How to Identify a Case for an iPad 10th Gen 10.9

How to Identify a Case for an iPad 10th Gen 10.9

This page covers cases that we support for keyguards to fit the iPad 10th Gen 10.9".

If you have an iPad other than a 10th Gen 10.9", you're on the wrong page.  This page is not for the 10.9" iPad Air 4/Air 5.

For the iPad Air 4/Air 5 10.9", look here.

For any other iPad, look here.

When you order a keyguard for an iPad 10th Gen 10.9, specify the name and number of the case you find here.  You must use the red number to correctly identify a case!  Cases are listed alphabetically, but you can also search the page by the name of an iPad case to find one that is sold under more than one brand name.

If you have an iPad 10th Gen 10.9" case that we don't have depicted here, specify "Other" case when ordering a keyguard and send us a link to the case you have.  We'll charge you a small fee to buy the case, measure it, design a keyguard to fit it, and make and test fit the keyguard.  After that, we'll add it to our list so you can order keyguards to fit it in the future.

adaptive-tech-rugged-rubber.png

Adaptive Tech Solutions Rugged Rubber

The Rugged Rubber case is a variant of the classic EVA folding handle stand. Adaptive Tech Solution's version adds a shoulder strap.

To order a keyguard for the Rugged Rubber, choose the matching  Classic EVA case below.

avawo-400a.jpg

AVAWO/BMOUO Folding Handle w/ Removable Screen Protector (not the Football Case!) iPad 10th Gen 10.9 #400A

This case is sold under a variety of brand names.  It's easy to spot because of the folding handle and the distinctive pattern of depressions in the corners of the case next to the folding handle.

To order a keyguard to fit this case, choose the  BMOUO Folding Handle Case #400A below.

avawo-449.jpg

Avawo Kids Case

The Avawo Kids Case is a variant of the classic EVA folding handle stand.

To order a keyguard for the Avawo Kids Case, choose the matching  Classic EVA case below.

batyue-461.jpg

BATYUE/BRAECN Rotating Handle Stand iPad 10th Gen 10.9 #461

This case is sold under several different brand names. But it's easy to identify this case by the giant "X" on the back and the rotating Velcro strap stand.

Do not confuse this with the similar rotating ring stand below. This one has a Velcro strap on the back. That case has a rigid plastic ring stand centered on the back of the case.

When ordering a keyguard to fit this case, you'll find it on our list as the  BRAECN case #461.

batyue-451.jpg

BATYUE/BRAECN Rotating Ring Stand iPad 10th Gen 10.9 #451

This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant "X" on the back and the squared-off ring stand.

Do not confuse this with the similar rotating handle stand. This case has a rigid plastic ring stand centered on the back of the case. That one has a Velcro strap that is placed off-center on the back. If you're going to choose one, this one is much more durable, the stand isn't as tippy, and it's harder for the kids to take apart.

When ordering this case, you won't find it on our "To Fit Case" list. Instead, choose the BRAECN Rotating Ring Stand #451.

bmouo-400a.jpg

BMOUO/AVAWO Folding Handle w/ Removable Screen Protector (not the Football Case!) iPad 10th Gen 10.9 #400A

This case may be sold under a variety of brand names.  It's easy to spot because of the folding handle and the distinctive pattern of depressions in the corners of the case next to the folding handle.

  • Screen opening: 9-1/8" x 6-3/8", 232 mm x 162 mm
  • Outside dimensions (with handle): 10-11/16" x 10-11/16" x 7/8", 275 mm x 275 mm x 25 mm
  • Folding handle becomes stand
  • Removable front bezel with built-in screen protector
  • Impact-resistant EVA material
  • Comes in a variety of colors 
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Elastic straps (last resort)
Not Suitable for Suction cups, suction tape, Velcro, magnets
bmouo-397.jpg

BMOUO/LTROP Football Case w/ Removable Screen Protector iPad 10th Gen 10.9 #397

This case is sold under a variety of brand names.  It's easy to spot because of the distinctive openings on the upper corners where a shoulder strap (not included) could be attached, and the large football embossed on the back.   

