pro 12.9 3rd/4th Gen #29B

    Easily confused for the case #176 above.  The difference is that this model does not have the built-in pencil holder.  Keyguards made for the #176 will fit the #29B, but not vice versa.

    • Screen opening:  10-3/8" x 7-13/16", 264 mm x 199mm
    • Outside dimensions: 11-7/16" x 8-7/8" x 9/16", 291 mm x 225 mm x 15 mm
    • Rotating handle and adjustable kickstand
    Best Attachment Snap-In or Lock-in for permanent mounting
    Possible Attachment Straps (last resort)
    Not Suitable for Velcro, magnets, suction cups, suction tape
    max-176.jpeg

    MAX Cases Extreme Shield w/ Pencil Garage iPad Pro 12.9 3rd/4th Gen #176

    Easily confused for the case #29B above.  The difference is that this model has the built-in pencil holder.  Keyguards made for the #176 will fit the #29B, but not vice versa.

    • Screen opening:  10-3/8" x 7-13/16", 263 mm x 198mm
    • Outside dimensions: 11-7/16" x 9-7/16" x 5/8", 291 mm x 239 mm x 16 mm
    • Rotating handle and adjustable kickstand
    Best Attachment Snap-In or Lock-in for permanent mounting
    Possible Attachment Straps (last resort)
    Not Suitable for Velcro, magnets, suction cups, suction tape
    miesherk-30.jpg

    Miesherk Rotating Kickstand iPad Pro 12.9 3rd Gen #30

    Do not confuse this for the version with the non-rotating kickstand and the holder for the Apple Pencil.

    • Screen opening:  10-3/8" x 7-13/16", 264 mm x 199 mm
    • Outside dimensions (not including rotating handle): 11-7/16" x 8-7/8" x 5/8", 291 mm x 226 mm x 15 mm
    • Rotating handle and adjustable kickstand
    Best Attachment Snap-In or Lock-in for permanent mounting
    Possible Attachment Straps (last resort)
    Not Suitable for Velcro, magnets, suction cups, suction tape
    monoprice-kidz-cover.jpg

    Monoprice Kidz Cover

    The Monoprice Kidz Cover is a variant of the classic EVA folding handle stand.

    To order a keyguard for the Monoprice Kidz Cover, choose the matching  Classic EVA case above.

    muse-302.jpg

    Muse Case For iPad 12.9 3rd Gen #302

    • Screen opening: 10-15/16" x 8-3/8", 278 mm x 212 mm
    • Outside dimensions: 11/3/8" x 8-3/4" x 9/16", 288 mm x 222 mm x 14 mm
    • Cover doubles as folding stand
    • Holder for stylus or Apple Pencil
    Best Attachment
    Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
    Not Suitable for Lock-in, magnets, snap-in
    newstyle-shockproof.jpg

    NEWSTYLE Shockproof Light Weight

    NEWSTYLE Shockproof Light Weight is a variant of the classic EVA folding handle stand.

    To order a keyguard for the NEWSTYLE Shockproof Light Weight, choose the matching  Classic EVA case above.

    nocase12.9-0.jpg

    No Case For iPad Pro 12.9 Any Generation #0

    When you order a keyguard for an iPad that is not in a case, choose "No Case" from the list of cases.

    Best Attachment Velcro for quick change, suction cups, suction tape
    Possible Attachment Straps (last resort)
    Not Suitable for Magnets, snap-in or lock-in 
    otterbox-35.jpg

    Otterbox Defender iPad Pro 12.9 1st Gen #35

    • Screen opening:  10-1/2" x 7-15/16", 267 mm x 202 mm
    • Outside dimensions (not including removable stand): 12-1/2" x 9-3/16" x 5/8", 317 mm x 233 mm x 17 mm
    • Funky clip-on back piece removes to become a huge folding stand
    • Elastic skin over 2-part polycarbonate frame
    • Trapezoidal camera opening 
    • Home key is exposed to the screen opening by a rounded V-shaped cutout
    Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
    Possible Attachment Straps (last resort)
    Not Suitable for Suction cups, suction tape, magnets
    otterbox-defender-31.png

