Predictable KeyguardKeyguard AT
- Current Stock:
A keyguard for the Predictable app.
The image depicted is not what the keyguard will look like. There are way too many different screen configurations in the app for us to describe. When you order this keyguard, you must send us a screen capture for us to use to lay out the keyguard. A photograph is not acceptable. With the app running on the iPad in the configuration you want, press the home key and power button at the same time. The screen will flash white as the image is captured. You can find that image in your Photos app and email it to us. Here's a detailed explanation of capturing a screen shot.
App Settings and Options
Select Device - Select the version of iPad you have. If you don't know, see "How to Determine Which iPad You Have" below. This keyguard does not come with an iPad.
To Fit Case - Select the case that you have on your iPad. Select "None" if the iPad is not in a case. Select "Other" at the bottom of the list if your case is not on the list, and specify the case in the Special Instructions field. If you don't know which case you have, see our blog How to Identify an iPad Case. This keyguard does not come with an iPad case. You are specifying the case you already have.
Attachment - See "Important Notes About Cases and Keyguard Attachment" below.
Screen Capture - You must agree to submit a screen capture when you place the order. A picture is not an acceptable substitute. An image taken from the app's page on the App Store is not sufficient. In order to make the keyguard fit pixel-perfect, we need an actual screen capture.
Cell Openings - The default cell openings are rectangles with rounded corners, the same size as the cells. Elliptical openings are the same size as the cells. If you choose square or circular openings, they will be centered in the cells, reduced to fit in the cell. The extra space helps the user differentiate between the cells, and allows a little place for fingers to rest. If you choose anything other than full-sized rectangles, do not choose a colored material, as some information in the cells will be covered by the keyguard.
Reduce Openings To - By default, openings will be made as large as will fit the cell. If you specify a maximum opening size, the dimensions of the grid cells will be reduced so they are no bigger than the maximum you specified. If the cells would naturally be 1" wide and ".5" high, and you specified a maximum of 0.75", the cells would be reduced to 0.75" x 0.5". Round or square openings are reduced in both dimensions to the specified size. If the cells are already smaller than the specified size, nothing will change.
Material - The default acrylic styrene is more flexible than standard acrylics and is much less likely to crack when bent. It features a non-glare surface, a choice of several colors, and comes with a 2-year guarantee against breakage. In general, the colored acrylics work best for apps that provide space between the cells, and should be avoided on apps that don't provide any space between the cells. 3/16" and 1/4" acrylics are standard PMMA acrylics like Plexiglass and Perspex. They are more rigid than the 1/8" due to their extra thickness, and they provide more depth to help the user avoid accidental touches. Polycarbonate is the strongest material, being virtually unbreakable, and comes with a lifetime guarantee against breakage. Allow one extra week for polycarbonate. Learn about materials in more detail in our Keyguard Materials blog.
User ID - An optional HIPAA-compliant identifier to be engraved on the keyguard. Do not use full names. ID's may be up to 25 characters long.
Special Instructions - Use this field to communicate any other information we need to know about the keyguard. For example, if you've specified "Other" for an unlisted case, you can give us a link to the case online. On large orders, you can add the student's ID to help keep the keyguards straight (nothing will be added to the keyguard, only the documentation).
* Important Notes About Cases and Mounting - You Must Read This Before Ordering
Keyguards do not attach permanently to the iPad or the case, but are mounted with non-destructive attachments. See our blog All About Cases, Part Two for detailed information about specific cases and their suitability for keyguards. It is important that your keyguard is ordered to fit the case you have, or plan to use. If the exact case you use is not listed, choose "Other", and in the Comments field at the end of checkout give us the height and width of the case's screen opening. If you choose "the next closest thing", the keyguard won't fit, and you'll have to pay to remake it. Not sure which iPad case you have? This page describes How to Identify an iPad Case.
** The attachment methods are described briefly below with a list of some of the supported cases. See our All About Cases, Part One blog for a complete description of each attachment type. See All About Cases, Part Two for detailed information about specific cases and their suitability for keyguards. If you choose an attachment method that is not supported for your case, your order will be delayed while we contact you for a substitution.
Suction Cups - Four small suction cups raise the keyguard 3/16" above the screen and hold it securely. Check the blog to determine if suction cups will work with your case.
Attached Straps - Keyguard lies 1/8 - 1/4" above screen to minimize accidental touches. Good for heavy droolers. Check the blog to determine if straps will work with your case.
Flush-Mounted Straps - Keyguard lies flat on or barely above the screen. Check the blog to determine if straps will work with your case.
Snap-In Attachment - Slips under edge of case to secure without any external hardware. See it described here. May require partial disassembly of case to install the first time. This is a semi-permanent mount and cannot be easily swapped in an out on rigid cases. Check the blog to determine if the snap-in attachment will work with your case. Note: The snap-in attachment will interfere with the seal on cases that claim to be waterproof. Your iPad will be damaged if you wash it or submerge it.
Lock-In Attachment - This is a variation of the snap-in attachment where the tabs are placed on all four sides of the keyguard to make it more difficult for the end user to remove from the case. This will not prevent a determined user from forcing the keyguard out of the case, but it will deter them.
Velcro™ Attachment - An additional flange is attached to the perimeter of the keyguard for mounting with Velcro™. This is the best method to use if you want to add and remove the keyguard easily and/or often. Check the blog to determine if the top flange will work with your case.
*** Magnetic Attachment - This special version of the flange attachment contains magnets in the corners to securely hold the keyguard in place and make it simple to remove. Ideal for users who need to switch keyguards often. The only supported cases as of this writing are the AMDI iAdapter, the GoNow Rugged, and the Griffin Survivor All-Terrain. Check the blog to see if other cases are now supported for the magnetic attachment. Do not order this attachment if you have any other case.
How to Determine Which iPad You Have
On newer iPads, it's easy. Go to the Settings app General settings and tap "About". The Model Name is what you're looking for. Select that model from the "Device" pull down menu above.
On older iPads, use the Model Number, which is really a part number that looks something like "ML0N2LL/A". Do a Web search for that. On the back of your iPad there's also a very tiny model number that looks something like "A1538". Do a Web search for that, like "iPad A1538".
How to Determine Which iPad Case You Have
Believe it or not, we have over 250 iPad cases! Some of them are hard to tell apart, so we've added a page on How to Identify an iPad Case. If your case is there, note the red case number and use that to pick the right one from our list of cases.