You'll find this case on our "To Fit Case" list as the  LTROP Football Case #397.

bolete-449.jpg

Bolete Kids Shock Proof

The Bolete Kids Shock Proof is a variant of the classic EVA folding handle stand.

To order a keyguard for the Bolete Kids Shock Proof, choose the matching  Classic EVA case below.

braecn-451.jpg

BRAECN/BATYUE/SCSVPN Rotating Ring Stand iPad 10th Gen 10.9 #451

This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant "X" on the back and the squared-off ring stand.

Do not confuse this with the similar rotating handle stand below. This case has a rigid plastic ring stand centered on the back of the case. That one has a Velcro strap on the back. 

  • Screen opening: 9-1/8" x 6-3/8", 232 mm x 162 mm
  • Outside dimensions (without handle stand): 10-5/8" x 7-7/8" x 13/16", 268 mm x 200 mm x 21 mm
  • Hard shell with elastic skin
  • Removabe front clip for easy insertion of iPad
  • Rotating ring stand
  • Shoulder strap
  • Apple pencil holder on back
  • Comes in several colors   
Best Attachment Snap-In, lock-in
Possible Attachment Velcro (weak and holds keyguard high off the screen), elastic straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
braecn-461-blue.jpg

BRAECN/BATYUE/ZenRich/KIQ Rotating Handle Stand iPad 10th Gen 10.9 #461

This case is sold on Amazon under many different names, and even different listings call it different things. But it's easy to identify this case by the giant "X" on the back and the rotating Velcro strap stand.

Do not confuse this with the similar rotating ring stand above. This one has a Velcro strap on the back. That case has a rigid plastic ring stand centered on the back of the case.

  • Screen opening: 9-1/8" x 6-3/8", 232 mm x 162 mm
  • Outside dimensions (without handle stand): 10-1/2" x 7-7/8" x 13/16", 268 mm x 200 mm x 21 mm
  • Hard shell with elastic skin
  • Removabe front clip for easy insertion of iPad
  • Rotating handle stand
  • Shoulder strap
  • Apple pencil holder on back
  • Comes in several colors   
Best Attachment Snap-In, lock-in
Possible Attachment Velcro (weak and holds keyguard high off the screen), elastic straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
brenthaven-453.jpg

Brenthaven Bounce iPad 10th Gen #485

  • Screen opening: 9-5/16" x 6-5/8", 236 mm x 168 mm
  • Outside dimensions (including handle): 10-15/16" x 11-1/2" x 7/8", 276 mm x 289 mm x 25 mm
  • Tough EVA foam
  • Folding handle becomes stand
  • Available in black only
Best Attachment

Snap-in 

Possible Attachment Elastic straps (last resort)
Not Suitable for Lock-in, suction cups, suction tape, Velcro, magnets
ltrop-449.jpg

Classic EVA iPad 10th Gen 10.9 #449

This case is sold under a huge variety of brand names, too many to list. There's not actually a "Classic EVA" brand, but that's the name we use as a catch-all to identify them.

This model fits both the iPad Air 4 10.9" and iPad Pro 11.  Earlier versions did not have the two small openings for the ambient light sensors shown in this picture, only the notch between them.

  • Screen opening: 9-3/8" x 6-11/16", 238 mm x 169 mm
  • Outside dimensions (with handle): 10-9/16" x 11" x 7/8", 269 mm x 282 mm x 22 mm
  • Folding handle becomes stand
  • Comes in several colors
Best Attachment Snap-in
Possible Attachment Suction cups (partial blockage of some cells), suction tape, straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
dynamo-449.jpg

Cooper Dynamo (not RE)

The Cooper Dynamo is a variant of the classic EVA folding handle stand. Don't confuse it with the Cooper DynamoRE described below, which comes with a removable screen protector frame.

To order a keyguard for the classic Cooper Dynamo, choose the matching Classic EVA case above.

dynamo-re-414.jpg

Cooper DynamoRE iPad 10th Gen 10.9 #414

This case is a variant of the Cooper Dynamo case that comes with a screen protector in a frame that slips into the front of the case. Don't confuse it with the regular Cooper Dynamo described above.  The regular Dynamo does not have the removable screen protector frame.