    Otterbox Defender iPad Pro 12.9 3rd/4th Gen #31

    • Screen opening:  10-9/16" x 8", 268 mm x 203 mm
    • Outside dimensions (with stand): 11-1/2" x 8-15/16" x 1-1/8", 292 mm x 227 mm x 29 mm
    • 3 notches at camera end of screen opening for cameras and ambient light sensors
    • Funky clip-on back piece removes to become a huge folding stand
    • Elastic skin over 2-part polycarbonate frame
    Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
    Possible Attachment Straps (last resort)
    Not Suitable for Suction cups, suction tape, magnets
    otterbox-symmetry-28.png

    Otterbox Symmetry iPad Pro 12.9 1st-2nd Gen #28

    • Screen opening: 11-13/16" x 8-7/16", 300 mm x 215 mm
    • Outside dimensions: 12-3/8" x 9-1/16" x 11/16", 312 mm x 230 mm x 18 mm
    • Stiff elastic shell
    • Folio cover folds to back of iPad to become stand
    Best Attachment Snap-in or lock-in for permanent mounting
    Possible Attachment Suction cups, suction tape,Straps (last resort)
    Not Suitable for Velcro, magnets     
    otterbox-386.jpg

    Otterbox Symmetry For iPad Pro 12.9 3rd/4th Gen #386

    • Screen opening: 11" x 8-7/16", 280 mm x 214 mm
    • Outside dimensions: 11-1/4" x 8-11/16" x 7/16", 286 mm x 221 mm x 11 mm
    • Stiff elastic shell
    • Folio cover folds to back of iPad to become stand
    Best Attachment Suction cups, suction tape
    Possible Attachment Straps (last resort)
    Not Suitable for Velcro, magnets, snap-in or lock-in 
    pure-sense-buddy.png

    Pure Sense Buddy

    Pure Sense Buddy is a variant of the classic EVA folding handle stand. It's different in that it includes a thin shoulder strap and an anti-microbial surface.

    o order a keyguard for the Pure Sense Buddy, choose the matching  Classic EVA case above.

    ultimate-ii.jpg

    RJ Cooper Ultimate II

    The Ultimate II is a variant of the classic EVA folding handle stand. RJ Cooper's version adds a shoulder strap and a more sturdy stand.

    To order a keyguard for the Ultimate II, choose the matching  Classic EVA case above.

    roocase-kidarmor.jpg

    Roocase KidArmor

    The Roocase KidArmor is a variant of the classic EVA folding handle stand. 

    To order a keyguard for the Roocase KidArmor, choose the matching  Classic EVA case above.

    time-59b.jpg

    SIBEITU/TimeCity Rotating Handle Stand iPad Pro 12.9 3rd-4th Gen #59B

    This case is sold on Amazon under several different brand names. You'll find in on our list of cases under the "TimeCity" brand.  Do not confuse this for the SUPFIVE case #32 B below.  Check the outside dimensions to be sure.

    When ordering a keyguard, you will not find this case on our "Fit to Case" list.  Instead, choose the  TimeCity case #59B.

    • Screen opening: 10-3/8" x 7-13/16", 264 mm x 198 mm
    • Outside dimensions:  11-13/16" x 9-3/4" x 7/8", 300 mm x 248 mm x 22 mm 
    • Rotating handle stand
    • Some versions come with a shoulder strap
    • Pencil garage on front
    Best Attachment Snap-In or lock-in for permanent mounting
    Possible Attachment Velcro (barely adequate and not recommended), straps (last resort)
    Not Suitable for Magnets, suction cups, suction tape
    stm-dux-32.jpg

    STM Dux Plus iPad 12.9 1st/2nd Gen #32A

    • Screen opening: 11-7/8" x 8-1/2", 302 mm x 217 mm
    • Outside dimensions: 12-7/16" x 9-1/2" x 3/4", 317 mm x 241 mm x 18 mm
    • Fake leather magnetic "smart" folio cover
    • Folio cover doubles as folding stand
    • Holder for stylus or Apple Pencil
    Best Attachment
    Possible Attachment Velcro, suction cups, suction tape, straps (last resort)
    Not Suitable for Lock-in, magnets, snap-in
    supfive-32b.jpg

    SUPFIVE Rotating Handle Stand Pro 12.9 3rd-4th-5th Gen Gen #32B

    Do not confuse this case for the TimeCity case #59B below.  Check the outside dimensions to be sure.

