This keyguard comes with no attachment method. While gravity will hold the keyguard in place, most users prefer to stick it to the keyboard with tape or a mounting putty like Blu-Tack. There is room for a small amount of suction tape.
Version - Choose either US English or UK English version.
Size - The default size of the keyguard is the same as the keyboard. You may optionally choose to add an oversized flange which adds an additional rim around the perimeter, extending beyond the keyboard and containing optional holes which you can use to devise your own mounting method. These holes are 0.19" in diameter and fit a #10 machine screw. Our screw kits fit these holes.
Material - The default material is laser-cut 3/16" clear acrylic. If you need a thinner keyguard, you can choose 1/8" acrylic styrene, but it makes for very shallow key openings. 1/4" acrylic is good for when you want deeper holes. For the ultimate in strength, choose polycarbonate, which has a lifetime guarantee against breakage and beveled edges which are softer to the touch than laser-cut keyguards.