  • Screen opening: 9-1/8" x 6-3/8", 231 mm x 163 mm
  • Outside dimensions (with handle): 11" x 11-1/2" x 15/16", 280 mm x 291 mm x 23 mm
  • Durable EVA foam
  • Folding handle becomes stand
  • Removable screen protector frame clips into front opening
  • Comes in several colors
Best Attachment Snap-in or lock-in
Possible Attachment Suction cups (partial blockage of some cells), suction tape, straps (last resort)
Not Suitable for Velcro, magnets
fintie-449.jpg

Fintie Kiddie (not Kiddie Light)

The Fintie Kidde, also called the Fintie Casebot Kiddie, is a variant of the classic EVA folding handle stand.  Do not confuse it with the Fintie Kiddie Light, or the Fintie Casebot Kiddie Light.

To order a keyguard for the Fintie Kiddie, choose the matching Classic EVA case above.

gumdrop-464.jpg

Gumdrop Hideaway iPad 10th Gen 10.9 #464

  • Screen opening: 9-1/4" x 6-9/16", 236 mm x 167 mm
  • Outside dimensions (without pencil holder): 10-1/4" x 7-5/8" x 11/16", 261 mm x 194 mm x 18 mm
  • Silicone skin over polyurethane frame
  • Cool magnetic folding stand
  • Apple Pencil holder on one edge
  • Comes in several colors
Best Attachment Snap-in or lock-in
Possible Attachment Suction cups or suction tape (partial blockage of some cells - not suitable for grids of 6 x 7 or higher), elastic straps (last resort)
Not Suitable for Velcro, magnets
hde-shock-proof.jpg

HDE Shock Proof

The HDE Shock Proof, also called the HDE Kids Case, is a variant of the classic EVA folding handle stand. Do not confuse it with the HDE Shockproof Case with a built-in screen protector.

To order a keyguard for the HDE Shock Proof, choose the matching Classic EVA case above.

axtion-bold-mp-395.jpg

Joy Factory aXtion Bold MP iPad 10th Gen 10.9 #395

  • Screen opening: 9-3/16" x 6-7/16", 233mm x 163 mm
  • Outside dimensions (without handle & stand): 10-13/16" x 8-1/8" x 7/8", 275 mm x 206 mm x 23 mm
  • Hard, thin shell with elastic skin
  • Rotating ring stand with silicone hand strap
  • Apple pencil holder on one side
  • Black only
    Best Attachment Snap-in, lock-in
    Possible Attachment Elastic straps (last resort)
    Not Suitable for Suction cups, suction tape, Velcro, magnets    
kiq-461.jpg

KIQ/BRAECN Rotating Handle Stand iPad 10th Gen 10.9 #461

This case is sold under several different brand names. But it's easy to identify this case by the giant "X" on the back and the rotating Velcro strap stand.

Do not confuse this with the similar rotating ring stand above. This one has a Velcro strap on the back. That case has a rigid plastic ring stand centered on the back of the case.

When ordering a keyguard to fit this case, you'll find it on our list as the  BRAECN case #461.

ltrop-449.jpg

LTROP Durable Handle Stand

The LTROP Durable Handle Stand case is a variant of the Classic EVA folding handle case.

To order a keyguard for the LTROP Durable Handle Stand, choose the matching  Classic EVA case above.

ltrop-397.jpg

LTROP/BMOUO Football Case w/ Removable Screen Protector iPad 10th Gen 10.9 #397

This case is sold under a variety of brand names.  It's easy to spot because of the distinctive openings on the upper corners where a shoulder strap (not included) could be attached, and the large football embossed on the back.   

  • Screen opening: 9-1/8" x 6-3/8", 232 mm x 162 mm
  • Outside dimensions (with handle): 10-5/8" x 9-1/2" x 1-1/4", 270 mm x 242 mm x 32 mm
  • Impact-resistant EVA material over hard plastic frame with built-in screen protector
  • Football embossed on the back
  • Folding stands in back corners
  • Comes in a variety of colors
Best Attachment Snap-in or lock-in for permanent mounting
Possible Attachment Elastic straps (last resort)
Not Suitable for Suction cups, suction tape, Velcro, magnets
ltrop-486.jpg

LTROP "Iron Man" Case iPad 10th Gen 10.9 #486

This case is sold under a variety of brand names.  It's easy to spot because of the large "Iron Man" embossed on the back which kicks out into a stand.   