    • Screen opening: 10-3/8" x 7-13/16", 264 mm x 198 mm
    • Outside dimensions: 11-11/16" x 9-9/16" x 3/4", 297 mm x 243  mm x 20 mm
    Best Attachment Snap-in or lock-in for permanent mounting
    Possible Attachment Velcro (barely adequate and not recommended), straps (last resort)
    Not Suitable for Suction cups, suction tape, magnets
    time-59b.jpg

    TimeCity Rotating Handle Stand iPad Pro 12.9 3rd-4th Gen #59B

    This case is sold on Amazon under several different brand names. You'll find in on our list of cases under the "TimeCity" brand.  Do not confuse this for the SUPFIVE case #32 B above.  Check the outside dimensions to be sure.

    • Screen opening: 10-3/8" x 7-13/16", 264 mm x 198 mm
    • Outside dimensions:  11-13/16" x 9-3/4" x 7/8", 300 mm x 248 mm x 22 mm 
    • Rotating handle stand
    • Some versions come with a shoulder strap
    • Pencil garage on front
    Best Attachment Snap-In or lock-in for permanent mounting
    Possible Attachment Velcro (barely adequate and not recommended), straps (last resort)
    Not Suitable for Magnets, suction cups, suction tape
    tobii-dynavox-41.png

    Tobii-Dynavox Speech Case Pro Keyguard Holder iPad Pro 12.9 1st/2nd Gen #41

    • Screen opening: 10-9/16" x 8", 268 mm x 203 mm
    • Outside dimensions: 12-5/8" x 9-1/4" x 1-7/16", 321 mm x 234 mm x 40 mm
    • Polycarbonate keyguard holder fits over the Speech Case
    Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
    Possible Attachment Straps (last resort)
    Not Suitable for Suction cups, suction tape, magnets
    travellor-kido.jpg

    Travellor Kido

    The Travellor Kido is a variant of the classic EVA folding handle stand. 

    To order a keyguard for the Travellor Kido, choose the matching  Classic EVA case above.

    unicorn-beetle-47.png

    Unicorn Beetle Pro iPad Pro 12.9 1st/2nd Gen #47

    • Screen opening: 10-5/8" x 8", 270 mm x 203 mm
    • Outside dimensions: 12-7/16" x 9" x 11/16", 316 mm x 228 mm x 17 mm
    • Rounded trapezoidal notches in both ends to expose camera and home key
    • Two small round openings for ambient light sensors
    • Polyurethane skin over polycarbonate shell
    • Pro version comes with built-in screen protector
    • Attached folding stand
    • Easiest rigid case to insert and remove iPad
    • Available in several colors
    • Affordable - the best value among rigid cases
    Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
    Possible Attachment Straps (last resort)
    Not Suitable for Suction cups, suction tape, magnets
    unicorn-beetle-33.png

    Unicorn Beetle Pro iPad Pro 12.9 3rd Gen (non-Apple pencil) #33

    • Screen opening: 10-3/8" x 7-3/4", 264 mm x 197 mm
    • Outside dimensions: 11-7/16" x 8-7/8" x 5/8", 291 mm x 226 mm x 16 mm
    • Polyurethane skin over polycarbonate shell
    • Built-in screen protector
    • Attached folding stand
    • Easiest rigid case to insert and remove iPad
    • Available in black on black
    • Affordable - the best value among rigid cases

    Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
    Possible Attachment Straps (last resort)
    Not Suitable for Suction cups, suction tape, magnets
    turtle-34.jpg

    ZtotopCases Turtle iPad Pro 12.9 5th Gen #34

    • Screen opening: 10-3/8" x 7-3/4", 263 mm x 198 mm
    • Outside dimensions: 11-7/16" x 9-1/16" x 9/16", 290 mm x 230 mm x 15 mm
    • Built-in screen protector
    • Attached folding stand
    • Apple Pencil holder
    Best Attachment Snap-in or lock-in for permanent mounting, Velcro for quick change
    Possible Attachment Straps (last resort)
    Not Suitable for Suction cups, suction tape, magnets