  • Screen opening: 9-5/16" x 6-7/16", 238 mm x 164 mm
  • Outside dimensions (with handle): 13-1/2" x 9-7/16" x 1-1/4", 342 mm x 240 mm x 32 mm
  • Impact-resistant EVA material
  • "Iron Man" embossed on the back becomes kick stand
  • Clip-on shoulder strap
  • Comes in a variety of colors
Best Attachment Snap-in for permanent mounting
Possible Attachment Elastic straps (last resort)
Not Suitable for Lock-in, suction cups, suction tape, Velcro, magnets
mangix-463.jpg

Mangix Waterproof iPad 10th Gen 10.9 #463

  • Screen opening: 9-3/16" x 6-1/2", 233 mm x 164 mm
  • Outside dimensions (including pencil holder): 10-5/16" x 7-9/16" x 9/16", 262 mm x 192 mm x 14 mm
  • Hard plastic two-piece shell
  • Built-in screen protector
Best Attachment Snap-In or lock-in for permanent mounting (breaks waterproof seal), Velcro for quick change
Possible Attachment Suction tape (if app provides room), elastic straps (last resort)
Not Suitable for Suction cups, magnets
miesherk-468.jpg

Miesherk Rotating Handle Stand iPad 10th Gen 10.9 #468

Comes in two variants.  The FTL model looks like the picture here.  The MTL model has an additional "winged" pattern on the back.  Both are interchangeable as far as the keyguard is concerned.

  • Screen opening: 8-15/16" x 6-5/16", 228 mm x 160 mm
  • Outside dimensions (without rotating handle): 10-1/2" x 8-1/4" x 11/16", 267 mm x 209 mm x 17 mm
  • TPU skin over polycarbonate frame
  • Rotating handle/stand on back
  • Shoulder strap
  • Apple Pencil holder
  • Comes in several colors
Best Attachment Snap-In or lock-in for permanent mounting
Possible Attachment Velcro for quick change (not very secure, and holds the keyguard high off the screen), elastic straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
ipad-10th-gen.jpg

No Case For iPad 10th Gen 10.9 #0

When you order a keyguard for an iPad that is not in a case, choose "No Case" from the list of cases.

Best Attachment Velcro (if app has cells big enough to be partially blocked), suction cups (if app has cells big enough to be partially blocked), suction tape
Possible Attachment Elastic straps (last resort)
Not Suitable for Magnets, snap-In or lock-in 
otterbox-443.jpg

Otterbox Defender iPad 10th Gen 10.9 #443

This is a great case, but attachment options are not great.  If you have other case options, they may be better for making a keyguard.

  • Screen opening:  9-1/2" x 6-3/4", 242 mm x 171 mm
  • Outside dimensions (without stand): 10-3/16" x 7-1/2" x 9/16", 259 mm x 192 mm x 14 mm
  • Funky clip-on back piece removes to become a huge folding stand
  • Elastic skin over 2-part polycarbonate frame
  • Screen protector built in
Best Attachment
Possible Attachment Snap-in or lock-in for permanent mounting, but difficult if you need to take the keyguard on and off a lot. Elastic straps for a quick change (last resort).
Not Suitable for Suction cups, suction tape, Velcro, magnets
versawrap.jpg

PRC-Saltillo VersaWrap iPad 7th-8th-9th Gen 10.2, iPad Air 4/Air 5 10.9, iPad 10th Gen 10.9, iPad Pro 11, #431

This is a funky case that stretches different ways to accommodate different iPad sizes, so it seems a little weird when you first put in the iPad.  The screen opening ends up a different size for each different iPad size.  The 10th Gen stretches the case a lot, making it hard to get consistent measurements, but the screen opening measurements below are the closest to the average we can get.

  • Screen opening: 9-7/16" x 6-13/16", 240 mm x 174 mm
  • Outside dimensions (with handle): 10-7/16" x 9-3/16" x 1", 265 mm x 233 mm x 25 mm
  • Impact-resistant EVA material
  • Folding stand
  • Shoulder strap
  • Optional speaker
  • Pocket for adding an Apple AirTag
  • Comes in a variety of colors 
Best Attachment Snap-in, suction cups, suction tape
Possible Attachment Straps (last resort)
Not Suitable for Lock-in, Velcro, magnets

buddy-449.jpg

Pure Sense Buddy

Pure Sense Buddy is a variant of the classic EVA folding handle stand. It's different in that it includes a thin shoulder strap and an anti-microbial surface.

To order a keyguard for the Pure Sense Buddy, choose the matching  Classic EVA case above.

rantice-448.jpg

Rantice/ZoneFoker Kickstand iPad 10th Gen 10.9 #448

This case is sold under several different brand names.  You can tell it by the tippy off-center kickstand with the "XXX" pattern on the back.

When ordering a keyguard to fit this case, you'll find it on our list as the Rantice Kickstand case #448.

  • Screen opening: 9-1/4" x 6-11/16", 235 mm x 169 mm
  • Outside dimensions (without kickstand): 10-3/16" x 7-15/16" x 9/16", 259 mm x 201 mm x 13 mm
  • Hard shell with stiff elastic skin
  • Folding off-center kickstand
  • Comes in several colors
Best Attachment Snap-In
Possible Attachment Suction cups or suction tape (if grid permits), elastic straps (last resort)
Not Suitable for Lock-in, Velcro, magnets
ultimate-ii.jpg

RJ Cooper Ultimate II

The Ultimate II is a variant of the classic EVA folding handle stand. RJ Cooper's version adds a shoulder strap and a more sturdy stand.

To order a keyguard for the Ultimate II, choose the matching  Classic EVA case above.

seymac-469.jpg

SEYMAC Rotating Handle Stand iPad 10th Gen 10.9 #469

This case is sold under several different brand names.  One thing to note is that the small screen opening can require compromises on the keyguard design.  Items close to the edge of the screen may be hard to reach.

This case and the SEYMAC Rotating Ring Stand below are identical except for the handle stand. When ordering for either one, choose the SEYMAC Rotating Handle Stand #469 on the "To Fit Case" list.

  • Screen opening: 9" x 6-3/8", 231 mm x 162 mm
  • Outside dimensions (without rotating handle): 10-1/2" x 8-5/16" x 13/16", 267 mm x 211 mm x 21 mm
  • Removable front bezel with built-in screen protector
  • Rotating (360°) strap handle/stand on back
  • Thin shoulder strap
  • Stylus/pen holder on back
Best Attachment Snap-In or lock-in.  Keyguard comes on and off with the removable front bezel.
Possible Attachment Velcro, magnets (both hold the keyguard high off the screen), elastic straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
seymac-ring-469.jpg

SEYMAC Rotating Ring Stand iPad 10th Gen 10.9 #469

This case is sold under several different brand names.  One thing to note is that the small screen opening can require compromises on the keyguard design.  Items close to the edge of the screen may be hard to reach.

This case and the SEYMAC Rotating Handle Stand above are identical except for the handle stand.  When ordering for either one, choose the SEYMAC Rotating Handle Stand #469 on the "To Fit Case" list.

  • Screen opening: 9" x 6-3/8", 231 mm x 162 mm
  • Outside dimensions (without rotating handle): 10-1/2" x 8-5/16" x 13/16", 267 mm x 211 mm x 21 mm
  • Removable front bezel with built-in screen protector
  • Rotating (360°) ring handle/stand on back
  • Thin shoulder strap
  • Stylus/pen holder on back
Best Attachment Snap-In or lock-in.  Keyguard comes on and off with the removable front bezel.
Possible Attachment Velcro, magnets (both hold the keyguard high off the screen), elastic straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
shellbox-462.jpg

SHELLBOX Waterproof iPad 10th Gen 10.9 #462

  • Screen opening: 8-15/16" x 6-1/4", 227 mm x 159 mm
  • Outside dimensions (including pencil holder): 10-3/8" x 7-7/8" x 3/4", 263 mm x 199 mm x 20 mm
  • Stiff TPU skin over polycarbonate shell
  • Built-in screen protector
  • Apple pencil holder on one side
  • Available in several colors
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Elastic straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
supfive-473.jpg

SUPFIVE Rotating Handle Stand iPad 10th Gen 10.9 #473

Don't confuse this case with any of the very similar cases on this page.  This one is unique in its combination of the rotating Velcro handle/strap/stand, the giant "X" on the back, and the Apple pencil holder on top.  Measure to be sure this is the case you have!

  • Screen opening: 9" x 6-5/16", 229 mm x 160 mm
  • Outside dimensions (without rotating handle stand): 10-3/4" x 8-9/16" x 3/4", 273 mm x 218 mm x 21 mm
  • Hard shell with elastic skin
  • Rotating handle stand
  • Shoulder strap
  • Apple pencil holder on front
  • Comes in several colors   
Best Attachment Snap-in or Lock-in for semi-permanent installation
Possible Attachment Velcro for quick change (holds the keyguard high off the screen), elastic straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
suplik-476.jpg

SUPLIK Case w/ Built-In Screen Protector iPad 10th Gen 10.9 #476

  • Screen opening: 9-1/2" x 6-1/4", 229 mm x 159 mm
  • Outside dimensions (without handle stand): 10-3/4" x 8-1/8" x 7/8", 271 mm x 206 mm x 22 mm
  • Screen opening: 9-1/8" x 6-3/8", 232 mm x 162 mm
  • Outside dimensions (with handle): 10-5/8" x 9-1/2" x 1-1/4", 270 mm x 242 mm x 32 mm
  • Impact-resistant EVA material over hard plastic frame with built-in screen protector
  • Folding stands in back colors
  • Comes in a variety of colors
  • Comes in several colors   
Best Attachment Snap-In
Possible Attachment Velcro, elastic straps (last resort)
Not Suitable for Lock-in, suction cups, suction tape, magnets
techcircle-450.jpg

Techcircle Rotating Handle Stand iPad 10th Gen 10.9 #450

  • Screen opening: 9-1/2" x 6-1/4", 229 mm x 159 mm
  • Outside dimensions (without handle stand): 10-3/4" x 8-1/8" x 7/8", 271 mm x 206 mm x 22 mm
  • Hard shell with elastic skin
  • Rotating handle stand
  • Shoulder strap
  • Apple pencil holder on front
  • Comes in several colors   
Best Attachment Snap-In
Possible Attachment Velcro, elastic straps (last resort)
Not Suitable for Lock-in, suction cups, suction tape, magnets
beetle-400b.jpg

Unicorn Beetle Pro iPad 10th Gen 10.9 #400B

  • Screen opening: 9" x 6-1/4", 228 mm x 159 mm
  • Outside dimensions: 10-1/4" x 8" x 5/8", 260 mm x 203 mm x 16 mm
  • Polyurethane skin over polycarbonate shell
  • Built-in screen protector
  • Attached folding stand
  • Easiest rigid case to insert and remove iPad
  • Available in several colors
  • Affordable - the best value among rigid cases
Best Attachment Snap-In or lock-in for permanent mounting, Velcro for quick change
Possible Attachment Elastic straps (last resort)
Not Suitable for Suction cups, suction tape, magnets
zenrich-461.jpg

ZenRich/BRAECN Rotating Handle Stand iPad 10th Gen 10.9 #461

This case is sold under several different brand names. But it's easy to identify this case by the giant "X" on the back and the rotating Velcro strap stand.

Do not confuse this with the similar rotating ring stand above. This one has a Velcro strap on the back. That case has a rigid plastic ring stand centered on the back of the case.

When ordering a keyguard to fit this case, you'll find it on our list as the  BRAECN case #461.

zonefoker-448.jpg

ZoneFoker/Rantice Kickstand iPad 10th Gen 10.9 #448

This case is sold under several different brand names. You can tell it by the tippy off-center kickstand with the "XXX" pattern on the back.

When ordering a keyguard to fit this case, you'll find it on our list as the  Rantice Kickstand case #448.